Home > Shop Brands > Pelco >

  Pelco PEL-ICS100CRV3A Surface Mount Camclosure High Resolution Color Smoked with Auto Iris Verifocal 3-6mm

Pelco PEL-ICS100CRV3A Surface Mount Camclosure High Resolution Color Smoked with Auto Iris Verifocal 3-6mm


 

Our Price : $374.87


Product Code: PEL-ICS100CRV3A

Qty:

Description
 
The 100 Series System (surface-mount dome) is designed to install directly to a hard surface (such as a ceiling or wall) or 4-square electrical box using the adapter plate or standard mud rings. The base of the unit has an opening for a conduit fitting in the back and a threaded 3/4-inch conduit opening in the side.

Camera System features plug-in camera modules that allow the enclosure to be installed and wired for power and video prior to installation of the camera. This unique feature means camera and lens are out of the way - and protected - during installation. In addition, domes with smoked bubble may be purchased without the camera module for "dummy"applications. (See component model numbers.)

All models are designed for either 12 VDC or 24 VAC operation. They are factory set for 24 VAC operation; a simple jumper change before connecting power configures the camera for 12 VDC operation.

Camera options include 1/3-inch format CCD color imager (standard or high resolution) and monochrome imager (standard resolution) with fixed focal length lenses of 2.9 mm, 6 mm, 8 mm, and 12 mm. Cameras with a varifocal lens have a 1/4-inch format high resolution CCD color imager.

Specifications:

Signal System: NTSC or PAL
Imaging Device: 1/4-inch Interline Color CCD

Scanning System: 2:1 Interlace

Sync System:
-12 VDC: Internal
-24 VAC: External (VD lock)

Horizontal Resolution:
-NTSC: 480 TV lines
-PAL: 480 TV lines

Signal-to-Noise Ratio: 48 dB (AGC Off)
Min. Illumination Sensitivity: Less than 1.2 lux (f1.2)
Video Out: 1 Vp-p Composite (75 ohms)

Gain Control: On/Off by DIP switch (0-20 dB)

Exposure: Automatic control with DC iris meter (1/60 - 1/100,000)
White Balance: Auto or manual (switch selectable)
Backlight Compensation: Auto; adjusts AGC and AES
Power Source: 12 VDC, 24 VAC
Features
  • Fully-Integrated Enclosure with Camera and Lens
  • Rugged, High-Impact and Vandal Resistant, Puncture Proof Domes
  • Easy to Install; Camera Module Easy to Remove
  • Versatile Models for Surface or In-Ceiling Mounting
  • Tamper-Resistant Hardware
  • 12 VDC or 24 VAC Operation
  • Circuitry Protected Against Incorrect Jumper Placement
  • Low-Temperature Operation to -50°F (-46°C); De-ices to -10°F (-23°C)
  • Manual Pan and Tilt Adjustments
  • Available with Smoked or Clear Dome (1.5 f-stop Light Loss with Smoked Dome)
  • Models with Clear Dome Include Black Dome Liner for Discreet Viewing
  • NTSC/PAL or EIA/CCIR Camera Formats
  • All Color Cameras Feature Digital Signal Processing
  • Fixed Focal Length Lens of 2.9 mm, 6 mm, 8 mm, or 12 mm
  • Varifocal Lens of 3 mm to 6 mm with Auto Iris Available with High Resolution Color Camera
  • AC Line Lock with All Color Cameras in 24 VAC Operation
  • All Lenses, Except Varifocals, are Pre-focused at the Factory


Browse for more products in the same category as this item:

Shop Brands > Pelco