Home > Shop Brands > Pelco >

  Pelco PEL-FX82052MSTR2 100Base-TX Unmanaged Ethernet Switch Multimode ST Connector

Pelco PEL-FX82052MSTR2 100Base-TX Unmanaged Ethernet Switch Multimode ST Connector


 

Our Price : $866.27


Product Code: PEL-FX82052MSTR2

Qty:

Description
 
The Pelco FX82052 unmanaged Ethernet switch provides five 10Base-T/100Base-TX ports and two 100Base-FX fiber ports for the transport of bidirectional Ethernet data. Versions are available that accept one or two multimode or single-mode fibers per fiber port.

Optimized for Point-to-Point Applications:

The FX82052 switch is designed for point-to-point and drop-and-repeat applications. In point-to-point applications, the second fiber port provides an optional redundant fiber link. Using the fiber redundancy option, the second fiber port (which is idle during regular operation) becomes operational if the primary fiber port fails. In drop-and-repeat applications, two fiber ports allow one or more Ethernet devices to be connected into a fiber optic daisy chain.

Autonegotiation:

Fiber ports are forced to full-duplex 100 Mbps operation. Networking functions for each of the five 10Base-T/100Base-TX ports (RJ-45 twisted-pair copper ports) are user-selectable by means of a rotary switch. Autonegotiation allows a 10Base-T/100Base-TX port to automatically negotiate between 10 Mbps and 100 Mbps data rates and between full-duplex and half-duplex modes. If autonegotiation is not desired, a port can be forced to specific modes of operation: 10 Mbps or 100 Mbps data rate, half-duplex or full-duplex mode, and the enabling/disabling of flow control. The auto MDI/MDI-X feature allows each RJ-45 port to connect to either a straight-through or crossover RJ-45 cable.

Rack Mountable:

Modular in design, the FX82052 unit can be rack mounted or can be used as a stand-alone module. Rack mounting is accomplished using the RK5000 Series rack mount chassis. As a stand-alone module, the unit can be placed on a desktop or can be mounted to a wall.

Specifications:

Channels: Switch Type: Unmanaged Layer 2
Modulation: Switching Method: Store and forward
Data Rate: 10/100 Mbps
Compliance: IEEE 802.3, 802.u, 802.3x
Interface: Auto MDI/MDI-X
Operating Modes: Half-duplex or full-duplex
MAC Address Table Size: 1,024 MAC address entries with automatic learning and aging
Quality of Service: IEEE 802.1p priority, tag-based, 4 queues per port, weighted fair queuing scheduling
Maximum: Frame Size Untagged Ethernet frames up to 1,518 bytes/Tagged Ethernet frames up to 1,522 bytes
Wavelength: 850/1310 nm
Optical Power Budget: 26dB
Maximum Transmission Distance: 1.2 Mile (2km)
Connectors: 5x RJ-45, 10Base-T/100Base-TX/2x Single-fiber ST connector
Power Requirements: 12VDC or 24VAC (includes 12VDC adapter)
Power Consumption: 500mA
Operating Temperature: -40 ~ 167F (-40 ~ +75C)
Dimensions (WxHxD): 2.3 x 4.8 x 8.8" (57 x 122 x 222mm)
Weight: 2.4 lbs (1.1kg)
Features
  • 5x 10Base-T/100Base-TX Ports
  • 2x 100Base-FX Ports (Fiber)
  • Single-Fiber (Per Port)
  • 1.2 Mile (2km) Range
  • Auto MDI/MDI-X
  • Environmentally Hardened
  • Meets NEMA TS 2 & Caltrans

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please