The Pelco IX30C8EL Sarix Network ImagePak (Color) includes an IX30 Color Camera, a 2.8-8 mm varifocal lens, and a DF8 Series in-ceiling back box with a clear bubble.
With a 1/3" CMOS image sensor (3.1MP), the IX30 camera delivers clear images in MJPEG and H.264 formats at a resolution up to 2048 x 1536. A minimum illumination of 0.03 lux and advanced low light technology makes the camera suitable for lowlight surveillance.
With wide dynamic range, the camera corrects extreme lighting environments marked by high-contrast and harsh backlit scenes. Auto white balance adjusts the red and blue signals by taking a standard white color reference to get the most natural colors.
The Sarix technology includes a consistent color science feature, which offers highest degree of sensitivity by multiplying and averaging the available light per pixel, useful for subject tracking. An automatic back focus control feature makes sharp scene focus setup easy, while the video setup jack eliminates the need to use a laptop for viewing video during installation of the camera.
Power is supplied to the camera through PoE (IEEE 802.3af); hence, the camera gets power from the network itself without any extra wiring needed for auxiliary power outlets. The Sarix network camera comes with the standard Pelco Camera Sabotage behavior feature, which detects contrast changes in the field-of-view. Whenever the camera or lens is tampered with or obstructed by spray paint, cloth, or covered with a lens cap, an alarm is triggered.
Supporting standard web browser, the Sarix camera enables powerful remote setup and administration and allows you to view up to 16 cameras on the same network. A window blanking function conceals up to 4 blocks (solid gray window) that the operator is restricted from viewing.
The IX30 Sarix Network Camera can be easily connected to Pelco IP and hybrid systems such as Endura version 2.0 or higher and Digital Sentry version 4.2 or higher. It also supports open architecture connectivity for third-party applications and an API (Application Programming Interface) for interfacing with Pelco's network cameras.
With a 2.8x zoom ratio and a focal length of 2.8-8 mm, the 13M2.8-8 varifocal lens is suitable for high precision image surveillance with megapixel and standard definition cameras. With a resolving power of up to 100 lines/mm, the lens offers optimal results when used in cameras with megapixel sensors. The lens can be adjusted to achieve the exact field-of-view and can be connected via the included standard 4-pin plug. Ideal for low-light conditions, the CS mount-type lens has a relative aperture size between f/1.2 and f/1.9, which allows it to perform across a wide range of lighting conditions. The aspherical elements reduce the level of distortion to produce sharpness at the image borders. It has a special coating that prevents light reflection.
The plenum-rated aluminum-constructed in-ceiling back box secures the camera. With the 5.2" (13.2cm) of overhead space above the ceiling, the camera can be securely fit in hard ceilings or standard 2 x 2' (61 x 61 cm) suspended ceilings. The clear bubble ensures high optical clarity and causes zero light loss.
Imaging Device: 1/3-inch (effective)
Imager Type: CMOS
Imager Readout: Progressive scan
Maximum Resolution: 2048 x 1536
Signal-to-Noise Ratio: 50 dB
Auto Iris Lens Type: DC drive
Electronic Shutter Range: 1 ~ 1/100,000 sec
Wide Dynamic Range: 60 dB
White Balance Range: 2,000° to 10,000°K
Sensitivity: f/1.2; 2,850°K; SNR >24 dB
Color (33 ms): 0.50 lux
Color SENS (500 ms): 0.12 lux
Mono (33 ms): 0.25 lux
Mono SENS (500 ms): 0.03 lux
Weight (without lens): 1.11 lb (0.50 kg)
Shipping Weight: 2.00 lb (0.90 kg)
Port: RJ-45 connector for 100Base-TX
Cabling Type: Cat5 or better for 100Base-TX
Power Input: 22 to 34 VAC; 24 VAC nominal or PoE (IEEE 802.3af class 3)
Power Consumption: <6 W
PoE: <200 mA maximum
24 VAC: <295 mA nominal; <390 mA maximum
Local Storage: Mini SD
Alarm Input: 10 VDC maximum, 5 mA maximum
Alarm Output: 0 to 15 VDC maximum, 75 mA maximum
External 3-connector, 2.5 mm provides
NTSC/PAL video output
Lens Mount: CS mount, adjustable
Camera Mount 0.25-inch (0.64 cm) UNC-20 screw, top and bottom of camera housing
Operational Temperature: 14° to 122°F (-10° to 50°C)
Storage Temperature: 14° to 158°F (-10° to 70°C)
Storage Humidity: 20% to 90%, noncondensing
Video Encoding: H.264 base profile and MJPEG
Video Streams: Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
Frame Rate Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5, 4, 3, 2.5, 2, 1 (dependent upon coding, resolution, and stream configuration)
Additional Resolutions: 640 x 512, 640 x 352, 480 x 368, 480 x 272, 320 x 256, and 320 x 176
Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, mDNS (Bonjour), and 802.1x (EAP)
CE, Class B
FCC, Class B