 |
 |
 |
|
Camera System incorporates a camera and lens package into a small, high-security enclosure. All models are quick and easy to install in a variety of indoor or outdoor applications. They are ideal for residential, office, mall, hospital, school, parking garage, correction and detention, and other medium/ high-security installations subject to vandalism.
The 100 Series System (surface-mount dome) is designed to install directly to a hard surface (such as a ceiling or wall) or 4-square electrical box using the adapter plate or standard mud rings. The base of the unit has an opening for a conduit fitting in the back and a threaded 3/4-inch conduit opening in the side.
Camera System features plug-in camera modules that allow the enclosure to be installed and wired for power and video prior to installation of the camera. This unique feature means camera and lens are out of the way - and protected - during installation. In addition, domes with smoked bubble may be purchased without the camera module for "dummy" applications. (See component model numbers.)
All models are designed for either 12 VDC or 24 VAC operation. They are factory set for 24 VAC operation; a simple jumper change before connecting power configures the camera for 12 VDC operation.
Camera options include 1/3-inch format CCD color imager (standard or high resolution) and monochrome imager (standard resolution) with fixed focal length lenses of 2.9 mm, 6 mm, 8 mm, and 12 mm. Cameras with a varifocal lens have a 1/4-inch format high resolution CCD color imager.
Specifications:
Electrical:
Input Voltage: 12 VDC or 24 VAC (±10%)
Power Consumption:
Camera: <3 watts
Heaters: 10 watts when active; thermostatically controlled
Video Connector: BNC
General:
Cable Entry:
ICS100 Series: One 3/4-inch (1.91 cm) NPT threaded opening on side; one 3/4-inch (1.91 cm) opening on base
Pan/Tilt Adjustment:
-Manual
-360° pan; 180° tilt
Environmental:
Environment: Low temperature, indoor/outdoor
Operating Temperature: -50°F to 122°F (-46°C to 50.00°C); de-ices to -10°F (-23°C)
Thermostat Operation: Heater is thermostatically controlled to activate ON at 50°F (10°C) and OFF at 80°F (27°C)
Physical:
Construction: Aluminum with steel camera mounting bracket and polycarbonate dome
Finish:
ICS100 Series Light gray polyester powder coat
Dimensions:
ICS100 Series:
-Base: 3.70 (H) x 5.30 (W) inches (9.40 x 13.46 cm)
-Bubble: 3.75 in. Diameter
Weight: ICS100 Series 2.20 lb (1.00 kg)
Certifications:
CE and FCC, Class A (models with monochrome cameras only, excluding auto iris models)
CE and FCC, Class B (models with color cameras only, excluding auto iris models)
UL listed to Standard 2044
cUL to CSA C22.2 No.1
Meets IP66 when installed properly
Plenum rated (ICS150 Series)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Fully-Integrated Enclosure with Camera and Lens
- Rugged, High-Impact and Vandal Resistant, Puncture Proof Domes
- Easy to Install; Camera Module Easy to Remove
- Versatile Models for Surface or In-Ceiling Mounting
- Tamper-Resistant Hardware
- 12 VDC or 24 VAC Operation
- Circuitry Protected Against Incorrect Jumper Placement
- Low-Temperature Operation to -50°F (-46°C);De-ices to -10°F (-23°C)
- Manual Pan and Tilt Adjustments
- Available with Smoked or Clear Dome(1.5 f-stop Light Loss with Smoked Dome)
- Models with Clear Dome Include Black Dome Liner forDiscreet Viewing
- NTSC/PAL or EIA/CCIR Camera Formats
- All Color Cameras Feature Digital Signal Processing
- Fixed Focal Length Lens of 2.9 mm, 6 mm, 8 mm,or 12 mm
- Varifocal Lens of 3 mm to 6 mm with Auto Iris Available with High Resolution Color Camera
- AC Line Lock with All Color Cameras in 24 VAC Operation
- All Lenses, Except Varifocals, are Pre-focused at the Factory
- Meets NEMA 4X and IP66 Standards (when installed)
- Plenum Rated (ICS150 Series)
|
|
|
|
|
|
|
|
|
