 |
 |
 |
|
The ICS210 Series Camclosure integrated camera system incorporates a camera and lens package into a small, "wedge"style enclosure. The system is quick and easy to install in a variety of indoor or outdoor applications. It is ideal for residential, of?ce, mall, hospital, school, parking garage, correction and detention, and other medium-security installations subject to vandalism.
The ICS210 Series is designed with a microporous membrane vent that equalizes the internal and external pressure differential of the enclosure. The vent offers enhanced ingress protection by repelling water and dust but still allowing for the free passage of vapors to prevent condensation within the enclosure.
The ICS210 Series System can be mounted directly to a wall, ceiling, or corner using the optional ICS210-CM Corner Mount. Installation options include using a ?xed or adjustable mounting pattern. An adjustable pattern increases the pan adjustment 24 degrees.
The ICS210 Series integrated camera system has a manual pan adjustment of ±10 degrees and manual tilt adjustment of 5 degrees above horizontal to 20 degrees below horizontal. The unit is factory set for 24 VAC operation, but can be con?gured for 12 VDC with just a simple jumper adjustment.
Camera options include 1/3-inch format CCD color imager (standard or high resolution) and black-white imager (standard resolution) with ?xed focal length lenses of 2.9 mm, 3.6 mm, 6 mm, 8 mm, and 12 mm. Color camera lens options include ?xed focal length without iris, ?xed focal length with auto iris, or varifocal length with auto iris. Cameras with a varifocal lens have a 1/4-inch format high resolution CCD color imager.
Specifications:
Signal System: EIA or CCIR
maging Device: 1/3-inch CCD
Scanning System: 2:1 Interlace
Sync System: Internal
Horizontal Resolution:
EIA: 420 TV lines
CCIR: 420 TV lines
Signal-to-Noise Ratio: 50 dB
Min. Illumination: 0.1 lux (f2.0)
Video Out: 1 Vp-p Composite (75 ohms)
Gain Control: Auto
Exposure: Electronic Shutter (1/60 - 1/100,000)
White Balance: Not applicable
Backlight Compensation: Auto
Power Source: 12 VDC, 24 VAC
Electrical:
Input Voltage: 12 VDC or 24 VAC (±10%), auto-sensing
Power Consumption: 3 watts or less
Video Connector: BNC
General:
Pan/Tilt Adjustment
Pan: 360°
Tilt: 140° (20° to 160° range)
Rotation: 360°
Construction:
Back Box and Surface Mount Ring: ABS plastic
Bubble: Polycarbonate
Finish: White or black
Dimensions: Refer to dimension drawings
Environment: Indoor
Operating Temperature: 32°F to 120°F (0° to 49°C)
Weight
Unit: 1.25 lb (0.57 kg)
Certifications:
CE and FCC, Class A (models with black-white cameras)
CE and FCC, Class B (models with color cameras only)
UL Listed
UL Listed to Canadian safety standards
Meets NEMA Type 4X and IP66 standards
Tested in accordance with MIL-STD 810E
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Fully-Integrated Enclosure With Camera and Lens Package
- Rugged, High-Impact and Vandal-Resistant
- Easy to Install; Camera Module Easy to Remove
- Mounts to Ceiling, Wall or Corner
- Tamper-Resistant Hardware
- Circuitry Protected Against Incorrect Jumper Placement
- Concealed Cabling
- 12 VDC or 24 VAC Operation
- Low-Temperature Operation to -50°F (-46°C); De-ices to -10°F (-23°C)
- Clear Window
- NTSC/PAL or EIA/CCIR Camera Formats
- All Color Cameras Feature Digital Signal Processing
- Color and Monochrome Cameras Available with 2.9 mm, 3.6 mm, 6 mm, 8 mm, or 12 mm Fixed Focal Lenses
- Standard and High Resolution Color Cameras Available with Fixed Focal Auto Iris Lenses
- Varifocal Lenses of 3-6 mm or 4-9 mm with Auto Iris, Available with High Resolution Color Camera
- Meets NEMA Type 4 and IP66 Standards When Installed with Supplied Mounting Plate
|
|
|
|
|
|
|
|
|
