Pelco IEE20DN-OCP1 Sarix Extended Platform Network Fixed Rugged Environmental Dome Camera 2.1 MegaPixel Day/Night No-Lens Clear Dome OV Event Counting Plus Suite. The IEE20 Series extended platform (EP) camera with Sarix technology is a 2.1 megapixel (MPx) network indoor/outdoor rugged fixed dome camera designed with industry-leading image quality and high performance processing power. The IEE20 Series is also equipped with a mechanical IR cut filter for superior performance in low-light conditions. Its sturdy metal construction is vandal and tamper resistant and is designed for worry-free use in a wide range of environmental operating conditions.
The IEE20 Series is perfect for use in environmental air handling spaces. The back box is plenum rated per 2008 NEC article 300.22(C)(2).
Sarix technology defines the next generation of video security imaging performance, delivering high definition (HD) resolution, advanced low-light capabilities, consistent color science, and fast processing power. The H.264 compression video files are considerably smaller making high definition video more affordable.
The IEE20 Series can be ordered with or without lenses. All models include a camera in an outdoor enclosure that can be recessed into a ceiling. Accessories are available to allow mounting directly to a surface or in pendant configuration. These cameras accept a wide range of megapixel varifocal CS-mount lenses.
The IEE20 Series supports two simultaneous video streams. The two streams can be compressed in MJPEG and H.264 formats across several resolution configurations. The extended platform gives realtime video (30 ips) with HD resolution using H.264 compression for optimized bandwidth and storage efficiency. The streams can be configured in a variety of frame rates, bit rates, and group of pictures (GOP) structures for additional bandwidth administration.
The IEE20 Series is simple to install, and the automatic back focus control feature makes sharp scene focus setup easy with the bubble on or off. A convenient video setup jack eliminates the need to use a laptop for viewing video when installing the camera.
Pelco Analytic Suites and ObjectVideo (OV) Analytic Suites enhance the flexibility and performance of the IEE20 Series camera. Pelco's Camera Sabotage behavior is a standard feature of seven models, including the IEE20DN-0, IEE20DN-1, IEE20DN8-1 and all models that are preloaded with Pelco Analytic Suites. IEE20 Series models are also available preloaded with OV Analytic Suites.
Pelco Analytic Suites are easy to configure for alarm notification when used with Endura or a third-party system that supports Pelco's Analytics application programming interface (API). OV Analytic Suites offer rule configurations and alarm notifications that are easy to enable when using OV Ready systems.
The IEE20 Series uses a standard Web browser for powerful remote setup and administration. Up to 16 cameras can be viewed on the same network.
The IEE20 Series supports up to four blanked windows. Window blanking is used to conceal user-defined privacy areas that cannot be viewed by an operator. A blanked area will appear on the screen as a solid gray window.
The IEE20 Series easily connects to Pelco IP and hybrid systems such as Endura version 2.0 (or later) and Digital Sentry version 4.3 (or later). The camera also features open architecture connectivity to third-party software. Pelco offers an API that enables third-party systems to interface with Pelco's network cameras.
Imaging Device: 1/3-inch (effective)
Imager Type: CMOS
Imager Readout: Progressive scan
Maximum Resolution: 1920 x 1080
Signal-to-Noise Ratio: 50 dB
Auto Iris Lens Type: DC drive
Electronic Shutter Range: 1 ~ 1/100,000 sec
Wide Dynamic Range: 60 dB
White Balance Range: 2,000° to 10,000°K
Sensitivity f/1.2; 2850°K; SNR >24 dB
Color (1x/33 ms): 0.5 lux
Color SENS (15x/500 ms): 0.12 lux
Mono (1x/33 ms): 0.25 lux
Mono SENS (15x/500 ms): 0.03 lux
Clear: Zero light loss
Smoked: f/1.0 light loss
Construction: Cast aluminum body with polycarbonate bubble
Finish: Light gray powder coated
Weight (without lens):
Unit 3.3 lb (1.5 kg)
Shipping 5.0 lb (2.3 kg)
Available Languages: Chinese, English, French, German, Italian, Portuguese, Russian, Spanish, and Turkish
RJ-45 connector for 100Base-TX Auto
Cable Type: Cat5 or better for 100Base-TX
Power Input: 18 to 30 VAC; 24 VAC nominal or PoE (IEEE 802.3af class 3)
Power Consumption: <7W; <40 W with heater operation
PoE: <140 mA maximum
24 VAC: <510 mA without heater operation; , <2.5 A maximum with heater operation
Local Storage: Micro SD
Alarm Input: 10 VDC maximum, 5 mA maximum
Alarm Output: 0 to 15 VDC maximum, 75 mA maximum
External 3-connector, 2.5 mm provides
NTSC/PAL video output
Accessory Port: Connects Pelco accessories
Audio: Bi-directional: half duplex Line level/external microphone input; 600 Ohm differential, 1 Vp-p max signal level
Compression: G.711 PCM 64 kbit/s
Lens Mount: CS mount, adjustable
Tilt: 160° (10° to 170°)
Operational Temperature: 22° to 122°F (-30° to 50°C); PoE operates
between: 32° to 122°F (0° to 50°C), 24 VAC power is required for heater operation below 32°F (0°C) Thermostat Operation Heater thermostatically controlled to operate below <41°F (<5°C)
Operational Humidity: 20% to 80%, noncondensing
Impact Resistance: IK10++ per EN62262 (70J)
Video Encoding: H.264 high, main, or base profile and MJPEG
Video Streams: Up to 20 simultaneous streams; the second stream is variable based on the setup of the primarystream
Frame Rate Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5, 4, 3, 2, 1 (dependent upon coding, resolution, and stream configuration)
Additional Resolutions: 640 x 512, 640 x 352, 480 x 368, 480 x 272, 320 x 256, and 320 x 176
Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, and 802.1x (EAP)
Security Access: Password protected
Software Interface: Web browser view and setup
Processor: Intel Core 2 Duo microprocessor, 2.6 GHz
Operating System: Microsoft Windows XP, Windows Vista, or Mac OS X 10.4 (or later)
Memory: 2 GB RAM
Network Interface Card: 100 megabits (or greater)
Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
CE, Class B
FCC, Class B
- Open IP Standards
- Up to 1.3 Megapixel Resolution (1280 x 1024)
- Up to 30 Images per Second (ips) at 1280 x 720
- Auto Back Focus
- H.264 and MJPEG Compression Capability
- Color and Day/ Night Models
- Video Setup Jack
- Sensitivity Down to 0.03 Lux
- Power over Ethernet (IEEE 802.3af) or 24 VAC
- Up to 2 Simultaneous Video Streams
- Built-In Analytics
- Local Storage (Mini SD) for Alarm Capture