Home > Shop Brands > Pelco >

  Pelco PEL-FT8332SSTR Fiber Transmitter Receiver

Pelco PEL-FT8332SSTR Fiber Transmitter Receiver


 

Our Price : $16,763.55


Product Code: PEL-FT8332SSTR

Qty:

Description
 
The FT8332SSTR is a fiber transmitter and receiver provide the ability to transmit up to 32 composite video channels over one optical fiber. Using coarse wavelength division multiplexing (CWDM) technology, the FT8332 transmitter and the FR8332 receiver provide a costeffective solution for transmitting multiple channels over fiber by allowing multiple wavelengths to be transmitted in a single fiber. The FT8332 transmitter and the FR8332 receiver are available in multimode and single-mode versions.

Specifications:

Model: FT8332SSTR
Number of Channels: 32
Modulation Type: Pulse code modulation, 8-bit resolution
Video Input (FT8332)/Video Output (FR8332): 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM
Bandwidth: 6.5 MHz
Gain: Unity
Crosstalk: -50 dB typical at 3.58 MHz
Differential Gain: 1%
Differential Phase: 1.2
Tilt: 1%
Signal-to-Noise Ratio: >60 dB (CCIR weighted)
Relay Output: 30 VDC, 1 A Choice of normally open or normally closed
Operating Temperature: -40 to 167F (-40 to 75C)
Input Power Requirements: 12 VDC or 24 VAC, 280 mA
LED Indicators: Power, Video Present (per channel), Optic Fault
Dimensions: 16.7" D x 17.0" W x 1.7" H (42.4 x 43.2 x 4.3 cm)
Unit Weight: 11.4 lb (5.17 kg)
Shipping Weight: 19 lb (9 kg)
Video: BNC (per channel)
Rack Power: 6-pin connector
Stand-Alone Power: 5-mm barrel connector
Fiber Optic: ST for multimode and single-mode fiber
Auxiliary Relay: 3-pin header
Construction: Steel cabinet

Finish:

Bezel: gray metallic with black end caps
Chassis: black matte finish
Features
  • 8-Bit Digitally Encoded Video for High-Quality Multichannel Video Transmission over a Single Fiber
  • Multimode Fiber Support for Distances up to 1 km
  • Single-Mode Fiber Support for Distances up to 26 km
  • Exceeds All Requirements for the RS-250C Medium-Haul Transmission Specification
  • Coarse Wavelength Division Multiplexing (CWDM)
  • Compatible with NTSC, PAL, and SECAM Video Standards
  • Laser Diode for Transmission of Optical Signals
  • No Performance Adjustments Required
  • 12 VDC or 24 VAC Power Supply
  • Stand-Alone and Rack-Mountable Design
  • LED Indicators for Monitoring of Signal Status, Laser Status, and Operating Power

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please