 |
 |
 |
|
The Pelco MX4016CD can be used to send the video signal from up to 16 CCTV cameras to a single VCR. While recording or playback is taking place you can choose to view cameras in full screen, in a picture-in-picture format, in quad mode, or all 16 cameras at once on the same screen. At the same time you can apply a digital zoom to any camera in order to get a close-up view of important details. And thanks to its powerful re-sizing engine based on patented Active Image technology this unit is able to maintain a high degree of quality for magnified and multi-camera images with minimal aliasing.
You can also set the multiplexer to automatically switch between cameras at timed intervals in both full screen and multi-camera modes. The multiplexer can also be programmed to prioritize the display and recording of certain cameras in response to an alarm condition. Alarm conditions can be activated by the multiplexer's own built-in activity detector, or through an alarm input available for each camera channel.
Full duplex operation
"Covert" feature allows selected cameras to be recorded, but not displayed during live viewing or playback. Viewing or playback of "covert" cameras can be password protected
Simultaneous viewing of up to 16 cameras while recording or playing tapes
Advanced digital video processing, including advanced image re-sizing and digital filtering. Provides high quality multi-camera and zoom displays
Looping inputs
Multi-Camera Display Modes - PIP, quad, nine and sixteen (16-CH model only) camera displays
Advanced Activity Detection - Programmable detection mask and sensitivity levels for each camera
Four VCR Compatibility Modes - Standard, auto tracking, VCR matching, and custom
Playback of other manufacturers' tapes 1
Menu programming for quick, easy setup
Mutli-language Support; English (default), French, Spanish, or German
Three Independent Monitor Outputs:
Main Output - Full-screen call-up, multi-camera displays, VCR playback and sequencing
Spot Monitor Output - Full-screen sequencing, activity, and alarms
Auxiliary Monitor Output - Full-screen sequencing, activity, and alarms
Alarm Handling - Priority or exclusive alarm recording and display
Compatible with S-VHS VCRs and monitors (main output)
Remote control via RS-485 communications port
Pan/Tilt and lens control via Coaxitron
Specifications:
Signal System: NTSC
Channels: 16
Resolution: 768 x 512
Recording Rate: 30 FPS
Display Modes: Full, quad, 16 or 16 (16-CH model only)
Switching Method: Manual or auto (auto switching available in full screen and multi-camera modes)
Video Inputs:
From Cameras: BNC x16
From VCR: BNC x1, S-Video x1
Video Outputs:
Looping: BNC x16
To Monitor: BNC x3 (to Main/Spot/AUX), S-Video x1 (to Main)
To VCR: BNC x1, S-Video x1
Audio Inputs: No
Audio Outputs: No
Alarm I/O: 16 Alarm inputs, 1 alarm output
Motion Detection: Programmable detection mask and sensitivity levels for each camera
Control Ports: RS-485, Coaxitron for PTZ
Power Requirements: 120VAC
Power Consumption: <25W
Operating Temperature: 32 - 122°F (0 - 50°C)
Dimensions (WxHxD):
Desktop: 17.2 x 1.8 x 12.2" (437 x 45 x 310mm)
Rack Mount: 19 x 1.8 x 12.2" (483 x 45 x 310mm)
Weight: 10 lbs (4.5kg)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Simultaneous Record/View
- Manual/Sequential Switching
- Digital Zoom
- Anti Aliasing Technology
- Covert Camera Function
- Advanced Activity Detector
- Looping Inputs
- Coaxitron/RS-485 PTZ Control
- Alarm I/O
|
|
|
|
|
|
|
|
|
