Home > Shop Brands > Pelco >

  Pelco PEL-IXE20DN-S Day-Night Sarix 2.1 Megapixel EP Networ

Pelco PEL-IXE20DN-S Day-Night Sarix 2.1 Megapixel EP Networ


 

Our Price : $856.90


Product Code: PEL-IXE20DN-S

Qty:

Description
 
Pelco IXE20DN Day/night, Sarix 2.1 Megapixel EP Network Camera Sabotage

The Sarix IXE20DN is a two 2.1 megapixel models: color and day/night. Both models feature advanced low-light technology capabilities. The day/night model has a mechanical IR cut filter for increased sensitivity in low-light installations. The Sarix IXE20DN can support two simultaneous video streams. The two streams can be compressed in MJPEG and H.264 formats across several resolution configurations. The extended platform gives real time video (30 ips) with HD resolution using H.264 compression for optimized bandwidth and storage efficiency.

The streams can be configured to a variety of frame rates, bit rates, and GOP (group of pictures) structures for additional bandwidth administration. Pelco Analytic Suites are easy to configure for alarm notification when used with Endura a third-party system that supports Pelco's Analytics API. OV Analytic Suites offers rule configurations and alarm notifications that are easy to enable when using OV Ready systems.

Specifications:

Model: IXE20DN
Imaging Device: 1/3-inch (effective)
Imager Type: CMOS
Imager Readout: Progressive scan
Maximum Resolution: 1920 x 1080
Signal-to-Noise Ratio: 50 dB
Auto Iris Lens Type: DC drive
Electronic Shutter Range: 1~1/10,000 sec
Wide Dynamic Range: 60 dB
White Balance Range: 2,000 to 10,000K
Sensitivity: f/1.2; 2,850K; SNR >24 dB Color (33 ms): 0.50 Lux; Color SENS (500 ms): 0.12 Lux Mono (33 ms): 0.25 Lux; Mono SENS (500 ms): 0.03 Lux
Weight (without lens): 1.14 lb (0.51 kg)
Shipping Weight: 2.00 lb (0.90 kg)
Port: RJ-45 connector for 100Base-TXAuto MDI/MDI-X Cabling Type Cat5 or better for 100Base-TX
Power Input: 24 VAC 10% or PoE (IEEE 802.3af class 3)
Power Consumption: <7 W
Current Consumption: PoE <200 mA maximum; 24 VAC <295 mA nominal; <390 mA maximum
Local Storage: Mini SD
Alarm Input: 10 VDC maximum, 5 mA maximum
Alarm Output: 0 to 15 VDC maximum, 75 mA maximum
Service Connector: External 3-connector, 2.5 mm provides NTSC/PAL video output
Lens Mount: CS mount, adjustable
Camera Mount: 0.25-inch (0.64 cm) UNC-20 screw, top and bottom of camera housing
Operational Temperature: 14 to 122F (-10 to 50C)
Storage Temperature: 14 to 158F (-10 to 70C)
Storage Humidity: 20% to 90%, noncondensing
Video Encoding: H.264 base profile and MJPEG
Video Streams: Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
Features
  • Open IP Standards
  • Up to 2.1 Megapixel Resolution (1920 x 1080)
  • Up to 30 Images per Second (ips) at 1280 x 720
  • Auto Back Focus
  • H.264 and MJPEG Compression Capability
  • Color and Day/Night Models
  • Video Setup Jack
  • Sensitivity Down to 0.03 Lux
  • Power over Ethernet (IEEE 802.3af) or 24 VAC
  • Up to 2 Simultaneous Video Streams
  • Built-in Analytics
  • Local Storage (Mini SD) for Alarm Capture

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please