 |
 |
 |
|
The Pelco NET300R MPEG-4 IP Video Receiver performs the function of receiving live video and control data over Ethernet networks. This unit works in conjunction with the NET300T video transmitter to enable two-way video transmission. This unit can be used as a standalone receiver for a camera in the absence of a BNC cable.
While the transmitter encodes video and control data to be transmitted over an IP network, the NET300R MPEG-4 IP video receiver decodes the data that is received from the network. It is connected to an analog monitor for previewing the video data. The video can also be viewed on a PC in an Internet browser such as Internet Explorer.
Receiving video data over a computer network through the NET300R MPEG-4 IP video receiver results in cost savings, as existing networks can be used to monitor even a remote location without extra cabling. Since the Intranet is utilized, there is no cost incurred in data transmission; usage of a single network also lowers management/maintenance costs.
The operating temperature of the video receiver is 32 to 122°F (0 to 50°C).
The MPEG-4 IP video receiver is certified by the Federal Communications Commission (FCC) and CE as a Class B device. The Radio Frequency (RF) emissions from the device fall within the safe zone and do not interfere with the working of other electronic devices such as televisions.
Ability to receive live video and control data over Ethernet networks
Dual MPEG-4 Video Streams
Full integration with Pelco's Matrixes, Genex Multiplexers, Spectra Domes, and Esprit Positioning Systems
Adjustable bandwidth, image rate, and quality
View video on PC, analog monitor, or both
NTSC and PAL
Alarm input and relay output
Bidirectional data channel via RS-232/422/485 serial port.
Specifications:
Signal System: NTSC/PAL
Compression: MPEG-4 (M-JPEG in Server Push mode only)
Frame Rate: 30 FPS
Resolution:
PAL:
704 x 576 pixels (4CIF)
704 x 288 pixels (2CIF)
352 x 288 pixels (CIF)
NTSC:
704 x 480 pixels (4SIF)
704 x 240 pixels (2SIF)
352 x 240 pixels (SIF)
Video Input: BNC x1
Network Interface: Ethernet 10/100BaseT autosensing, RJ-45
Data Rate: 9.6 Kbps to 1.5 Mbps
Supported Protocols: RTP, RTCP, UDP, TCP, IP, HTTP, SNMP, IGMP, ICMP, ARP
Communication: 1 RS-232/RS-422/RS-485, bidirectional (9-pin, D-sub)
Alarm I/O: 2 Alarm inputs, 1 alarm output
Minimum Requirements:
PC (Pentium 4 microprocessor, 1.6 GHz) with Windows 98/2000/XP or higher operating system
256 MB of RAM
Gateway to the network
100 Mbit Ethernet card
Sound card if using audio application
Microsoft:
Internet Explorer 6.0 (or higher), or free serial interface and terminal program, or PelcoNet NET300R (receiver) and video monitor
DirectX 8.1 or 9.0 application programming interface
Microsoft Virtual Machine:
Screen resolution of 1024 x 768 or higher, 16- or 32-bit pixel color resolution Graphic Card: ATI RADEON 7500 or 8500, Matrox G 550 or Parhelia , or NVIDIA GeForce 3 or 4 with MPEG-4 playback capability
Power Requirements: 12-24VDC
Power Consumption: 10W
Operating Temperature: 32 - 122°F (0 - 50°C)
Dimensions (WxHxD): 3.4 x 1.2 x 4.5" (8.6 x 3.1 x 11.4cm)
Weight: 0.4 lbs (0.2kg)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Send and Receive Live Video, Audio, and Control Data Over Ethernet Networks
- Dual MPEG-4 Video Streams
- CompactFlash Interface for Local Recording
- Full Integration with Pelco's Matrices, Genex Multiplexers, Spectra Domes, and Esprit Positioning Systems
- Adjustable Bandwidth, Image Rate, and Quality
- View Video on PC, Analog Monitor, or Both
- NTSC and PAL
- Alarm Input and Relay Output
- Two Bidirectional Data Channels Via RS-232 and RS-232/422/485 Serial Ports
|
|
|
|
|
|
|
|
|
