 |
 |
 |
|
Pelco FT86011SSTR 1 Channel Fiber Transmitter and Receiver, Single-Mode, ST Connector: The FT86011SSTR fiber transmitter and receiver provide simultaneous transmission of one unidirectional video channel, two bidirectional audio channels, one bidirectional data channel, and one bidirectional contact closure over one optical fiber. The FT86011SSTR transmitter receiver is available in single-mode versions.
Audio and data modes of operation are user selectable by means of a rotary switch. The FT86011SSTR transmitter and receiver can be used with balanced or unbalanced audio signals and allow selection of 600-ohm or 47K-ohm input impedance. Data selection offers a choice of RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, or Coaxitron communication. Using patentpending technology, Coaxitron pan/tilt/zoom (PTZ) control data can be transmitted the full distance of the fiber (up to 6 km for multimode fiber and up to 38 km for single-mode fiber).
Specifications:
Model: FT86011SSTR
Compatible Receiver: FR86011SSTR
Fiber Optic Connector Type: ST
Wavelength: 1310/1550 nm
Optical Power Budget: 24 dB
Maximum Transmission Distance: 38 km (23.6 mi)
Number of Video Channels: 1
Modulation Type: Pulse code modulation, 8-bit resolution
Video Input / Output: 1.0 Vp-p, 75 ohms, NTSC, PAL, and SECAM
Bandwidth: 6.5 MHz
Gain: Unity
Differential Gain: <1%
Differential Phase: <0.7°
Tilt: <1%
Signal-to-Noise Ratio: >60 dB (CCIR weighted)
Number of Audio Channels: 2
Audio Input / Output: 2.9 Vp-p maximum
Input Impedance: 600 ohms or 47K ohms, switch-selectable
Input/Output Connection: Balanced (600 ohms) or unbalanced (47K ohms)
Bandwidth: 20 kHz
Total Harmonic Distortion: <0.02%
Signal-to-Noise Ratio: >87 dB
Number of Data Channels: 1
Data Communication: RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, Coaxitron
Maximum Baud Rate: 500 kbps
Number of Contact Closure Channels: 1
Input: Active low
Output: 30 VDC, 1 A Choice of normally open or normally closed
Operating Temperature: -40° to 167°F (-40° to 75°C)
Input Power Requirements: 12 VDC or 24 VAC, 350 mA
LED Indicators: Power, Video Present, Audio Present, Data Activity, Contact Closure Activation, Optic Fault
Dimensions: 8.75" D x 1.08" W x 4.81" H (22.23 x 2.74 x 12.22 cm)
Unit Weight: 1.6 lb (0.73 kg)
Shipping Weight: 3 lb (1.36 kg)
Rack Power/Alarm Connectors: 4-pin connector
Stand-Alone Power Connectors: 2-pin connector, screw terminal
Video Connectors: BNC
Audio Connectors: 12-pin connector, tension clamps
Data Connectors: 8-pin connector, tension clamps
Contact Closure Connectors: 6-pin connector, tension clamps
Fiber Optic Connectors: ST for multimode fiber ST or FC for single-mode fiber
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 8-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
- Two Bidirectional 24-Bit Digitally Encoded Audio Channels with User-Selectable 600-Ohm Balanced or 47K-Ohm Unbalanced Input Impedance
- Bidirectional Data Channel with User-Selectable RS-232, RS-422, RS-485 (2-Wire/4-Wire), Manchester, Bi-Phase, and CoaxitronCommunication
- Bidirectional Contact Closure That Allows a Choice of Normally Open or Normally Closed Outputs
- Multimode Fiber Support for Distances up to 6 km
- Single-Mode Fiber Support for Distances up to 38 km
- Laser Diode for Transmission of Optical Signals
- Patent-Pending Transmission Technology Allowing Coaxitron Control at Full-Distance Capabilities
- Compatible with NTSC, PAL, and SECAM Video Standards
- Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- No Performance Adjustments Required
- 12 VDC or 24 VAC Power Supply
- Stand-Alone and Rack-Mountable Modular Design
- LED Indicators for Monitoring of Signal Status, Laser Status, Data Activity, Contact Closure Activation, and Operating Power
|
|
|
|
|
|
|
|
|
