Home > Shop Brands > Pelco >

  Pelco PEL-ICS200MA8 Wedge Blank and White ST

Pelco PEL-ICS200MA8 Wedge Blank and White ST


Our Price : $222.97

Product Code: PEL-ICS200MA8


The ICS200 Series Camclosure Integrated Camera System incorporates a camera and lens package into a small, "wedge" style enclosure. The system is quick and easy to install in a variety of indoor or outdoor applications. It is ideal for residential, of?ce, mall, hospital, school, parking garage, correction and detention, and other medium-security installations subject to vandalism. The ICS200 Series Systemcan be mounted directly to a wall, ceiling, or corner using the optional ICS200-CM Corner Mount.

Installation options include using a ?xed or adjustable mounting pattern. An adjustable pattern increases the pan adjustment 24 degrees.The ICS200 Series Integrated Camera System has a manual pan adjustment of 10 degrees and manual tilt adjustment of 5 degrees above horizontal to 20 degrees below horizontal. The unit is factory set for 24 VAC operation, but can be con?gured for 12 VDC with just a simple jumper adjustment. Camera options include 1/3-inch format CCD color imager (standard or high resolution) and monochrome imager (standard resolution) with ?xed focal length lenses of 2.9 mm, 3.6 mm, 6 mm, 8 mm, and 12 mm. Color camera lens options include ?xed focal without iris, ?xed focal with auto iris, or varifocal with auto iris. Cameras with a varifocal lens have a 1/4-inch format high resolution CCD color imager.


Input Voltage: 12 VDC or 24 VAC (10%)
Power Consumption
Camera: L e s s t h a n 3 watts
Heaters: 10 watts when active; thermostatically controlled
Video Connector: BNC


Cable Entry: One 3/4-inch (1.9 cm) threaded conduit
opening on rear;
One 5/8-inch (1.58 cm) opening through
gasket on base

Pan/Tilt Adjustment Manual:
10 pan;
5 above horizontal to 20 below horizontal
additional 24 pan adjustment when
installing using the adjustable mounting
pattern in base


Environment: Low temperature, indoor/outdoor Operating
Temperature: -50 to 122F (-46 to 50C); de-ices to -10F (-23C)
Thermostat Operation: Heater is thermostatically controlled to activate on at 50F (10C) and off at 80F (27C)

Construction: Aluminum base and cover, steel camera mounting bracket
Finish: Gray polyester powder coat
Unit Weight: 1.25 lb (0.57 kg)
Shipping Weight: 2.0 lb (0.90 kg)

Optional mount:

ICS200-CM: Corner mount speci?cally designed for the 200 Series system. Perfect for installing the ICS200 in a tight area such as a stairwell, hallway, or elevator.
  • Fully-Integrated Enclosure With Camera and Lens Package
  • Rugged, High-Impact and Vandal-Resistant
  • Easy to Install; Camera Module Easy to Remove
  • Mounts to Ceiling, Wall or Corner
  • Tamper-Resistant Hardware
  • Circuitry Protected Against Incorrect Jumper Placement
  • Concealed Cabling
  • 12 VDC or 24 VAC Operation
  • Low-Temperature Operation to -50F (-46C);
  • De-ices to -10F (-23C)
  • Clear Window
  • NTSC/PAL or EIA/CCIR Camera Formats
  • All Color Cameras Feature Digital Signal Processing
  • Color and Monochrome Cameras Available with 2.9 mm, 3.6 mm,
  • 6 mm, 8 mm, or 12 mm Fixed Focal Lenses
  • Standard and High Resolution Color Cameras Available with Fixed
  • Focal Auto Iris Lenses
  • Varifocal Lenses of 3-6 mm or 4-9 mm with Auto Iris, Available with High Resolution Color Camera
  • Meets NEMA Type 4 and IP66 Standards When Installed with Supplied Mounting Plate

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please