 |
 |
 |
|
The IX10 Series with Sarix technology is a 1.3 megapixel (MPx) network camera designed with industry-leading image quality and high performance processing power. Designed to install quickly, the camera comes equipped with the advanced features needed for demanding security applications. Sarix technology defines the next generation of video security imaging performance, delivering high definition (HD) resolution, advanced low light capabilities, consistent color science, and fast processing power. The H.264 compression video files are up to 20 times smaller making high definition video more affordable.
Camera:
The IX10 Series has two 1.3 megapixel models: color and day/night. Both models feature advanced low light technology capabilities. The day/night model has a mechanical IR cut filter for increased sensitivity in low light installations. The IX10 Series can support two simultaneous video streams. The two streams can be compressed in MJPEG and H.264 formats across several resolution configurations. The streams can be configured to a variety of frame rates, bit rates, and GOP (group of pictures) structures for additional bandwidth administration. The IX10 Series is simple to install, and the automatic back focus control feature makes sharp scene focus setup easy. A convenient video setup jack eliminates the need to use a laptop for viewing video when installing the camera. The Sarix IX10 Series features built-in Power over Ethernet (PoE) IEEE 802.3af, which supplies power to the camera over the network, eliminating the need for a separate power supply. If PoE is not available, 24 VAC can be used to power the camera.
Web Interface:
The IX10 Series uses a standard Web browser for powerful remote setup and administration. Up to 16 cameras can be viewed on the same network. Network protocols such as SSL configuration for security certificates, SSH for remote logon, and QoS for priority or guarantee data flow can be managed using a Web browser.
Specifications:
General:
Imaging Device: 1/3-inch (effective)
Imager Type: CMOS
Imager Readout: Progressive scan
Maximum Resolution: 1280 x 1024
Signal-to-Noise Ratio: 50 dB
Auto Iris Lens Type: DC drive
Electronic Shutter Range: 1 ~ 1/100,000 sec
Wide Dynamic Range: 60 dB
White Balance Range: 2,000° to 10,000°K
Sensitivity: f/1.2; 2,850°K; SNR >24 dB
Color (33 ms): 0.50 lux
Color SENS (500 ms): 0.12 lux
Mono (33 ms): 0.25 lux
Mono SENS (500 ms): 0.03 lux
Weight (without lens): 1.11 lb (0.50 kg)
Shipping Weight: 2.00 lb (0.90 kg)
Electrical:
Port: RJ-45 connector for 100Base-TX Auto MDI/MDI-X
Cabling Type: Cat5 or better for 100Base-TX
Power Input: 22 to 34 VAC; 24 VAC nominal or PoE (IEEE 802.3af class 3)
Power Consumption: <6 W
Current Consumption:
PoE: <200 mA maximum
24 VAC: <295 mA nominal; <390 mA maximum
Local Storage: Mini SD
Alarm Input: 10 VDC maximum, 5 mA maximum
Alarm Output: 0 to 15 VDC maximum, 75 mA maximum
Service Port: External 3-connector, 2.5 mm provides NTSC/PAL video output
Mechanial:
Lens Mount: CS mount, adjustable
Camera Mount: 0.25-inch (0.64 cm) UNC-20 screw, top and bottom of camera housing
Environmental:
Operational Temperature: 14° to 122°F (-10° to 50°C)
Storage Temperature: 14° to 158°F (-10° to 70°C)
Storage Humidity: 20% to 90%, noncondensing
Video:
Video Encoding: H.264 base profile and MJPEG
Video Streams: Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
Frame Rate: Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5, 4, 3, 2.5, 2, 1 (dependent upon coding, resolution, and stream configuration)
Additional Resolutions: 640 x 512, 640 x 352, 480 x 368, 480 x 272, 320 x 256, and 320 x 176
Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, mDNS (Bonjour), and 802.1x (EAP)
Users:
Unicast: Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams)
Multicast: Unlimited users H.264
Security Access: Password protected
Software Interface: Web browser view and setup, up to 16 cameras
Minimum System Requirements:
Processor: Intel Pentium 4 microprocessor, 1.6 GHz
Operating System: Microsoft Windows XP, Windows Vista , or Mac OS X 10.4 (or later)
Memory: 512 MB RAM
Network Interface Card: 100 megabits (or greater)
Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
Web Browser: Internet Explorer 7.0 (or later) or Mozilla Firefox 3.5 (or later); Internet Explorer 8.0 (or later) is recommended for configuring analytics
Media Player: QuickTime 7.6.5 for Windows XP, Windows Vista, or QuickTime 7.6.4 for Mac OS X 10.4
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Open IP Standards
- Up to 1.3 Megapixel Resolution (1280 x 1024)
- Up to 30 Images per Second (ips) at 1280 x 720
- Auto Back Focus
- H.264 and MJPEG Compression Capability
- Day/Night Models
- Video Setup Jack
- Sensitivity Down to 0.03 lux
- Power over Ethernet (IEEE 802.3af) or 24 VAC
- Up to 2 Simultaneous Video Streams
- Web Viewing, up to 16 Cameras Simultaneously
- Local Storage (Mini SD) for Alarm Capture
- Motion Detection
- Audio Accessory Available
- C10-UM universal camera mount
|
|
|
|
|
|
|
|
|
