 |
 |
 |
|
The MC3600H-2 digital monochrome camera is smaller than most other full-featured CCD cameras. In order to keep the camera as small as possible, Pelco engineers designed the camera components to fit within the external dimensions of the unit. Since the BNC, power and lens connectors stay within the boundaries of the case the compact camera and a lens fit perfectly inside one of Pelco's smaller enclosures (EH100, EH3508, EH2508, EH2020, EH2100 and EH2200).
Pelco also has a wide selection of fixed and varifocal lenses available for the MC3600H-2 to meet your installation requirements. The MC3600H-2 is a high-resolution digital camera (570 TV lines) with enhanced light sensitivity. The camera features a selectable gamma level setting, automatic gain control, line lock, and digital signal processing for automatic backlight compensation. To adjust one of these many fine-tuning picture modes, just reset the DIP switch setting on the side of the camera. The MC3600H-2 digital camera also includes a 1/3-inch imager, accepts DC and video drive auto iris lenses, and has adjustable back focus to accommodate C or CS lenses. Back focus adjustment is easy with the lockable thumb wheel, accessible from the top or bottom of the camera.
The MC3600H-2 digital camera is quick and easy to install and its distinctive design is ideal for use in confined spaces. The camera has a quick-connect power connection, BNC video connector, and a removable mount adapter for top or bottom mounting. Accessories include the PCM100, a Pelco camera mount designed specifically for the MC3600H-2. This adjustable, well-designed mount has no exposed cabling or hardware. All cables are integrated in the unit making installation quick and easy. The PCM100 can be installed directly to a wall, ceiling or adapted to a standard 2 x 4-inch (5.08 cm x 10.16 cm) electrical box.
Specifications:
Model:
MC3600H-2: 1/3-inch high resolution digital
monochrome CCD camera,
570 TVL, EIA format
General:
Imaging Device: 1/3-inch interline transfer CCD
Picture Elements: 768 (H) x 494 (V)
Sensing Area: 6mm diagonal
Scanning System: 525 lines, 2:1 interlace
Synchronize System: AC Line lock
Horizontal Resolution: 570 TV lines
Iris Control: Electronic/passive
Minimum Illumination: 0.021 @ 30 IRE, f1.2
Signal-to-Noise Ratio: 52 dB (AGC Off)
Gain Control: Automatic
Vertical Phase: Adjustable 0° ±120°
Automatic Gain Control: Selectable by DIP switch setting
Backlight Compensation: Selectable by DIP switch setting
Signal Processing: DSP
Auto Iris Lens: Type DC/video control
Video Output: 1 Vp-p, 75 ohms
Iris Control Range: 1/60-1/100,000 second
Electrical:
Power Requirements: 14-30 VAC or 11-40 VDC
Power Consumption: Less than 4 watts
Power Connector: 2-pin terminal strip, push-in type
Video Connector: BNC
Lens Jack: 4-pin connector (miniature square)
Mechanical:
Lens Mount: C/CS mount (adjustable)
Camera Mount: 1/4-inch UNC-20 screw, top and bottom of camera housing
Environmental:
Operating Temperature: 14° to 122°F (-10° to +50°C)
Storage Temperature: 14° to 158°F (-10° to +70° C)
Physical:
Weight (without lens): 0.77 lb (0.35 kg)
Shipping Weight: 2 lb (.9 kg) approximate
Certifications:
CE, Class B
UL, cUL listed
FCC, Class B
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Sony EXview HAD Technology
- Compact Body Style, Shorter Length Than Most Full Featured CCD Cameras
- 1/3-Inch Format CCD Imager
- C/CS Lens Mount
- DC/Video Drive Auto Iris Lens Compatibility
- 24V AC/DC Power
- Line Lock With Phase Adjust
- Automatic Gain Control (AGC)
- Selectable Gamma
- Backlight Compensation
- Electronic Iris
- High Horizontal Resolution of 570 TV Lines
- Digital Signal Processing
- Removable Low Profile Top/Bottom Mount
- Optional Integral Feedthrough Mount
|
|
|
|
|
|
|
|
|
