 |
 |
 |
|
The IP111CWV22 Camclosure Integrated Camera System from Pelco combines an environmental cover, back box, camera, lens, and lower dome into a small, high-security system. The system is easy to install in a variety of indoor and outdoor applications; applications that include malls, hospitals, schools, and other medium-security installations subject to vandalism.
The system is perfect for multiple mounting options, and supports both BNC and unshielded twisted pair (UTP) video wiring. The IP111CWV22 Camclosure Integrated Camera System includes a color, wide dynamic range camera type with a 9-22mm, day/night Varifocal, Auto Iris Lens. The IP111CWV22 can be installed directly to a ceiling, wall, 4S electrical box (using the optional ICS110-AP adapter plate), or a standard plaster ring. The system has three conduit openings: two in the base and a threaded 0.75-inch (1.91 cm) opening in the side.
-The IP111CWV22 Camclosure integrated camera system combines an environmental cover, back box, camera, lens, and lower dome into a small, high-security system that is quick and easy to install:
-The IP111CWV22 includes the following specifications: indoor/outdoor dome, vandal resistant, surface-mount, clear bubble, and a gray finish
-The IP111CWV22 offers a color, wide dynamic range camera type with 9-22mm, day/night Varifocal, Auto Iris
-The system is perfect for a variety of indoor and outdoor applications and its versatile design allows for multiple mounting options
-The unit supports both BNC and unshielded twisted pair (UTP) video wiring
-The system can be installed directly to a ceiling, wall, 4S electrical box (using the optional ICS110-AP adapter plate), or a standard plaster ring
-The system has three conduit openings: two in the base and a threaded 0.75-inch (1.91 cm) opening in the side
Specifications:
Signal System: NTSC
Image Sensor: 1/3-inch pixel based imager
Number of Pixels: 720 x 540 = 388,800
Resolution: 720 x 540
Lens: 9-22mm, day/night Varifocal, Auto Iris
Iris Operation: Auto
Minimum Illumination:
-Color (day): 0.8 lux
-SENS 8X: 0.2 lux
Signal-to-Noise Ratio: 53dB
Pan Angle: 360°
Pan Speed: Manual
Tilt Angle: 80° (20 to 100° range)
Tilt Speed: Not Specified by Manufacturer
Preset Positions: Not Specified by Manufacturer
Microphone: No
Controls: RJ-45 connector for 100Base-TX Auto MDI/MDI-X
Video Output: Internal to Housing 3-Connector, 2.5mm Connector Providing NTSC/PAL Video Outputs
Audio Output: Not Specified by Manufacturer
Motion Detection: Yes
Sync System: Yes
Communication Port: RJ-45
Communication Protocol: 100Base-TX Auto MDI/MDI-X
Alarm I/O:
-Alarm Input: 10 VDC Maximum, 5 mA Maximum
-Alarm Output: 0 to 15 VDC Maximum, 75 mA Maximum
Power Requirements: 24 VAC (18-36) or PoE (IEEE802.3 af)
Power Consumption:
-PoE: <7.5 W, <13 W with Heaters
-24 VAC: <7.5 W, <14 W with Heaters
Operating Temperature: -50 to 122°F (-46 to 50°C); de-ices to 25°F (-4°C)
Dimensions (WxHxD): 5.5 x 5.28 x 3.79" (140 x 134 x 96mm)
Weight: 2.20 lbs (1kg)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Small, High-Security System
- Clear Bubble with Liner
- 9-22mm, day/night Varifocal, Auto Iris
- Quick and Easy to Install
- Indoor and Outdoor Applications
- Versatile Design
- Supports Both BNC & UTP Video Wiring
|
|
|
|
|
|
|
|
|
