 |
 |
 |
|
Pelco IS310DWV22 Wall,Ceiling, Rugged Bullet, High Resolution, Day Night
The IS310DWV22 Camclosure Integrated Camera System offers a large selection of camera and lens options. Available camera modules include:
Day/night wide dynamic range (WDR) and wide dynamic range: Pelco's WDR uses a pixel-based imager that adjusts for lighting by pixel. Traditional CCD cameras adjust the entire image for lighting conditions that appear in a small portion of the image or lighting conditions that are not extreme. Different lighting problems occur at night; car headlights and parking lot lights are good examples of problematic video images. Use Pelco's Day/Night WDR where you need the camera to adjust from extreme lighting to low light conditions.
Day/night high resolution (540 TVL) color camera with auto iris, varifocal lens: Application examples include environments that require monochrome images at night and color images during the day.
High resolution (540 TVL) color camera with auto iris, varifocal lens: Application examples include all general-purpose environments. Enclosure Module The IS310DWV22 Camclosure Integrated Camera System incorporates a camera and lens package into a small, unobtrusive enclosure. The system is quick and easy to install in a variety of indoor or outdoor applications. It is ideal for residential, office, mall, hospital, school, parking garage, correction and detention, and other medium-security installations subject to vandalism. The IS310DWV22 is designed with a microporous membrane vent that equalizes the internal and external pressure differential of the enclosure. The vent offers enhanced ingress protection by repelling water and dust, yet it allows for the free passage of vapors to prevent condensation within the enclosure.
Specifications:
Construction: Aluminum base and cover, steel camera mounting bracket
Finish: Light gray polyester powder coat
Unit Weight: 1.45 lb (0.66 kg)
Shipping Weight: 2.0 lb (0.90 kg)
Input Voltage: 12 VDC or 24 VAC (±10%), autosensing
Synchronization: Internal or AC line lock
Power Consumption Camera: <3 W (DW/CW models); <4 W (DN/CH models)
Power Consumption Heaters: 10 W when active; thermostatically controlled
Pan/Tilt/Adjustment Manual: 180° pan; 180° tilt
Signal System: NTSC or PAL
Video Output Composite: 1 Vp-p, 75 ohms
Video Output UTP: 1 Vp-p, 100 ohms
Video Connectors: 1 composite BNC and 1 UTP
Service Connector: 3-conductor, 2.5 mm connector for video output to optional IS-SC cable
Environment: Low temperature, indoor/outdoor
Operating Temperature: -50° to 122°F (-46° to 50°C); de-ices to -25°F (-4°C)
Thermostat Operation: Heater is thermostatically controlled to activate ON at 50°F (10°C) and OFF at80°F (27°C)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Fully-Integrated Enclosure with Camera and Lens
- 4 Camera Options:
- Day/Night Wide Dynamic Range (WDR): Pixel-Based Imager for Accurate Color Representation, Progressive Scan
- Day/Night High Resolution: 540 TVL
- Wide Dynamic Range (WDR): Pixel-Based Imager for Accurate Color Representation, Progressive Scan
- High Resolution Color: 540 TVL
- Varifocal Lens Options: 3.0~9.5 mm, 9.0~22.0 mm
- Includes Both Composite and Unshielded Twisted Pair (UTP) Outputs
- Rugged, High-Impact, Vandal-Resistant, Tamper-Resistant Hardware
- Service Connector for Video Output
- Thermostatically Controlled Heater
- Microporous Membrane Vent for Enhanced Ingress Protection
- Meets NEMA Type 4X and IP66 Standards
- Easy to Install
- Versatile, Aesthetically Pleasing Bullet Design, Mounts to Wall or Ceiling
- Concealed Cabling
|
|
|
|
|
|
|
|
|
