The Pelco EH3500 ImagePak Color Camera Kit (1.6-3.4mm Lens, Mount, Sunshield) consists of EH3508-2 enclosure, CCC1390H-6 Day/Night Camera, 13VD1-3 varifocal lens, EM1450 light-duty wall mount, and SS3508 sunshield.
The EH3508-2 is an indoor/outdoor 24VAC enclosure with built-in heater and defroster. The thermostatically controlled heater activates at 50°F (10°C) and switches off at 80°F (27°C), while the defroster operates continuously. With die-cast and extruded aluminum construction and gray polyester powder coat, the corrosion-resistant enclosure can withstand operating temperatures ranging from -10 to 120° F (-23 to 49° C).
The removable camera sled inside the enclosure can be easily accessed via the front hinged lid and the link-lock latch at the rear can be padlocked for security. The camera sled has multiple holes and can be inverted for additional camera elevation. Two adjustable (PG13.5) glands on the bottom make installation of power and video cables easy. The enclosure is CE-compliant, UL/cUL-listed and meets NEMA Type 4 and IP66 standards.
The CCC1390H-6 Day/Night camera includes a 1/3" format Sony SS-2WD CCD Imager and offers a high resolution of 530TVL (B&W) / 480TVL (Color). With a minimum illumination of 0.8 lux (color mode) and 0.08 lux (B&W mode), the camera offers features such as Auto White Balance, Automatic Gain Control, and Backlight Compensation. The camera uses a removable IR (infrared) cut filter to switch between color and B&W as per the ambient changes in lighting. The compact camera has a standard CS lens mount, and can be used with fixed, manual, or DC-drive auto iris lenses. The auto iris is controlled through a standard 4-pin square connector (included).
Thanks to the WDR (Wide Dynamic Range) technology that offers 60 db of dynamic range, superior images are produced over a wide range of lighting conditions, including extreme backlight conditions. You can access on-screen programmable menus locally using the rear panel button or remotely using any Pelco controller with Pelco P/Pelco D protocol. These menus can be used to select a specific profile or to customize and save camera settings for the specific application.
The camera features electronic shutter control (ESC), flickerless mode, and autosensing power (24 VAC with internal line lock or 12 VDC with internal synchronization). The camera is quick and easy to install; moreover, its compact size makes it ideal for Pelco's DomePak, and ImagePak fixed camera dome/enclosure packages.
Connecting via the included 4-pin plug, the 13VD1-3 CS mount lens features a direct-drive auto iris and has 2.1x optical zoom (manual). The manual focus lens comes with a spot filter and has a focal length of 1.6-3.4mm. A relative aperture size between f/1.4 and f/360 allows the intraspot-type lens to perform across a wide range of lighting conditions.
The EM1450 is made from die-cast aluminum with gray polyester powder coat finish for indoor/outdoor use. The light-duty wall mount supports a maximum load of 20 lbs (9 kg) and can also be used for pole mounting with the PA101 adaptor. The enclosure is mechanically positioned on the adjustable head.
The SS3508 sunshield protects the EH3508 enclosure from direct sunlight and reduces the internal temperature by approximately 10° F (-12.22° C).
EH3508-2 Indoor/Outdoor Enclosure (24VAC):
-Includes built-in heater and defroster
-Thermostatically controlled heater activates at 50°F (10°C) and switches off at 80°F (27°C)
-Defroster operates continuously
-Die-cast and extruded aluminum construction with gray polyester powder coat finish
-Front hinged lid provides easy access to the removable camera sled with multiple holes
-Link-lock latch can be used with a padlock for security
-Can be inverted for additional camera elevation
-Two adjustable (PG13.5) glands on the bottom make installation of power and video cables easy
-CE-compliant, UL/cUL-listed and meets NEMA Type 4 and IP66 standards
CCC1390H-6 Day/Night Camera:
-1/3" format Sony SS-2WD CCD imager with 768(H) x 494(V) pixels
-Digital signal processing
-High resolution - 530TVL (B&W) / 480TVL (color)
-Minimum illumination - 0.08 lux (B&W) and 0.8 lux (color mode)
-24VAC or 12VDC
-4 preset application profiles with 1 user-definable profile
-Auto white balance - takes a standard white color reference to adjust the RGB (red, green, and blue) colors to produce good quality images in a wide range of lighting conditions
-Automatic gain control - adjusts the signal strength to maintain a constant brightness level
-Backlight Compensation - adjusts video gain to correct the exposure when the object being captured is in front of a bright light source
-Removable IR (infrared) cut filter to switch between color and B&W
-Includes standard CS lens mount for use with fixed, manual, or DC-drive auto iris lenses
-WDR technology - offers 60 db of dynamic range producing superior images over a wide range of lighting conditions, including extreme backlight conditions
-Access on-screen programmable menus locally or remotely
-Electronic shutter control - ability to control the integration (of light) time to the sensor to less than 1/60 second; e.g. stop motion of moving traffic.
-Flicker-less mode - avoids the annoying visual phenomena mainly related to the interlacing of video fields, which show up as small vibrations on the screen
-Autosensing power (24VAC with internal line lock or 12VDC with internal synchronization)
-Selectable electronic PTZ
-Quick and easy installation
-Compact body style
13VD1.6-3.4 Varifocal Lens:
-CS mount lens
-Standard square 4-pin plug for easy installation
-Direct-drive auto iris and 2.1x optical zoom (manual)
-Spot filter and focal length of 1.6-3.4 mm
-Relative aperture size between f/1.4 and f/360
-Intraspot-type lens - optimizes the dynamic range of the iris
-Minimum object distance - 0.2 m
EM1450 Light-duty Wall Mount:
-Die-cast aluminum construction with gray polyester powder coat finish for indoor/outdoor use
-Maximum load - 20 lbs (9 kg)
-Can be adapted for pole mount applications with use of PA101 adaptor
-Adjustable head for mechanical positioning of the enclosure
-Protects EH3508 enclosure from direct sunlight
-Reduces the internal temperature by approximately 10° F (-12.22° C)
Image Sensor: 1/3" interline transfer CCD
Resolution: 530TVL (B&W) / 480TVL (Color)
Pixels: 768 (H) x 494 (V)
Lens: 1.6-3.4 mm auto iris IR varifocal lens (13VD1-3)
Iris Operation: Camera supports auto iris DC/Video lenses
Minimum Illumination: 0.8 lux (color mode) and 0.08 lux (B&W mode)
Synchronizing System: Internal or line lock
Video Output: 1 Vp-p, 75 ohms
Operating Temperature: 14 to 122°F (-10 to 50°C)
Weight (without Lens): 0.44 lb (0.20 kg)
Construction: Extruded and die-cast aluminum with gray polyester powder coat finish
-Meets NEMA Type 4 standards
-Meets IP66 standards
-U.S. Patent 307,915
Cable Entry: 2 PG13.5 compression glands on bottom; 0.47-inch (1.19 cm) maximum cable diameter
Environment: Indoor/outdoor -10 to 120°F (-23 to 49°C)
Pan/Tilt Adjustment: 360° and ±75°
- EH3508-2 Enclosure (24VAC)
- CCC1390H-6 Day/Night Camera
- 13VD1-3 Varifocal Lens (1.6-3.4mm)
- EM1450 Light-duty Wall Mount
- SS3508 Sunshield
- Indoor/Outdoor Enclosure with Heater
- Removable Camera Sled for Easy Access
- Camera Uses Removable IR Cut Filter
- Wide Dynamic Range - 60 db
- Lens Comes with a Spot Filter