 |
 |
 |
|
The Pelco EH3500 ImagePak Color Camera Kit (2.5-6mm Lens, Mount, Sun Shield) consists of a EH3512-2 enclosure, a C10DN-6 Day/Night Camera, 13VD2.5-6 varifocal lens, EM1450 light-duty wall mount, and SS3512 sun shield.
The EH3512-2 is an indoor/outdoor 24 VAC enclosure with built-in heater, blower and defroster. The thermostatically controlled heater activates on at 50°F (10°C) and switches off at 80°F (27°C), while the defroster operates continuously. With die-cast and extruded aluminum construction and gray polyester powder coat, the corrosion-resistant enclosure can withstand operating temperatures ranging from -10 to 120° F (-23 to 49° C). The removable camera sled inside the enclosure can be easily accessed via the front hinged lid and the link-lock latch at the rear can be padlocked for security. The camera sled has multiple holes and can be inverted for additional camera elevation. Two adjustable (PG13.5) glands on the bottom make installation of power and video cables easy. The enclosure is CE compliant, UL/cUL Listed and meets NEMA Type 4 and IP66 standards.
The C10DN-6 Day/Night camera has a 1/3" CCD color image sensor and offers a high resolution of 540TVL, With a minimum illumination of 0.3 lux (color mode) and 0.07 lux (B&W mode), the camera is suited for low-level night time surveillance. The camera uses a removable IR cut filter to switch between color and black & white per the changes in ambient lighting.The compact camera has a standard CS lens mount, and can be used with fixed, manual, or auto iris (DC or video drive) lenses.
Area masking, titling, pixel correction, and preset lighting profiles can be selected through the on-screen menu, using the side joystick. Automatic gain control adjusts the signal strength to maintain a constant brightness level. Backlight compensation adjusts video gain to correct the exposure when the object being captured is in front of a bright light source. Auto white balance takes a standard white color reference to adjust the RGB (red, green, and blue) colors to produce good quality images in a wide range of lighting conditions. The auto iris is controlled through a standard 4-pin square connector (included).
The camera features ESC (Electronic Shutter Control), flickerless mode, and autosensing power (24 VAC with internal line lock or 12 VDC with internal synchronization) and offers long distance cable compensation.
Connecting via the included 4-pin plug, the 13VD2.5-6 CS mount lens features a direct-drive auto iris and has 2.4x optical zoom (manual). The manual focus lens comes with a spot filter and has a focal length of 2.5-6mm. A relative aperture size between f/1.4 and f/125 allows the intraspot-type lens to perform across a wide range of lighting conditions.
The EM1450 is made from die-cast aluminum with gray polyester powder coat finish for indoor/outdoor use. The light-duty wall mount supports a maximum load of 20 lbs (9 kg) and can also be used for pole mounting with the PA101 adaptor. The enclosure is mechanically positioned on the adjustable head.
The SS3512 sun shield protects the EH3512 enclosure from direct sunlight and reduces the internal temperature by approximately 10° F (-12.22° C).
EH3512-2 Indoor/Outdoor Enclosure (24 VAC):
-Includes built-in heater, blower and defroster
-Thermostatically controlled heater activates on at 50°F (10°C) and switches off at 80°F (27°C)
-Defroster operates continuously
-Die-cast and extruded aluminum construction with gray polyester powder coat finish
-Front hinged lid provides easy access to the removable camera sled with multiple holes
-Link-lock latch can be used with a padlock for security
-Can be inverted for additional camera elevation
-Two adjustable (PG13.5) glands on the bottom make installation of power and video cables easy
-CE compliant, UL/cUL Listed and meets NEMA Type 4 and IP66 standards
C10DN-6 Day/Night Camera:
-1/3" color CCD image sensor with 768 x 494 pixels
-Digital signal processing
-Horizontal resolution of 540TVL
-Minimum illumination -0.3 lux (color mode) and 0.07 lux (B&W)
-On-screen menu configuration with side joystick
-Standard CS lens mount
-Autosensing DC Drive Auto Iris
-Autosensing power (24 VAC with internal line lock or 12 VDC with internal synchronization)
-Automatic gain control -adjusts the signal strength to maintain a constant brightness level
-Auto white balance -takes a standard white color reference to adjust the RGB (red, green, and blue) colors to produce good quality images in a wide range of lighting conditions
-Analog eclipser function
-Electronic shutter control (ESC)
-Flickerless mode -avoids the annoying visual phenomena mainly related to the interlacing of video fields, which show up as small vibrations on the screen
-Long distance cable compensation
-Internal top/bottom mount
-CS lens mount
13VD2.5-6 Varifocal Lens:
-CS mount lens
-Standard square 4-pin plug for easy installation
-Direct-drive auto iris and 2.4x optical zoom (manual)
-Spot filter and focal length of 2.5-6 mm
-Relative aperture size between f/1.4 and f/125
-Intraspot-type lens -optimizes the dynamic range of the iris
-Back focal length of 8.72 -14.24 mm mm
EM1450 Light-duty Wall Mount:
-Die-cast aluminum construction with gray polyester powder coat finish for indoor/outdoor use
-Maximum load -20 lbs (9 kg)
-Can be adapted for pole mount applications with use of PA101 adaptor
-Adjustable head for mechanical positioning of the enclosure
SS3512 Sun Shield:
-Protects EH3512 enclosure from direct sunlight
-Reduces the internal temperature by approximately 10° F (-12.22° C)
Specifications:
Camera:
Image Sensor: 1/3" CCD
Resolution: 540TVL
Pixels: 768 (H) x 494 (V)
Lens: 2.5-6 mm auto iris IR varifocal lens (13VD2.5-6)
Iris Operation: Camera supports auto iris DC/Video lenses
Minimum Illumination:
Color -0.3 lux, f/1.2, 40 IRE, AGC on, 75% scene reflectance
B&W -0.07 lux, f/1.2, 40 IRE, AGC on, 75% scene reflectance
Controls:
-AGC (selectable)
-Backlight Compensation
-AWB (selectable)
Synchronizing System: AC line lock/internal
Signal to Noise Ratio: >50 dB
Video Output: 1 Vp-p, 75 ohms
Operating Temperature: 14 to 122°F (-10 to 50°C)
Weight (without Lens): 0.44 lb (0.20 kg)
Housing:
Construction Extruded and die-cast aluminum with gray polyester powder coat finish
Rating:
-CE compliant
-UL/cUL Listed
-Meets NEMA Type 4 standards
-Meets IP66 standards
-U.S. Patent 307,915
Cable Entry 2 PG13.5 compression glands on bottom; 0.47-inch (1.19 cm) maximum cable diameter
Environment Indoor/outdoor -10 to 120°F (-23 to 49°C)
Pan/Tilt Adjustment 360° and ±75°
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- EH3512-2 Enclosure (24VAC)
- C10DN-6 Day/Night Camera
- 13VD2.5-6 Varifocal Lens (2.5-6mm)
- EM1450 Ligh-duty Wall Mount
- SS3512 Sun Shield
- Auto Iris Lens with 2.4x Optical Zoom
- Indoor/Outdoor Enclosure with Heater
- Removable Camera Sled for Easy Access
- Automatic Gain Control / White Balance
- Lens Comes with a Spot Filter
|
|
|
|
|
|
|
|
|
