 |
 |
 |
|
The IXE10LW-OCP from Pelco is a sarix fixed camera 1.2 megapixel low light WDR day night Ov event counting plus. The Sarix IXE10LW Series IP camera features SureVision technology that seamlessly delivers advanced low-light performance, wide dynamic range (WDR), and anti-bloom technology for industry-leading image quality and performance. The 1.2 MPx network camera includes a mechanical IR cut filter for increased sensitivity in low-light installations. Anti-bloom technology adjusts the image to create the best picture when a bright light source is introduced in a dark scene, such as the glaring head lights of nighttime traffic.
The IXE10LW Series can support two simultaneous video streams. The two streams can be compressed in MJPEG and H.264 formats across several resolution con?gurations. The IXE10LW Series offers real time video (30 ips) with HD resolution using H.264 compression for optimized bandwidth and storage ef?ciency. The streams can be con?gured to a variety of frame rates, bit rates, and GOP (group of pictures) structures for additional bandwidth administration.
Pelco Analytics enhance the ?exibility and performance of the IXE10LW Series camera. Eight Pelco behaviors are preloaded on the network camera. Pelco behaviors can be con?gured and enabled using a standard Web browser, and they are compatible with Endura or a third-party system that supports Pelco's Analytics API system.
Camera models are also available with preloaded OV Analytic Suites. These behaviors can be con?gured and enabled using a standard Web browser and are compatible with an OV-ready compliant system with an OV Ready video management system.
Web Interface The IXE10LW Series uses a standard Web browser for powerful remote setup and administration.
Window blanking is used to conceal user-de?ned privacy areas that cannot be viewed by an operator. The IXE10LW Series supports up to four blanked windows. A blanked area will appear on the screen as a solid gray window.
The IXE10LW Series easily connects to Pelco IP and hybrid systems such as Endura version 2.0 (or later), Digital Sentry version 4.2 (or later), and Digital Sentry NVs. The camera also features open architecture connectivity to third-party software. Pelco offers an application programming interface (API) for interfacing with Pelco's network cameras
Specifications:
General:
Imaging Device: 1/3-inch
Imager Type: CMOS
Imager Readout: Progressive scan
Maximum Resolution: 1280 x 960
Signal-to-Noise Ratio: 50 dB
Auto Iris Lens Type: DC drive
Electronic Shutter Range: 1 ~ 1/77,000 sec
Wide Dynamic Range: 120 dB
White Balance Range: 2,000° to 10,000°K
Sensitivity: f/1.2; 2,850°K; SNR >20 dB
Color (33 ms): 0.10 lux
Color SENS (500 ms): 0.005 lux
Mono (33 ms): 0.05 lux
Mono SENS (500 ms): 0.0013 lux
Weight (without lens): 0.51 kg (1.14 lb)
Shipping Weight: 0.90 kg (2.00 lb)
Electrical:
Port:
RJ-45 connector for 100Base-TX
Auto MDI/MDI-X
Cabling Type: Cat5 or better for 100Base-TX
Power Input: 22 to 34 VAC; 24 VAC nominal or PoE (IEEE 802.3 af class 3)
Power Consumption: 6.3 W nominal
Current Consumption:
PoE: <200 mA maximum
24 VAC: <450 mA maximum
Local Storage: Micro SD
Alarm Input: 10 VDC maximum, 5 mA maximum
Alarm Output: 0 to 15 VDC maximum, 75 mA maximum
Service Port:
External 3-connector, 2.5 mm provides
NTSC/PAL video output
Mechanical:
Lens Mount: CS mount, adjustable
Camera Mount: 0.64 cm (0.25-inch) UNC-20 screw, top and bottom of camera housing
Enviromental:
Operating Temperature: 10° to 50°C (14° to 122°F)
Storage Temperature: 10° to 70°C (14° to 158°F)
Operating Humidity: 20% to 80%, noncondensing
Video:
Video Encoding: H.264 high, main, or base pro?le and MJPEG
Video Streams: Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
Frame Rate: Up to 30, 25, 24, 15, 12.5, 10, 8, 7.5, 6, 5, 4, 3, 2.5, 2, 1 (dependent upon coding, resolution, and stream con?guration)
Security Access: Password protected
Software Interface: Web browser view and setup
Pelco system Integration: Endura 2.0 (or later) Digital Sentry 4.2 (or later)
Open IP Integration Pelco IP camera API Minimum System Requirements:
Processor Intel: Core 2 Duo microprocessor, 2.6 GHz
Operating System: Microsoft Windows XP, Windows Vista, or Mac OS X 10.4 (or later)
Memory: 2 GB RAM
Network Interface Card: 100 megabits (or greater)
Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
CERTIFICATIONS Certifications
CE, Class B
FCC, Class B
UL/cUL Listed
KCC
C-Tick
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Up to 1.2 Megapixel (MPx) Resolution (1280 x 960)
- Up to 30 Images per Second (ips) at 1280 x 960
- Auto Back Focus
- H.264 and MJPEG Compression Capability
- Day/Night Models with Mechanical IR Cut Filter
- Wide Dynamic Range with Anti-Bloom Technology
- Power over Ethernet (IEEE 802.3af) or 24 VAC
- Up to 2 Simultaneous Video Streams
- Built-In Analytics
- Local Storage (Micro SD) for Alarm Capture
- Open IP Standards
- Motion Detection
|
|
|
|
|
|
|
|
|
