 |
 |
 |
|
The Pelco Full High-Definition LCD Monitor (52") with IQE (Image Quality Enhancement) technology produces detailed imagery at a high resolution of 1920 x 1080p, a high contrast ratio of 4000:1, and 500 cd/m² of luminance.
The full high-definition monitor features edge enhancement dynamic contrast and ISM (Image Sticking Minimization) that prevents permanent damage of images. A quick response time of 8ms ensures minimal ghosting of images. PIP (Picture-in-Picture) technology allows viewing of 2 programs simultaneously.
You can configure individual monitors to meet the security needs. Multiple video streams can be configured to reduce power requirements for installation. In addition, the unit uses low-power components to meet regulatory compliance.
The 52" LCD monitor offers looping BNC output, and accepts 2 looping composite (BNC), S-video looping, component, RGB, and DVI interface. The improved thermal management is used to dissipate heat.
Compatible with Pelco and third-party mega pixel cameras, the Full High-Definition LCD Monitor adapts to the varying nature of security and is ideal for use in modern control rooms. The monitor can seamlessly scale down to 720p when used with lower resolution camera systems.
52" (1321mm) LCD monitor with IQE (Image Quality Enhancement) technology
Full high-definition resolution -1920 x 1080p
High contrast ratio -4000:1
Brightness -500 cd/m²
Viewing angle (H/V) -178°/178°
Features edge enhancement dynamic contrast and image sticking minimization
Quick response time of 8ms ensures minimal ghosting of images
PIP technology -allows viewing of 2 channels simultaneously
Individual monitors can be configured to meet security needs
Uses low-power components to meet regulatory compliance
Looping BNC output
Video inputs -2 looping composite (BNC), S-video looping, component, RGB, and DVI
Improved thermal management -used to dissipate heat and ensures reliability
Compatible with Pelco and third-party mega pixel cameras
Ideal for use in modern control rooms
Can seamlessly scale down to 720p when used with lower resolution camera systems
Embedded installation handles
Specifications:
Type: 52" monitor (1321mm)
Viewing Area: 1152 x 648mm
Number of Pixels: 1920 (H) x 1080 (V)
Pixel Pitch: 0.600 x 0.600mm
Brightness: 500 cd/m2 (typical)
Contrast: Ratio 4000:1
Backlight: CCFL
Refresh Rate: 60 Hz
Viewing Angle 178°/178° (H/V)
Response Time: 8 ms
Native Resolution: 1920 x 1080 at 60 Hz
Optimum Resolution:
(RGB mode)
VGA: 720 x 400 at 70 Hz, 640 x 480 at 50/60/72/75 Hz
SVGA: 800 x 600 at 50/60/72/75 Hz
XGA: 1024 x 768 at 50/60/75 Hz
SXGA: 1280 x 1024 at 60 Hz
WXGA: 1360 x 768/1366 x 768 at 60 Hz
UXGA: 1600 x 1200 at 60 Hz
SDTV (480p/576p): 720 x 480 at 60 Hz, 720 x 576 at 50 Hz
HDTV (720p/1080i/1080p): 1280 x 720 at 50/60 Hz, 1920 x 1080 at 50/60 Hz, 1920 x 1080i at 50/60 Hz
Aspect Ratio: 16:9
Video Formats: 480p, 576p, 720p, 1080i, 1080p
Panel Life: 50,000 plus hours
Display Colors: 16.7 million
Picture in Picture (PIP): Selectable, sizeable, swappable, moveable
Speakers: 2, internal (5W, 4 ohms x 2)
Front Panel Controls: Menu, source, down/up, vol -/+, power
LED: LED, power on/off
Video Input:
BNC x2 looping
S-Video x1 looping
RGB x1
DVI x1
Component x1
Audio Input: 2, audio, RCA jack
Sync:
Horizontal Frequency: 31 to 69 kHz
Vertical Frequency: 56 to 85 Hz
Signal System: NTSC/PAL
Power Requirements: 100 to 240 VAC, 50/60 Hz
Power Consumption: 380W
Environment:
Operating Temperature: 32 -113°F (0 -45°C)
Storage Temperature: -4 -140°F (-20 -60°C)
Operating Humidity: 20 to 80%, noncondensing
Storage Humidity: 10 to 90%, noncondensing
Dimension (DxWxH):
(without stand)
4.5 x 48.5 x 29.8" (11.4 x 123.3 x 75.7cm)
Weight: 90.4 lbs (41kg)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- High Definition -1920 x 1080p
- Image Quality Enhancement Technology
- Edge Enhancement Dynamic Contrast
- ISM (Image Sticking Minimization)
- High Contrast Ratio -4000:1
- Quick Response Time -8ms
- Looping BNC Output
- RGB and DVI Interface
- Improved Thermal Management
- Picture-in-Picture (PIP)
|
|
|
|
|
|
|
|
|
