Home > Shop Brands > Pelco >

  Pelco PEL-FT85011SFCR Fiber Transmitter Single Channel Digitally Encoded Video Bidirectional Data

Pelco PEL-FT85011SFCR Fiber Transmitter Single Channel Digitally Encoded Video Bidirectional Data


Our Price : $922.74

Product Code: PEL-FT85011SFCR


Pelco FT85011SFCR Fiber Transmitter, Single Channel Digitally Encoded Video, Bidirectional Data: Available in multimode and single-mode versions, the FT85011SFCR fiber transmitter provide the ability to transmit one unidirectional composite video channel and one bidirectional data channel over one optical fiber. In addition, patent-pending technology provides the solution for allowing Coaxitron pan/tilt/zoom (PTZ) control data to be transmitted the full distance of the fiber (up to 6 km for multimode fiber and up to 46 km for single-mode fiber). When using single-mode fiber, the FT85011SFCR transmitter offer an exceptional optical power budget of 28 dB.Modular in design, the FT85011SFCR unit can be rack mounted or can be used as stand-alone modules. Rack mounting is accomplished using the RK5000 Series rack mount chassis. Stand-alone modules can be placed on a desktop or can be mounted to a wall. In addition to compatibility with each other, the FT85011A transmitter are compatible with other fiber models. The FR85011A receiver is backward compatible with the FS85011 and FT85011 transmitters.


Model: FT85011SFCR
Number of Channels: 1
Modulation Type: Pulse code modulation, 8-bit resolution
Video Input / Video Output: 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM
Bandwidth: 6.5 MHz
Gain: Unity
Differential Gain: <2%
Differential Phase: <1
Tilt: <1%
Signal-to-Noise Ratio: >60 dB (CCIR weighted)
Number of Channels: 1
Data Communication: RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, Coaxitron
Maximum Baud Rate: 500 kbps
Operating Temperature: -40 to 167F (-40 to 75C)
Input Power Requirements: 12 VDC or 24 VAC, 300 mA
LED Indicators: Power, Video Present, Optic Fault, Data Tx, Data Rx
Dimensions: 8.75" D x 1.08" W x 4.81" H (22.23 x 2.74 x 12.22 cm)
Unit Weight: 1.48 lb (0.67 kg)
Shipping Weight: 3 lb (1.36 kg)
Video: BNC
Rack Power/Alarm: 4-pin connector
Standalone Power: 2-pin connector, screw terminal
Data: 9-pin connector, screw terminal
Fiber Optic: ST for multimode fiber ST or FC for single-mode fiber
  • 8-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
  • Bidirectional Data Channel That Supports RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, and Coaxitron Communication
  • Patent-Pending Transmission Technology Allowing Coaxitron Control at Full-Distance Capabilities
  • Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
  • Multimode Fiber Support for Distances up to 6 km
  • Single-Mode Fiber Support for Distances up to 46 km
  • Exceeds All Requirements for the RS-250C Medium-Haul Transmission Specification
  • Compatible with NTSC, PAL, and SECAM Video Standards
  • Meets NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
  • No Performance Adjustments Required
  • 12 VDC or 24 VAC Power Supply

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please