 |
 |
 |
|
The Pelco IX30DN12EK IX30 Sarix Network ImagePak includes an IX30 3 MP Day/Night camera, 13M2.8-12 megapixel lens, and an in-ceiling fixed mount dome with clear bubble.
With a 1/3" CMOS image sensor, the IX30 camera delivers clear images in H.264 and MJPEG formats at a resolution of 2048 x 1536. A minimum illumination of 0.03 lux and advanced low-light technology make the camera suitable for low-light surveillance. The camera uses a removable IR cut filter to switch between color and B&W as per the changes in ambient lighting.
With wide dynamic range (60dB), the camera corrects extreme lighting environments marked by high-contrast and harsh backlit scenes. Auto white balance adjusts the red and blue signals by taking a standard white color reference to get the most natural colors. An automatic back focus control feature makes sharp scene focus setup easy, while the video setup jack eliminates the need to use a laptop for viewing video during installation of the camera.
Power is supplied to the camera through PoE (IEEE 802.3af); hence, the camera gets power from the network itself without any extra wiring needed for auxiliary power outlets. The Sarix network camera comes with the standard Pelco camera sabotage behavior feature, which detects contrast changes in the field-of-view. Whenever the camera or lens is tampered with or obstructed by spray paint, cloth, or covered with a lens cap, an alarm is triggered.
A window blanking function blocks up to 4 areas (solid gray window) from being viewed by the operator. The IX30 Sarix Network Camera can be easily connected to Pelco IP and hybrid systems such as Endura version 2.0 or higher and Digital Sentry version 4.2 or higher. It also supports open architecture connectivity for third-party applications and an API (Application Programming Interface) for interfacing with Pelco's network cameras.
The DF8 Series in-ceiling fixed mount dome can be discreetly installed in suspended standard 2 x 2' (0.6 x 0.6 m) ceilings or hard ceiling applications. The internal versatile fixed bracket offering 360° of horizontal camera orientation makes for quick and easy positioning of the camera inside the dome. Integrated acrylic clear bubble designed for optimal relation with the lens causes zero light loss and facilitates clear videos even at long focal lengths.
Specifications:
Camera:
Sensor: 1/3" progressive scan CMOS
Maximum Resolution: 2048 x 1536
Signal to Noise Ratio: 50dB
Iris: Auto iris DC
Electronic Shutter: 1 ~ 1/10,000 sec
Wide Dynamic Range: 60dB
White Balance: 2,000 ~ 10,000°K
Sensitivity:
Sensitivity: f/1.2, 2800K, SNR >24dB
Color (33 ms): 0.50 lux
Color SENS (500 ms): 0.12 lux
Mono (33 ms): 0.25 lux
Mono SENS (500 ms): 0.03 lux
Network Interface:
-RJ-45 connector for 100Base-TX
-Auto MDI/MDI-X
Cable Type: Cat5 or better for 100Base-TX
Power Input: 22 to 34 VAC; 24 VAC nominal or PoE (IEEE802.3af class 3)
Power Consumption: <6W
Current Consumption:
PoE: <200 mA maximum
24 VAC: <295 mA nominal; <390 mA maximum
Local Storage: Mini SD
Alarm Inputs: 10 VDC maximum, 5 mA maximum
Alarm Outputs: 0 ~ 15 VDC maximum, 75 mA maximum
Auxiliary Connectors: External 3-connector, 2.5 mm provides NTSC/PAL video output
Camera Mount: 0.25" (0.64cm) UNC-20 screw, top and bottom of camera housing
Video Compression: H.264 base profile and MJPEG
Video Streaming: Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
Frame Rate: Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7.5, 6, 5, 4, 3, 2, 1 (dependent upon coding, resolution, and stream configuration)
Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, mDNS (Bonjour), and 802.1x (EAP)
Simultaneous Client Access Unicast:
Up to 20 simultaneous users
Multicast: Unlimited users H.264
Security: Password protected
Software: Software Interface: Web browser view and setup, up to 16 cameras
System Integration:
Pelco System Integration: Endura 2.0 (or later)
Digital Sentry: 4.2 (or later)
Open IP Integration: Pelco IP camera API
Minimum Requirements:
Processor: Pentium 4 microprocessor, 1.6 GHz
OS: Windows XP, and Windows Vista, or Mac OS X 10.4 (or later)
RAM: 512 MB
Ethernet Card: 100 Megabits
Web Browser: Microsoft Internet Explorer 7.0 (or later) or Mozilla Firefox 3.5 (or later)
Operating Temperature: 14 to 122°F (-10 to 50°C)
Storage Temperature: 14 to 158°F (-10 to 70°C)
Storage Humidity: 20 to 90%, noncondensing
Weight: (without lens) 1.11 lb (0.50 kg)
Lens:
Mount Type: CS
Focal Length: 2.8-12 mm
Aperture: F/1.4-2.7
Focus Operation: Manual
Angle of View:
Wide:
-Vertical: 74°
-Horizontal: 100°
-Diagonal: 127°
Tele:
-Vertical: 17°
-Horizontal: 23°
-Diagonal: 29°
Minimum Object Distance (M.O.D.): 0.3m
Flange Focal Distance: 12.5mm
Operating Temperature: 14 to 122°F (-10 to 50°C)
Dimensions (W x H x D): 1.9 x 2 x 2.6" (48.26 x 50.8 x 66.04 mm)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 1/3-Inch CMOS image sensor
- Delivers clear images at a resolution of 2048 x 1536
- MJPEG and H.264 compression formats for high-quality images and efficient use of bandwidth
- Allows up to 30 ips at 1280 x 720
- Advanced low-light technology and minimum illumination of 0.12 lux generate clear images even in low-light conditions
- Wide dynamic range: corrects extreme lighting environments marked by high-contrast and harsh backlit scenes
- Auto white balance: adjusts the red and blue signals by taking a standard white color reference to get the most natural colors
- Sarix technology: fast processing power and a consistent color science feature that offers the highest degree of sensitivity by multiplying and averaging the available light per pixel
- Automatic back focus control makes sharp scene focus setup easy
- PoE (IEEE 802.3af): power is supplied to the camera through PoE; hence, the camera gets power from the network itself without the need for any extra wiring for auxiliary power outlets
- Camera sabotage behavior: detects contrast changes in the field-of-view. Whenever the camera or lens is tampered with or obstructed with spray paint, cloth, or covered with a lens cap, an alarm is triggered
- Web interface: supports standard web browser for powerful remote setup and administration; allows you to view up to 16 cameras on the same network
- Window blanking: conceals up to 4 blocks (solid gray window) that the operator is restricting from viewing
- Password protection: restricts access to unauthorized persons
- Systemization: the camera can be easily connected to Pelco IP and hybrid systems such as Endura version 2.0 or higher and Digital Sentry version 4.2 or higher; supports an open architecture connectivity for third-party applications and an API (Application Programming Interface) for interfacing with Pelco's network cameras
|
|
|
|
|
|
|
|
|
