Home > Shop Brands > Pelco >

  Pelco PEL-IWM24GYSMR SMR1-49UZ1 27-Inch Wall Mount 24-VAC

Pelco PEL-IWM24GYSMR SMR1-49UZ1 27-Inch Wall Mount 24-VAC


 

Our Price : $304.20


Product Code: PEL-IWM24GYSMR

Qty:

Description
 
The IWM Series, IWM24 Series, and IDM4018 indoor/outdoor wall mounts are designed primarily for use with Pelco pendant domes including Spectra , DF5, DF8, and Sarix IE Series. They can also be used with other pendant domes that require 1.5-inch NPT pipe thread for installation. For Sarix IE Series domes, the IWM-SR and IWM24-SR wall mounts require the Sarix IE-P pendant mount adapter. All mounts feature a feedthrough opening in the mounting surface for easy routing of video and power cables and are threaded for 1.5-inch NPT pipe, making them ready to accept a variety of Pelco pendant back box models.

The IWM24 Series includes an integral 24 VAC, 100 VA transformer. Input power (120 or 240 VAC, 50/60 Hz) is selectable using an internal slide switch that is easily accessible through a front access cover plate. Input wiring can enter the arm from openings in the mounting plate or a ?exible metal conduit ?tting may be installed on the bottom of the mount. When installed with Sarix IE Series domes, the power from the IWM24-SR mount is used for the dome heater. The IWM Series, IWM24 Series, and IDM4018 mounts can be attached directly to any vertical load-bearing surface. All mounts are designed to support up to 75 pounds (34 kg). The IWM Series and IWM24 Series are constructed of cast aluminum and are available in black, gray, or light gray ?nish. The IDM4018 is constructed of aluminum and has a gray polyester powder coat ?nish. Optional parapet, pole, and corner adapters are available.

Specifications:

Electrical:
Input Power: 120/240 VAC, 50/60 Hz, switchable through an internal slide switch
Output Power: 24 VAC, 100 VA transformer
Fuse: One 1.6 A, 120 VAC, fast acting One 500 mA, 240 VAC, fast acting

General:
Suggested Mounting Method: IWM/IWM24 Series Secure with four 3/8-inch fasteners (not supplied) suitable for the mounting surface.
Dome Mounting Dome screws directly into mount
IWM24 Series: wo cable feedthrough holes in mounting plate; can accommodate 1/2-inch(1.27 cm)conduit ?ttings or PG13.5 liquid-tight gland ?ttings; one 3/4-inch (1.91 cm) conduit opening on the bottom of mount arm for ?exible metal conduit connectors.
Maximum Load: 75 lb (34 kg)
Effective Projected Area (EPA): IWM/IWM24 Series: ~48 square inches

Certifications/Ratings:
CE compliant (IWM24-BK, IWM24-GY, and IWM24-SR only)
UL/cUL Listed (IWM/IWM24 Series only)
Meets NEMA Type 4 Standards (IWM/IWM24 Series only)
Features
  • For Use with Spectra DF5, DF8, and Sarix IE Series Domes;Can Also Be Used with Other Pendant Domes Using 1.5-inch NPT Threaded Pipe for Mounting
  • Constructed of Aluminum (IDM4018) and Cast Aluminum (IWM Series)
  • Mounts Directly to Vertical Load-Bearing Surface for Wall Mount Applications
  • Supports up to 75 lb (34 kg)
  • Includes Cable Feedthrough Hole
  • IWM24 Series Includes Integral 24 VAC, 100 VA Transformer for Use with Spectra and Sarix IE Series Domes
  • Optional Parapet, Pole, and Corner Adapters are Available

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please