Home > Shop Brands > Pelco >

  Pelco PEL-HS2500 Enclosure High Security Indoor Medium-C

Pelco PEL-HS2500 Enclosure High Security Indoor Medium-C


Our Price : $333.97

Product Code: PEL-HS2500


The HS2500 is a high security enclosure designed for indoor use in applications such as parking garages, stairwells, detention cells, or other areas requiring maximum protection from vandalism. The HS2500 ?ts ?ush to the ceiling in a corner, but can be mounted lower on the wall and still retain its effectiveness. The hinged front cover is supplied with an impact-resistant clear Lexan window.

Constructed from medium gauge steel, the HS2500 will accept most CCD cameras with ?xed focal length and auto-iris lenses. There is no exposed mounting hardware securing the enclosure to its mounting surface. Opening the enclosure can be accomplished only by removing the two tamper-resistant screws near the bottom and lifting the cover. A factory-installed tamper switch is mounted on the secured access cover.

Options for this enclosure include a thermostatically controlled heater kit (24 or 120 VAC), and 3.5-inch (8.89 cm) square, 12-watt, 8-ohm speaker for optional audio surveillance or two-way communication.


Window: 0.25-inch (6.35 mm) thick Lexan
Camera Mounting: Adjustable tilt table
Maximum Camera and Lens Size: 3.00" H x 3.00" W x 10.00" L (7.62 x 7.62 x 25.40 cm)
Enclosure Mounting: Six 0.39-inch (0.99 cm) diameter holes on protected rear surface
Cable Entry: Four 0.50-inch (1.27 cm) conduit openings on mounting surfaces (access through back)
Security: Tamper-resistant screws
Tamper Switch: Plunger type door switch with "pull-to-cheat" feature


Electrical Connection: One 6-position terminal block

Tamper Switch:
0.25-inch (0.63 cm) quick connect N.O./N.C.
10A maximum switching current
125 VAC maximum switching voltage


Construction: 0.074-inch (1.87 mm) thick formed/welded 14-gauge steel
Finish: Gray polyester powder coat
Environment: Indoor (covered) 32 to 120F (0 to 49C)
Weight: 13.07 lb (5.93 kg)
Shipping Weight: 16 lb (7.24 kg)


UL Listed
CE compliant (HK8000 and HK8024 only)
Meets NEMA Type 1 standards
  • Vandal Resistant
  • Indoor (Covered), Corner Installation
  • No Exposed Mounting Hardware
  • All-Steel Construction (14-Gauge)
  • Prewired Speaker, 3.5 Inches Square
  • Tamper Switch Standard Feature

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please