 |
 |
 |
|
The Pelco IX30C12-EN IX30 Sarix Network ImagePak includes an IX30 3 MP color camera, 13M2.8-12 megapixel lens, and an outdoor pendant fixed mount dome with clear bubble.
With a 1/3" CMOS image sensor, the IX30 camera delivers clear images in H.264 and MJPEG formats at a resolution of 2048 x 1536. A minimum illumination of 0.12 lux and advanced low-light technology make the camera suitable for low-light surveillance.
With wide dynamic range (60dB), the camera corrects extreme lighting environments marked by high-contrast and harsh backlit scenes. Auto white balance adjusts the red and blue signals by taking a standard white color reference to get the most natural colors. An automatic back focus control feature makes sharp scene focus setup easy, while the video setup jack eliminates the need to use a laptop for viewing video during installation of the camera.
Power is supplied to the camera through PoE (IEEE 802.3af); hence, the camera gets power from the network itself without any extra wiring needed for auxiliary power outlets. The Sarix network camera comes with the standard Pelco camera sabotage behavior feature, which detects contrast changes in the field-of-view. Whenever the camera or lens is tampered with or obstructed by spray paint, cloth, or covered with a lens cap, an alarm is triggered.
A window blanking function blocks up to 4 areas (solid gray window) from being viewed by the operator. The IX30 Sarix Network Camera can be easily connected to Pelco IP and hybrid systems such as Endura version 2.0 or higher and Digital Sentry version 4.2 or higher. It also supports open architecture connectivity for third-party applications and an API (Application Programming Interface) for interfacing with Pelco's network cameras.
The DF8 Series Outdoor Pendant Dome with clear bubble can be easily mounted to any mount, flush to a ceiling, or to 1.5" NPT female pipe threads. It is made of aluminum and sports a light gray finish. The outdoor pendant also includes a sunshield that protects the dome from the direct rays of the sun and a heater kit, making it suitable for use in temperatures down to -60°F (-51°C). Integrated acrylic clear bubble designed for optimal relation with the lens causes zero light loss and facilitates clear videos even at long focal lengths.
IX30 3 MP Color Camera
1/3" CMOS image sensor
Delivers clear images at a resolution of 2048 x 1536
MJPEG and H.264 compression formats for high-quality images and efficient use of bandwidth
Allows up to 30 ips at 1280 x 720
Advanced low-light technology and minimum illumination of 0.12 lux generate clear images even in low-light conditions
Wide dynamic range-corrects extreme lighting environments marked by high-contrast and harsh backlit scenes
Auto white balance-adjusts the red and blue signals by taking a standard white color reference to get the most natural colors
Sarix technology-fast processing power and a consistent color science feature that offers the highest degree of sensitivity by multiplying and averaging the available light per pixel
Automatic back focus control makes sharp scene focus setup easy
PoE (IEEE 802.3af)-power is supplied to the camera through PoE; hence, the camera gets power from the network itself without the need for any extra wiring for auxiliary power outlets
Camera sabotage behavior-detects contrast changes in the field-of-view. Whenever the camera or lens is tampered with or obstructed with spray paint, cloth, or covered with a lens cap, an alarm is triggered
Web interface-supports standard web browser for powerful remote setup and administration; allows you to view up to 16 cameras on the same network
