 |
 |
 |
|
G35H2-2CLV3AW IPAK EH3512-2HD/CC3751H-2. he Pelco EH3500 ImagePak Color Camera Kit (3-8mm Lens) consists of EH3512-2HD enclosure, CC3751H-2 digital camera, 13VD3-8 varifocal lens, and EM1450 wall mount.
The EH3512-2HD is an indoor/outdoor 24VAC enclosure with built-in heater and defroster. The thermostatically controlled heater activates at 50°F (10°C) and switches off at 80°F (27°C), while the defroster operates continuously. With die-cast and extruded aluminum construction and a gray polyester powder coat, the corrosion-resistant enclosure can withstand operating temperatures ranging from -10 to 120° F (-23 to 49° C). The removable camera sled inside the enclosure can be easily accessed via the front hinged lid and the link-lock latch at the rear can be padlocked for security. The camera sled has multiple holes and can be inverted for additional camera elevation. Two adjustable (PG13.5) glands on the bottom make installation of power and video cables easy. The enclosure is CE-compliant, UL/cUL-listed and meets NEMA Type 4 and IP66 standards.
The CC3751H-2 Digital CCD Color Camera has a 1/3" CCD image sensor and offers a resolution of 480TVL. With low-light technology and a minimum illumination 0.01 lux at f/1.2, the camera is suited for low-level nighttime surveillance, and the extended DSS (Digital slow shutter) settings improve the low-light performance of the camera. Four DSS settings reduce the frame-rate speed and increase the camera's sensitivity in low-light conditions. As the number of field increases, the light sensitivity also increases. The camera accepts DC and video drive auto iris lenses or fixed/manual iris lenses, and has adjustable back focus to support all C/CS mount lenses. The 24VAC/12VDC compact camera has shorter overall length and can be used with Pelco's smaller enclosures like EH100, EH3500, EH2500, EH2020, and EH2100.
Automatic gain control adjusts the signal strength to maintain a constant brightness level. Automatic backlight compensation adjusts video gain to correct the exposure when the object being captured is in front of a bright light source. The camera also includes features such as electronic shutter control, line lock with phase adjustment, enhanced sharpness, and long line compensation.
The lockable thumb wheel is accessible from the top or bottom of the camera and makes for easy back focus adjustment. The easy-to-install camera has a quick-connect power connection, BNC video connector, and a removable mount adaptor for top or bottom mounting.
Connecting via the included 4-pin plug, the 13VD3-8 varifocal lens is a CS mount lens that features a direct-drive auto iris and has 2.7x optical zoom (manual). The manual focus lens comes with a spot filter and has a focal length of 3-8mm. A relative aperture size between f/1.0 and f/360 allows the intraspot-type lens to perform across a wide range of lighting conditions.
The EM1450 is made from die-cast aluminum with gray polyester powder coat finish for indoor/outdoor use. The light-duty wall mount supports a maximum load of 20 lb (9 kg) and can also be used for pole mounting with the PA101 adaptor. The enclosure is mechanically positioned on the adjustable head.
Specifications:
Camera:
Image Sensor: 1/3" interline transfer CCD
Resolution: 480TVL
Pixels: 768 (H) x 494 (V)
Lens: 3-8 mm auto iris IR varifocal lens (13VD3-8)
Iris Operation: Camera supports auto iris DC/Video lenses
Minimum Illumination: 0.01 lux, f/1.2, 40 IRE, AGC on, 75% reflectance
Signal to Noise Ratio: 50 dB
Power Requirements: 18-30 VAC or 10-36 VDC
Video Connector: BNC
Controls:
AGC (selectable)
Backlight Compensation
AWB (selectable)
Eclipser Function
Flickerless Mode
Video Output: 1 Vp-p, 75 ohms
Power Consumption: Less than 3.3 watts
Operating Temperature: 14 to 122°F (-10 to 50°C)
Weight (without Lens): 0.77 lb (0.35 kg)
Lens:
Focal Length: 3-8 mm
Zoom: 2.7x
Relative Aperture (f): f/1.0 and f/360
Angle of View Diagonal: 44.9-117.9°
Horizontal: 36-91°
Vertical: 27-67°
MOD: 0.2m
Back Focal Distance: 8.36mm
Filter Size: N/A
Unit Weight: 0.09 lb (0.04 kg)
Housing:
Construction: Extruded and die-cast aluminum with gray polyester powder coat finish
Rating:
CE-compliant
UL/cUL-listed
Meets NEMA Type 4 standards
Meets IP66 standards
U.S. Patent 307,915
Cable Entry: 2 PG13.5 compression glands on bottom; 0.47" (1.19 cm) maximum cable diameter
Environment: Indoor/outdoor: -10 to 120°F (-23 to 49°C)
Pan/Tilt Adjustment: 360° and ±75°
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Small, Contemporary Design
- Die Cast and Extruded Aluminum Construction
- Forward Opening Hinged Lid
- Rear Link-lock Latch
- Cable Entry Glands and Mounting Holes on Bottom of Enclosure
- Designed for Indoor/Outdoor Applications
- Easy Access for Servicing and Installation
- Lowlight Technology
- Compact Body Style, Shorter Overall Than Most Full-Featured CCD Cameras
- 1/3-Inch Format CCD Imager
- C/CS Lens Mount
- 24 VAC/12 VDC Power
- Line Lock With Phase Adjustment
- Backlight Compensation
- Horizontal Resolution of 480 TV Lines
- For Use with Direct Drive and Auto Iris Lenses or Fixed/Manual Iris Lenses
- Removable Top/Bottom Mount
- Low Profile Mounting Block
- Optional Integral Feedthrough Mount
|
|
|
|
|
|
|
|
|
