 |
 |
 |
|
The NSM5200 Series delivers industry leading performance and innovation for mission-critical storage needs. The combination of high performance, scalable hardware design and advanced software capabilities enables the NSM5200 to meet the unique storage needs of physical security and surveillance applications.
Hardware Built for Performance, Reliability, and Scalability:
The demands of surveillance applications place unique strains on storage subsystems. Storage systems require the bandwidth and capacity to keep up with incoming streams. They must also simultaneously manage all other common disk and RAID functions. In addition, physical security applications are almost always mission critical. Any downtime, degraded performance for routine maintenance, or loss of recorded footage is extremely disruptive to the organization's physical security mission.
The NSM5200 has been engineered to meet these unique performance and reliability demands. Custom hardware components, to eliminate common performance choke points to a patented scheme for writing content to a disk drive, have been speci?cally designed to deliver sustained high throughput for recording and playback. The NSM5200 is capable of a maximum of 250 Mbps of throughput for incoming streams while delivering 32 simultaneous playback streams per storage pool. This performance is maintained whether the system is operating under normal conditions, dealing with disk drive errors, or rebuilding the RAID array.
The NSM5200 improves the total cost of ownership and energy ef?ciency by consolidating disparate components into a single chassis. The 250 Mbps throughput provides double the improvement over Pelco's ?rst generation integrated recorder, allowing users to service far more data streams in one storage unit than previously possible. In addition, with the integration of the management server functionality into the storage chassis, cost and energy ef?ciency is optimized by eliminating the cost of additional servers and the associated heating, ventilation, and cooling costs. Finally, the use of lower power components and adaptive cooling inside the chassis manage power dissipation based on load requirements.
Reliability is enhanced through the use of redundancy at all common failure points. A CompactFlash card is used to host the operating system for higher reliability than traditional hard disk drives. To mitigate any downtime resulting from CompactFlash errors, the database is striped across the storage array. The RAID 6 storage con?guration provides double parity protection of recorded data. The hard drive bay is cooled through the use of high capacity, redundant fans to ensure that the drives are kept at an optimum operating temperature. Finally, fully redundant power supplies guard against any power supply failure.
Specifications:
Front Panel Indicators:
Power: Blue Pelco badge
Software Status: Green, amber, red (based on diagnostics)
Ethernet Port 1: Green, amber, red
Ethernet Port 2: Reserved
Hardware Status: Green, amber, red
Hard Drive Status: Green, red
Power:
Power Input: 100 to 240 VAC, 50/60 Hz, autoranging
Power Supply: Internal, dual-redundant, hot swappable
Power Consumption: 100 VAC
Operating Average: 262 W, 2.65 A, 895 BTU/H
Power Consumption: 115 VAC
Operating Average: 263 W, 2.31 A, 895 BTU/H
Power Consumption: 220 VAC
Operating Average: 254 W, 1.25 A, 868 BTU/H
Environmental:
Operating Temperature: 50° to 95°F (10° to 35°C) at unit air intake
Storage Temperature: -40° to 149°F (-40°to 65°C)
Operating Humidity: 20% to 80%, noncondensing
Max Humidity Gradient: 10% per hour
Operating Altitude: -50 to 10,000 ft (-16 m to 3,048 m)
Operating Vibration: 0.25 G at 3 Hz to 200 Hz at a sweep rate of 0.5 octave/minute
Physical:
Construction: Steel cabinet
Finish:
Front Panel: Gray metallic with black end caps
Chassis: Black matte ?nish
Dimensions (without rails): 24.3" D x 17.0" W x 5.2" H (61.8 x 43.2 x 13.2 cm)
Unit Weight:
Empty (without drives): 46.4 lb (21 kg)
Loaded (with drives): 66.8 lb (30 kg)
Shipping Weight: 77.0 lb (35 kg)
Mounting Options: Rack, 3 RU per unit (rack rails and hardware are supplied)
Certifications/Ratings:
CE, Class A; meets EN50130-4 standard requirements
FCC, Class A
UL/cUL Listed
C-Tick
S-Mark for Argentina
CCC
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Recording Throughput up to 250 Mbps Meets Demanding Performance Requirements for Write-Intensive Applications
- Hardware Designed to Eliminate Single Points of Failure, Including Redundant Fans, Power Supplies, and RAID 6 Storage for Optimum Reliability
- Pooled Storage Management Provides Automatic Distributed Load Balancing and Active-Active Failover Across a Storage Pool to Ensure Continued Recording If Catastrophic Failure Occurs
- Built-in EnduraStor Storage Management Increases Storage Ef?ciency by Grooming Recorded Streams Based on Age and Priority
- Ability to Serve 32 Simultaneous Playback Streams Per Storage Pool
- Performance Levels Maintained in Normal and RAID Error Conditions
- Built-in Diagnostic Monitoring Provides Preventative Maintenance and SNMP Monitoring
- Reduced Cost of Ownership and Increased Energy Ef?ciency Through Consolidation of Multiple Hardware Components into a Fully Integrated Chassis
|
|
|
|
|
|
|
|
|