Window blanking-conceals up to 4 blocks (solid gray window) that the operator is restricting from viewing
Password protection-restricts access to unauthorized persons
Systemization-the camera can be easily connected to Pelco IP and hybrid systems such as Endura version 2.0 or higher and Digital Sentry version 4.2 or higher; supports an open architecture connectivity for third-party applications and an API (Application Programming Interface) for interfacing with Pelco's network cameras
Specifications:
Camera:
Sensor: 1/3" progressive scan CMOS
Maximum Resolution: 2048 x 1536
Signal to Noise Ratio: 50dB
Iris Auto: iris DC
Electronic Shutter: 1 ~ 1/10,000 sec
Wide Dynamic Range: 60dB
White Balance: 2,000 ~ 10,000°K
Sensitivity Sensitivity: f/1.2, 2800K, SNR >24dB
Color (33 ms): 0.50 lux
Color SENS (500 ms): 0.12 lux
Mono (33 ms): 0.25 lux
Mono SENS (500 ms): 0.03 lux
Network Interface: RJ-45 connector for 100Base-TX
Auto: MDI/MDI-X
Cable Type: Cat5 or better for 100Base-TX
Power Input: 22 to 34 VAC; 24 VAC nominal or PoE (IEEE802.3af class 3)
Power Consumption: <6 W
Current Consumption PoE: <200 mA maximum
24 VAC: <295 mA nominal; <390 mA maximum
Local Storage: Mini SD
Alarm Inputs: 10 VDC maximum, 5 mA maximum (x1)
Alarm Outputs: 0 ~ 15 VDC maximum, 75 mA maximum (x1)
Auxiliary Connectors: External 3-connector, 2.5 mm provides NTSC/PAL video output
Camera Mount: 0.25" (0.64cm) UNC-20 screw, top and bottom of camera housing
Video Compression: H.264 base profile and MJPEG
Video Streaming: Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
Frame Rate: Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7.5, 6, 5, 4, 3, 2, 1 (dependent upon coding, resolution, and stream configuration)
Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, mDNS (Bonjour), and 802.1x (EAP)
Simultaneous Client Access Unicast: Up to 20 simultaneous users
Multicast: Unlimited users H.264
Security: Password protected
Software Interface: Web browser view and setup, up to 16 cameras
System Integration Pelco System Integration: Endura 2.0 (or later)
Digital Sentry: 4.2 (or later)
Open IP Integration: Pelco IP camera API
Minimum Requirements:
- Processor: Pentium 4 microprocessor, 1.6 GHz
- OS: Windows XP, and Windows Vista, or Mac OS X 10.4 (or later)
- RAM: 512 MB
- Ethernet Card: 100 Megabits
- Web Browser: Microsoft Internet Explorer 7.0 (or later) or Mozilla Firefox 3.5 (or later)
Operating Temperature: 14 to 122°F (-10 to 50°C)
Storage Temperature: 14 to 158°F (-10 to 70°C)
Storage Humidity: 20 to 90%, noncondensing
Weight (without lens): 1.11 lb (0.50 kg)
Lens:
Mount Type: CS
Focal Length: 2.8-12 mm
Aperture: F/1.4-2.7
Focus Operation: Manual
Angle of View: Wide
Vertical: 74°
Horizontal: 100°
Diagonal: 127°
Tele:
Vertical: 17°
Horizontal: 23°
Diagonal: 29°
Minimum Object Distance (M.O.D.): 0.3m
Flange Focal Distance: 12.5 mm
Operating Temperature: 14 to 122°F (-10 to 50°C)
Dimensions (W x H x D): 1.9 x 2 x 2.6" (48.26 x 50.8 x 66.04 mm)
Outdoor Pendant:
Maximum Camera/Lens Size Horizontal (L x W x H):
7.25 x 2.75 x 2.6" (184 x 70 x 66 mm)
15° Angle (L x W x H): 7.75 x 3.0 x 3.0" (197 x 72.6 x 72.6 mm)
30° Angle (L x W x H): 8.75 x 3.0 x 3.0" (222 x 72.6 x 72.6 mm)
Construction: Aluminum back box; acrylic plastic bubble; aluminum trim ring
Weight: 8.5 lb (3.85 kg)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- IX30 3 MP Color Camera
- 13M2.8-12 Varifocal Lens
- Outdoor Pendant Dome with Clear Bubble
- Video Setup Jack
- Standard Sabotage Behavior
- Wide Dynamic Range (60dB)
- Window Blanking Function
- Resolving Power up to 100 Lines/mm
- Sustains Wind Velocity up to 90mph
|
|
|
|
|
|
|
|
|
