Pelco's G3508-2KWV3AW ImagePak combines a camera, housing, and lens in a single kit, saving you the time and effort involved in putting together an outdoor camera system on your own.
To speed up the installation process, the camera comes pre-fitted with the lens, and is also pre-adjusted for backfocus. You'll also appreciate the way the camera can be easily inserted and removed from the housing via its front-opening hinged lid. There's also a rear link-lock latch that you can use with a padlock to secure the housing from unauthorized access.
Aside from these convenience factors there's also value in this kit, as all Pelco ImagePaks are offered at a discounted package price. Another great benefit of the ImagePak design is that, unlike integrated-style cameras, all of its major components are also available for separate purchase. This way you can easily swap, replace or upgrade a particular component of the ImagePak without having to purchase a whole new system, thus preserving at least part of your original investment.
ImagePaks are available in many different configurations to suit virtually any lighting or scene requirement. And with a name like Pelco you can be sure that whatever configuration you choose to go with, you can count on it to deliver the level of performance and integrity necessary to properly secure a business or home environment.
Day Night + Wide Dynamic Range
The CCC1390H-6 is a compact, wide dynamic range (WDR), day/night camera. Its WDR technology provides up to 60dB of dynamic range and produces superior images over a wide range of lighting conditions, including extreme backlight conditions. The camera also uses a removable infrared (IR) cut filter to switch between color and black-white (B-W) modes as environmental lighting conditions change. It also provides a dual resolution of 530 TVL (B-W) and 480 TVL (color).
On-screen programmable menus can be accessed locally using the rear panel button or remotely using any Pelco controller with Pelco P or Pelco D protocol. Use these menus to select a specific profile or to customize and save camera settings for the specific application.
The camera has a standard CS-mount and can be used with fixed, manual, or DC-drive auto iris lenses. The auto iris is controlled through a standard four-pin square connector that is included with all Pelco auto iris lenses.
Small, contemporary design
-Die-cast and extruded aluminum construction
-Forward opening hinged lid
-Rear link-lock latch
-Easy access for servicing and installation
-Cable entry glands and mounting holes on bottom of enclosure
Signal System: NTSC
Image Sensor: 1/3" Color Sony SS-2WD CCD
Resolution: 480 TVL
Number of Pixels: 768 x 494
Lens: 3-8mm Auto Iris DC Lens (13VD3-8)
Iris Operation: Camera supports auto iris DC lenses
-B-W (SENS 40x): 0.002 lux, F1.2, 40 IRE, AGC on, 75% scene reflectance
-Color (SENS 40x): 0.02 lux, F1.2, 40 IRE, AGC on, 75% scene reflectance
-B-W: 0.08 lux, F1.2, 40 IRE, AGC on, 75% scene reflectance
-Color: 0.8 lux, F1.2, 40 IRE, AGC on, 75% scene reflectance
-Digital Slow Shutter (SENS) (selectable: on/off; 2x, 4x, 6x, 8x, 10x, 20x, 40x)
-Electronic PTZ (selectable: 1.5x, 2.0x, 2.5x)
-Automatic Gain Control (selectable: on/off)
-Backlight Compensation (selectable: on/off)
-Flickerless Mode (selectable: on/off; 1/100 sec)
-Auto White Balance (selectable: on/off, 4 modes)
-Day/Night (selectable: on/off, 4 modes)
-Digital Signal Processing
-Gamma Correction (selectable: on/off, 0.45, 0.6, 1.0)
-White Balance (2,500 to 8,600 °K)
Sync: Internal or Line Lock
Video Output: BNC
Audio Output: N/A
Motion Detection: No
Alarm I/O: No
Control Ports: N/A
Power Requirements: (camera only) 12VDC or 24VAC
Operating Temperature: (without housing) 14 - 122°F (-10 ~ +50°C)
Dimensions (WxHxD): (camera only) 2.1 x 2.2 x 2.7" (53 x 56 x 69mm)
Weight: (camera only) 0.4 lbs (0.2kg)
-Housing Construction: Aluminum with Gray Polyester Powder Coat
-Rating: Meets NEMA Type 4 and IP66 Standards
-Heater: Built-In Heater/Defroster
-Power Requirements: 24VAC
-Power Consumption: 20W
-Operating Temp: -10 ~ 120°F (-23 ~ +49°C)
-Dimensions (HxD): 3.9 x 10.8" (130 x 273mm)
-Weight: 2.8 lbs (1.3kg)