The Pelco EH3500 ImagePak Color Camera Kit (3-8mm Lens, Mount & Sun Shield) consists of an EH3512-2HD enclosure, an SS3512 sun shield, a C10DN-6 digital camera, a 13VD3-8 varifocal lens, and an EM1450 light-duty wall mount.
The EH3512-2HD is an indoor/outdoor 24VAC enclosure with built-in heater and defroster. The thermostatically controlled heater activates at 50°F (10°C) and switches off at 80°F (27°C), while the defroster operates continuously. With die-cast and extruded aluminum construction and a gray polyester powder coat, the corrosion-resistant enclosure can withstand operating temperatures ranging from -10 to 120° F (-23 to 49° C). The removable camera sled inside the enclosure can be easily accessed via the front hinged lid and the link-lock latch at the rear can be padlocked for security. The camera sled has multiple holes and can be inverted for additional camera elevation. Two adjustable (PG13.5) glands on the bottom make installation of power and video cables easy. The enclosure is CE-compliant, UL/cUL-listed and meets NEMA Type 4 and IP66 standards.
The C10DN-6 Day/Night camera has a 1/3" CCD color image sensor and offers a high resolution of 540TVL. With a minimum illumination of 0.3 lux (color mode) and 0.07 lux (B&W mode), the camera is suited for low-level night time surveillance. The camera uses a removable IR cut filter to switch between color and B&W as per the ambient changes in lighting. The compact camera has a standard CS lens mount, and can be used with fixed, manual, or auto iris (DC or video drive) lenses.
Area masking, titling, pixel correction, and preset lighting profiles can be selected through the on-screen menu, using the side joystick. Automatic gain control adjusts the signal strength to maintain a constant brightness level. Backlight compensation adjusts video gain to correct the exposure when the object being captured is in front of a bright light source. Auto white balance takes a standard white color reference to adjust the RGB (red, green, and blue) colors to produce good quality images in a wide range of lighting conditions. The auto iris is controlled through a standard 4-pin square connector (included).
The camera features electronic shutter control (ESC), flicker-less mode, and autosensing power (24VAC with internal line lock or 12VDC with internal synchronization) and offers long distance cable compensation.
Connecting via the included 4-pin plug, the 13VD3-8 CS mount lens features a direct-drive auto iris and has 2.7x optical zoom (manual). The manual focus lens comes with a spot filter and has a focal length of 3-8mm. A relative aperture size between f/1.0 and f/360 allows the intraspot-type lens to perform across a wide range of lighting conditions.
The EM1450 light-duty wall mount is made from die-cast aluminum with a gray polyester powder coat finish for indoor/outdoor use. The light-duty wall mount supports a maximum load of 20 lbs (9 kg) and can also be used for pole mounting with the PA101 adaptor. The enclosure is mechanically positioned on the adjustable head.
Device Type CCTV camera
Camera Mount Type Wall mount
Width 2.9 in
Depth 10 in
Height 3 in
Type Color - Yes - Fixed - Yes
Video Format NTSC
Horizontal Resolution (TV Lines) 540
Exposure Range 1/60 sec - 1/100000 sec
Minimum Illumination 0.3 ANSI lumens lux - Color - F1.2 - 40 IRE - AGC on / 75% reflectance, 0.07 ANSI lumens lux - B&W - F1.2 - 40 IRE - AGC on / 75% reflectance
Auto gain control,
Auto white balance,
Automatic electronic shutter,
Type CCD 1/3"
Type CS-mount - Vari-focal
Optical Zoom 2.7
Focal Length 3 mm - 8 mm
Lens Iris Auto iris ( DC ), ( Video )
Video Composite video
Expansion / Connectivity
Interfaces 1 x Video - Composite video output - BNC
Compatible Slots None
Included Accessories Sunshield, Wall mount bracket
Compliant Standards :
FCC Class B certified,
CE Class B,
Power Requirements DC 12 V / AC 24 V
- Small, Contemporary Design
- Die Cast and Extruded Aluminum Construction
- Forward Opening Hinged Lid
- Rear Link-lock Latch
- Cable Entry Glands and Mounting Holes on Bottom of Enclosure
- Designed for Indoor/Outdoor Applications
- Easy Access for Servicing and Installation
- Compact Body Style
- Day/Night with Automatic or Manual Control
- 1/3-inch Format CCD Imager
- Digital Signal Processing
- 540 TV Lines
- On-Screen Menu Configuration with Side Joystick
- 4 Preset Application Profiles; 1 User-Difinable Profile
- Automatic White Balance, Automatic Gain Control, Electronic Shutter Control, and Backlight Compensation
- Flickerless Mode
- Autosensing DC Drive Auto Iris
- CS lens Mount (C-Mount Lenses Require Optional Adaptor)
- Autosensing 24 VAC/12 VDC with Line Lock or Internal
- Long Distance Cable Compensation
- Internal Top/Bottom Compensation
- Eclipser Function