 |
 |
 |
|
The PelcoNet NET104A Transmission System transmits live video, data, and audio across existing Ethernet networks. Sending video and audio over computer networks yields significant cost savings by using an existing computer network to monitor a remote site. PelcoNet NET104A saves installation costs (no separate cabling required), allows toll-free operation (intranets), and saves management costs (single, uniform network).
PelcoNet NET104A has four channels, so it works with up to four video sources. It can multiplex to provide a single view, sequence of views, or a quad view.
With minimal setup, the PelcoNet NET104A Transmission System can be installed and running in minutes. Connect cameras to the transmitter and a monitor to a standard PelcoNet NET101 Series receiver. Then connect the transmitter and receiver to the network and configure IP addresses for the equipment using a standard terminal program or any Internet browser.
If you need to control a camera (operate pan, tilt, and lens functions, or do presets and patterns), an RS-232 data interface links the keyboard controls to the network and then from the network to the camera system.
Instead of a PelcoNet NET101Series receiver and monitor, an Internet browser can be used at the receiving end to display video on a PC. On-screen keyboards in PelcoNet NET104A let you control the following devices over the network: System 9760 /9740 or CM6700/CM6800 matrix controller, Genex multiplexer, Spectra domes, and Esprit positioning systems. You can also record live video on the viewing computer's hard drive and play it back.
Specifications:
Network Protocol and Standards Compatibility:
Internet Configuration: IP, TCP, UDP, ICMP, ARP,HTTP, FTP, IGMP
Video Coding: H.261,H.263, H.323 (M-JPEG in Server Push mode only), G.711
Video Frame Rate: Up to 30 images/second
Interfaces:
Video Input (transmitter): 4 BNC, PAL/NTSC, 75 ohms, 1 Vp-p, RS-170, CCIR-601
Video Output (receiver): 1 BNC, PAL/NTSC, 75 ohms, 1 Vp-p
Audio Input (optional): RCA phono jack, -32 dBm0 variable
Audio Output (optional): RCA phono jack, -10 to 0 dBm0, 600 ohms
Handset Interface (optional): RJ-11
LAN Interface: UTP (10BASE-T), RJ-45
LAN Data Rate: 10 Kbps up to 1 Mbps
Data Interface: 1 RS-232C/RS-422/RS-485, bi-directional (Sub-D9 pin
Alarm Inputs: 4 terminals for direct connection of controls, 1 master alarm input
Alarm Output: 4 relays, maximum 40V, 0.8A
Video:
Video Standards: PAL, NTSC
Video Resolution: 704 x 576 pixels (HiRes) 352 x 288 pixels (CIF)
Power Adapter:
Type: Plug power adapter
Input Voltage: 100-240 VAC, 50/60 Hz
Output Voltage: 5 VDC, 2A
Country Specific Adapters: US (default), Australia, Europe, and UK. (Specify when ordering.)
Enviromental:
Operating Temperature: 41° to 104°F (5° to 40° C)
Operating Humidity: 80% maximum relative humidity, non-condensing
General:
Dimensions: 1.4" H x 10.2" W x 6.5" D (3.5 x 26.0 x 16.5 cm)
Unit Weight: 2.8 lb (1.3 kg), without power supply
Shipping Weight: 5 lb (2.27 kg), with power supply
Certifications:
Electromagnetic Emissions And Safety: Meets requirements of EN 55022, EN 50082-1, and EN 60950
CE, Class A
UL listed
UL Listed to Canadian safety standards
FCC, Class B
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Send and Receive Live Video, Audio, and Data Over
- Ethernet Networks
- Four Video Channels to Display/Transmit Single or Quad Views; Also Sequences Images
- Four Alarm Inputs for External Detectors
- Relay Output for Switching External Devices (such as a door lock, etc.)
- View the Picture on a PC or CCTV Monitor
- Control a PTZ, Genex Multiplexer, or Matrix Within a Building or Across the Country
- Autonomous System Does Not Require a PC to Transmit
- Uses TCP/IP Protocol
- Multicast Function Allows Simultaneous Connection of Multiple Receivers, Including up to Five Viewers of Live Video
- Up to 30 High Quality Images Per Second
- Manually Record and Play Back Camera on a PC's Hard Drive
- Select Specific Areas in the Display for Motion Detection
|
|
|
|
|
|
|
|
|
