 |
 |
 |
|
Pelco FT82011MSTR1 ONE 10BASE-T/, Ethernet Media Converter, Multimode, ST Connectorr
The FT82011MSTR1 is a media converter converts 10Base-T/ 100Base-TX Ethernet data to 100Base-FX Ethernet data and vice versa. Designed for point-to-point applications, the FT82011MSTR1 media converter provides one 10Base-T/100Base-TX port and one 100Base-FX fiber port. The FT82011MSTR1 media converters are used in combination with one another to provide wavelength compatibility. Using wavelength division multiplexing (WDM), bidirectional data is transported in a single fiber. The 100Base-FX fiber port is automatically forced to full-duplex 100 Mbps operation. Networking functions for the 10Base-T/ 100Base-TX port (RJ-45 twisted-pair copper port) are userselectable by means of a rotary switch.
Autonegotiation allows the port to automatically negotiate between 10 Mbps and 100 Mbps data rates and between full-duplex and half-duplex modes. If autonegotiation is not desired, the port can be forced to specific modes of operation: 10 Mbps or 100 Mbps data rate, half-duplex or full-duplex mode, and the enabling/disabling of flow control.
Specifications:
Model: FT82011MSTR1
Switch Type: Unmanaged Layer 2
Switch Method: Store and forward
Data Rate: 10/100 Mbps
Compliance: IEEE 802.3, 802.u, 802.3x
Interface: Auto MDI/MDI-X
Operating Mode: Half-duplex or full-duplex
Address Table Size: 1,024 MAC address entries with automatic learning and aging
Quality of Service: IEEE 802.1p priority, tag-based, 4 queues per port, weighted fair queuing scheduling
Maximum Frame Size: Untagged Ethernet frames up to 1,518 bytes Tagged Ethernet frames up to 1,522 bytes
Operating Temperature: -40° to 167°F (-40° to 75°C)
Input Power Requirements: 12 VDC or 24 VAC, 0.50 A
LED Indicators: Power: 100Base-FX Port Status (link/activity, FEFI)Optic Fault (opticsignal/laser status) 10Base-T/100Base-TX Port Status (2 LEDs: link/activity and speed, duplex/ collision and speed)
Dimensions: 8.75" D x 1.08" W x 4.81" H(22.23 x 2.74 x 12.22 cm)
Unit Weight: 1.6 lb (0.73 kg)
Shipping Weight: 3.0 lb (1.36 kg)
Connectors:Rack Power/Alarm: 1, 4-pin connector Stand-Alone Power: 1, 2-pin connector, screw terminal Electrical: 1, RJ-45, 10Base-T/100Base-TX Fiber Optic: 1, single-fiber ST or SC
Optical Power Budget: 26 dB
Maximum Transmission Distance: 2 km (1.2 mi)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Ethernet Media Converter: -One 10Base-T/100Base-TX Port -One 100Base-FX Port
- Converts 10Base-T/100Base-TX Ethernet Data to 100Base-FX Ethernet Data and Vice Versa
- Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
- Designed for Point-to-Point Applications
- User-Selectable 10Base-T/100Base-TX Port Functions: -Autonegotiation Between 10 Mbps and 100 Mbps Data Rates and Between Full-Duplex and Half-Duplex Modes -10 Mbps or 100 Mbps Selectable -Full-Duplex or Half-Duplex Mode Selectable -Enabling/Disabling of Flow Control
- Auto MDI/MDI-X (Medium Dependent Interface/Medium Dependent Interface Crossover) Operation
- Link-Down Detection
- Compliant with IEEE 802.3, 802.3u, and 802.3x Standards
- Multimode Fiber Support for Distances up to 2 km
- Single-Mode Fiber Support for Distances up to 46 km
- Laser Diode for Transmission of Optical Signals
- Environmentally Hardened
- Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- No Performance Adjustments Required
- 12 VDC or 24 VAC Power Supply
- Stand-Alone and Rack-Mountable Modular Design
- LED Indicators for Monitoring of Optic Signal/Laser Status, 100Base-FX Port Status Including Far End Fault Indication (FEFI), 10Base-T/100Base-TX Port Status, and Operating Power
|
|
|
|
|
|
|
|
|
