Home > Shop Brands > Pelco >

  Pelco PEL-KBD200 Full-Functionality Desktop Keyboard Multi-Speed Control

Pelco PEL-KBD200 Full-Functionality Desktop Keyboard Multi-Speed Control


 

Our Price : $339.01


Product Code: PEL-KBD200

DISCONTINUED. Replacement part #KBD200A

Description
 
The KBD200 Keyboard is a full-function, desktop keyboard controller that can be used in a variety of applications. Left, right, up, and down keys provide precise pan and tilt control of fixed-speed and variable-speed receivers. Variable-speed equipment is controlled by programming the speed with the keyboard.

Additional keys select cameras and monitors; operate presets, patterns, auxiliaries, and sequences; open and close the iris; zoom and focus the lens; and start and stop auto, frame, and random scanning.

The keyboards can be used in three modes of operation: CM6700 Mode, ASCII Mode, and Direct Mode.

In the first mode, the keyboard is plugged into a CM6700 Matrix Switcher/Controller Unit and is used to program and operate the SCU. Up to eight KBD200 Keyboards can be connected to the SCU. The keyboards can control cameras connected directly to the SCU or connected to the SCU through an MX4000 Series Genex Multiplexer. Only one multiplexer can be connected to the SCU.

The ASCII Mode is the same as the CM6700 Mode except that the keyboard communicates with the CM6700 SCU over dial-up or fiber-optic communications lines and requires an RS-232 or RS-422 interface. Only one keyboard can be used with an SCU in the ASCII Mode. If additional keyboards are required, they can be connected directly to the SCU and used in the CM6700 Mode.

If you do not need all the features of the CM6700 SCU, but want the same keyboard functionality, then one KBD200 Keyboard can be wired directly to camera receivers in the Direct Mode (KBDKIT Required). Up to 16 receivers can be wired to a keyboard; however, a switcher such as an MS500 or VA6100, is required to route video to the monitor. Direct Mode uses two-wire control of receivers using Pelco's P protocol.

Specifications:

Electrical:

Input Voltage: 12 VAC or 12 VDC
Power Consumption: 1 watt
Keyboard Connector: RJ-45, 8-pin, modular (female)

Keyboard Communication, 6700 and ASCII Modes:
Interface: RS-485
Protocol: Pelco ASCII
Baud: 9600
Communication Parameters: 8 data bits, odd parity, 1 stop bit

Keyboard Communication, Direct Mode:
Interface: RS-422
Protocol: Pelco P
Baud: 4800
Communication Parameters: 8 data bits, no parity, 1 stop bit

General:

Keyboard Keypad: Mechanical
Display: Red LED, 7-segment, 2 cells
Multiplexer Mode Indicator: Green LED

Environmental:

Dimensions: 2.25" H x 8.125" W x 7.125" D (5.72 x 20.64 x 18.10 cm)
Unit Weight: 2.1 lb (0.95 kg)
Shipping Weight: 4 lb (1.81 kg)

Ambient Operating:
Temperature: 20 to 120F (-7 to 49C)
Humidity: 10-90% non-condensing

Certifications:
CE, Class A
UL listed to Standard 2044
cUL listed to CSA Standard 22.2 No. 1-94
FCC, Class A
Features
  • Keyboard to Control:
  • -CM6700 Switcher/Controller
  • -Genex Multiplexer When Used with CM6700
  • -Up to 16 Receivers Directly from Keyboard (such as Spectra and Esprit)
  • Multi-Speed Control of PTZ Functions
  • Preset Position and Pattern Control
  • Auxiliary Operation
  • Auto/Random/Frame Scanning
  • Programming of CM6700

Accessory or Possible Replacement
PELCO KBD200A

Our Price : $433.13


Add
PELCO KBD200A PUSH BUTTON PTZ KEYBOARD

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
Shop Brands
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please