Home > Shop Brands > Pelco >

  Pelco PEL-ICS101CR36 Camclosure Surface Mount Color High Resolution NTSC 3.6mm

Pelco PEL-ICS101CR36 Camclosure Surface Mount Color High Resolution NTSC 3.6mm


 

Our Price : $646.30


Product Code: PEL-ICS101CR36

Qty:

Description
 
The ICS110 Series Camclosure integrated camera system combines an environmental cover, back box, camera, lens, and lower dome into a small, high-security system that is quick and easy to install. The system is perfect for a variety of indoor and outdoor applications and its versatile design allows for multiple mounting options.

Specifications:

General:

Construction: Aluminum with steel camera mounting bracket and polycarbonate dome
Finish: Light gray polyester powder coat

Light Attenuation
Smoked: 1.5 F-stops light loss
Clear: Zero light loss
Unit Weight: 2.20 lb (1.00 kg)
Shipping Weight: 4.0 lb (1.81 kg)

Electrical:
Input Voltage: 12 VDC or 24 VAC (10%), autosensing

Power Consumption:
Camera: Less than 3 watts
Heaters: 10 watts when active; thermostatically controlled

Mechanical:
Cable Entry: One 0.75-inch (1.91 cm) NPT threaded opening on side; two 0.75-inch (1.91 cm) openings on base
Pan/ Tilt Adjustment: Manual
Pan: 360
Tilt: 180; 80: 20 to 100 range (WDR models only)
Rotation: 360

Video:

Signal System
Monochrome: EIA or CCIR
Color: NTSC or PAL
Video Connectors: One composite BNC One composite BNC and one UTP(WDR models only)
Service Connector: 3-conductor, 2.5 mm connector for video output to optional ICS090-SC cable (WDR models only)

Environmental:

Environment: Low temperature, indoor/outdoor
Operating Temperature: -50F to 122F (-46C to 50C); de-ices to 25F (-4C)
Thermostat Operation: Heater is thermostatically controlled to activate ON at 50F (10C) and OFF at 80F (27C)

Certifications/Ratings/Parents:

CE and FCC, Class A (models with black-white cameras)
CE and FCC, Class B (models with color cameras only)
UL Listed
UL Listed to Canadian safety standards
Meets NEMA Type 4X and IP66 standards
Tested in accordance with MIL-STD 810E as follows:
-Shock test; Section 516.4
-Humidity test; Sections 520.1 and 507.3
-Vibration test; Section 514.4
ASTM Shipping Standard
ISTA Shipping Standard
Features
  • Fully-Integrated Enclosure with Camera and Lens
  • Rugged, High-Impact, Vandal-Resistant, Puncture-Proof Domes;Tamper-Resistant Hardware
  • Available with Wide Dynamic Range (WDR) Technology (102 dB Typical/120 dB Maximum)
  • Available with LowLight
  • DSS Technology (Down to 0.025 lux)
  • Camera Module Options: Color WDR, Color High Resolution, Color LowLight, Color or Monochrome Standard Resolution
  • WDR Models Include Both Composite and Unshielded Twisted Pair(UTP) Outputs and Progressive Scan Mode
  • Six Lens Options: 2.9 mm, 3.6 mm, 6 mm, 8 mm, 12 mm, 3-9 mm Vari?ocal
  • Easy to Install; Camera Module Easy to Adjust and Remove
  • Meets NEMA Type 4X and IP66 Standards
  • 12 VDC or 24 VAC Operation, Autosensing
  • Available with Smoked or Clear Dome

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please