 |
 |
 |
|
Pelco's remote monitor kit (IPS-RMK), remote data port (IPS-RDPE-2), and remote monitor cable (IPS-CABLE) are ?eld service tools designed to assist in the installation and servicing of Spectra III SE/Spectra III, ExSite, Esprit, or any pan/tilt that uses Pelco's D protocol. Use these tools at the installation site to observe video, verify the operation of the PTZ controls, check the address and baud settings, and program the positioning system. Software upgrades* also can be performed with Spectra III SE/Spectra III/ Spectra Mini domes and ExSite systems.
The IPS-RMK is a complete kit consisting of a 5.6-inch, TFT-LCD, battery-powered monitor; PDA handheld; carrying case; interface cables (including the IPS-CABLE and IPS-MINIADPT); and software. The kit plugs directly into the RJ-45 port of the Spectra III SE/ Spectra III dome drive or the data port of the Spectra Mini dome drive for full control, setup, and upgrade capabilities. The IPS-RMK, when used with an IPS-RDPE-2, can also control pan/tilt/zoom functions and program a Spectra, ExSite, or Esprit positioning system or any other system that accepts Pelco's D protocol.
The IPS-RDPE-2 remote data port brings all the functionality of the IPS-RMK and IPS-CABLE to ground level. The remote data port works with Spectra III , ExSite, and Esprit Series systems. The IPS-RDPE-2 is compatible with coaxial video and UTP video control systems using D, P, or Coaxitron protocols.
The IPS-CABLE (part of the IPS-RMK) can be ordered separately for those who wish to connect their own PC or PDA and monitor directly to the RJ-45 port of the IPS-RDPE-2 or the Spectra III SE/Spectra III dome drive. It is compatible with most serial cable/connectors for Windows -based PCs, Palm OS compatible handhelds, and iPAQ pocket PCs. The IPS-MINIADPT adapter cable can be ordered separately for use with the IPS-CABLE or for use with IPS-RMK kits shipped prior to the introduction of the Spectra Mini dome system.
Specifications:
Palm OS Compatible Handheld:
Size: 4.7" H x 3.1" W x .7" D (11.9 x 7.9 x 1.8 cm)
Display: Advanced LCD with backlight
Expansion: Serial port
HotSync: Serial cradle
Software: Spectra III Programming, PTZ control, and HotSync technology for local and remote synchronization with your PC
Monitor:
Display: 5.6" diagonal, TFT-LCD, active matrix
Backlight: Built-in (CCFT)
Input Signal: NTSC/PAL (selectable)
Dot Format: 960 (H) x 234 (V) dots
Dot Pitch: 0.120 mm (H) x 0.360 mm (V)
Brightness Rating: 200 cd/m2 (Nit)
Number of Pixels: 224,640 dots
Contrast Ratio: 100:1
Viewing Angle L/R/T/B: 40°/40°/10°/30°
Pixel Con?guration: Stripe
Power Requirements: 12-15 VDC, 1 A
Power Consumption: 6.5 W
Battery Pack: Holds 8 AA or 10 NiCad, rechargeable batteries (batteries not included)
Battery Life: Approximately 2.5 hours
Input Signal Level: 1.0 Vp-p (positive) 75 ohms
Operating Temperature: 23° to 104°F (-5° to 40°C)
Storage Temperature: -13° to 108°F (-25° to 60°C)
Connectors:
Video In/Out: BNC, female
DC Input Power: 2.1 mm jack
General:
Unit Weight: 2.9 lb (1.3 kg)
Shipping Weight: 6 lb (2.7 kg)
Certifications/Ratings:
CE, Class B
FCC, Class B
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Includes PDA, Monitor, IPS-CABLE, IPS-MINIADPT Adapter Cable, and Carrying Case
- Plugs into the RJ-45 Port of the Spectra III SE/Spectra III Dome Drive or IPS-RDPE-2
- Plugs into Data Port of Spectra Mini Dome System When Used with IPS-MINIADPT Adapter Cable
- Spectra III SE/Spectra III/Spectra Mini System - PTZ Control, Full Programmability, and Software Upload Capabilities
- ExSite/Esprit System - PTZ Control and Full Programmability When Used with the IPS-RDPE-2
|
|
|
|
|
|
|
|
|
