The Pelco PS20 ScannerPak with High Resolution Camera (3-8 mm Lens, Mount) consists of a PS20 scanner, an EH3512-2HD enclosure, a CC3701H-2 camera, a 13VA3-8 adjustable varifocal lens, and a SS3512 sun shroud.
Suitable for both indoor/outdoor applications, the PS20 medium-duty scanner is designed to operate with a maximum load of up to 35 lbs (15.75 kg). The completely sealed scanner is made of aluminum with a gray polyester finish and is ideal for surveillance installations at gas stations, retail outlets, parking lots, etc. The easy-to-install scanner can be mounted on a flat surface in an upright or inverted position and is compatible with Pelco's scanner and pan/tilt hard wire controllers.
Along with stepper motor technology for increased reliability, the scanner features 3 speed settings (3, 6, and 12°/sec) and micro-processor-controlled magnetic limit stops for smooth operation. The medium-duty scanner pan-rotates past 360° and eliminates blind spots in the surveillance area. Offering a complete panoramic view, the scanner can be a replacement for several fixed cameras and features a tilt table that can be manually adjusted from 0° horizontal to 65° tilt position.
When connected to Pelco MPTAZ series controls, the thermal-protected scanner is capable of operating continuously, randomly, and manually; it can also perform auto and random scan operation without the controller.
The EH3512-2HD is an indoor/outdoor 24VAC enclosure with a built-in heater and defroster. The thermostatically controlled heater activates at 50°F (10°C) and switches off at 80°F (27°C), while the defroster operates continuously. With die-cast and extruded aluminum construction and a gray polyester powder coat, the corrosion-resistant enclosure can withstand operating temperatures ranging from -10 to 120° F (-23 to 49° C). The removable camera sled inside the enclosure can be easily accessed via the front hinged lid and the link-lock latch at the rear can be padlocked for security. The camera sled has multiple holes and can be inverted for additional camera elevation. Two adjustable (PG13.5) glands on the bottom make installation of power and video cables easy. The enclosure is CE-compliant, UL/cUL-listed and meets NEMA Type 4 and IP66 standards.
The CC3701H-2 Digital CCD Color Camera has a 1/3" CCD imager and offers a resolution of 480TVL. With a minimum illumination requirement of 0.5 lux, the camera is suited for low-level night time surveillance, and the extended dynamic range (12x) ensures clear imagery in extreme light conditions. The camera accepts DC and video drive auto iris lenses, and has adjustable back focus to support all C/CS mount lenses. The lockable thumb wheel is accessible from the top or bottom of the camera and makes for easy back focus adjustment.
The camera features 2 color balance settings, digital signal processing, and line lock. DIP switches on the left side of the camera allow you to adjust the fine tuning of the corresponding features.
Automatic gain control adjusts the signal strength to maintain a constant brightness level. Automatic backlight compensation adjusts video gain to correct the exposure when the object being captured is in front of a bright light source.
A removable mount adaptor facilitates top or bottom mounting of the camera. BNC, power, and lens connectors are contained within the case, making the camera and lens perfectly fit inside the EH3512-2HD enclosure.
Connecting via the included 4-pin plug, the 13VA3-8 varifocal lens is a CS mount lens that features a direct-drive and has 2.7x optical zoom (manual). The adjustable lens has a focal length of 3-8 mm. A relative aperture size between f/1.0 and closed allows the lens to perform across a wide range of lighting conditions
PS20 Medium-duty Scanner:
Medium-duty indoor/outdoor scannerSupports maximum load of 35 lbsRuggedly constructed and completely sealed, made of aluminum with a gray polyester finishSuitable for a wide range of surveillance installations such as at gas stations, retail outlets, parking lots, etcMounts on a flat surface in an upright or inverted positionCompatible with Pelco's scanner and pan/tilt hard wire controllersStepper motor technology for increased reliability3 speed settings -3, 6, and 12°/secMagnetic limit stops microprocessor controlled for smooth operationScans past 360°-Eliminates blind spots and offers a complete panoramic viewManually adjustable tilt table for viewing from 0° horizontal to 65° tilt positionCapable to operate continuously, randomly, and manually when used with Pelco MPTAZ Series controlsCapable of auto and random scan operation without the need for a controllerThermal protectedMeets NEMA Type 4 Standards
EH3512-2HD Indoor/Outdoor Enclosure (24VAC):
Includes built-in heater and defroster
Thermostatically controlled heater activates at 50°F (10°C) and switches off at 80°F (27°C)
Defroster operates continuously
Die-cast and extruded aluminum construction with a gray polyester powder coat finish
Front hinged lid provides easy access to the removable camera sled with multiple holes
Link-lock latch can be used with a padlock for security
Can be inverted for additional camera elevation
Two adjustable (PG13.5) glands on the bottom make installation of power and video cables easy
CE-compliant, UL/cUL-listed and meets NEMA Type 4 and IP66 standards
Sony Super HAD technology
1/3" color CCD image sensor with 768 x 494 pixels
Horizontal resolution of 480TVL
Minimum illumination -0.5 lux
Extended dynamic range (12x)
Adjustable back focus
C/CS lens mount
2 color balance settings
Digital signal processing
Automatic gain control and automatic backlight compensation
Removable mount adaptor for top or bottom mounting
Quick-connect power connection
BNC video connector
24VAC / 12VDC power
13VA3-8 Varifocal Lens:
CS mount lens
Standard square 4-pin plug for easy installation
Direct-drive adjustable and 2.7x optical zoom (manual)
Focal length of 3-8 mm
Relative aperture size between f/1.0 and closed
Minimum object distance -0.2m
Back focal length -8.36mm
Pan: 0-380° movement in horizontal plane
Speed: 3°, 6°, and 12° per sec
Maximum Load: 35 lb (15.7 kg) centered
Operation: Upright or inverted
Bearings: Heavy duty ball bearings
Overload: ProtectionThermal protected
Input Voltage: 22-28 VAC
Power Requirements: 0.75A (20 VA) at 24 VAC
Connectors: Wire nuts (provided), butt splice (not provided)
Motors: Stepper motor, continuous duty, instantaneous reversing
Limit Switches: Auto scan switching; external adjustment
Conductors: 7, unshielded (functions: left, right, auto, motor common, safety ground, AC HI, AC LO)
Maximum Operating Distances:
20 AWG -5600' (1706 m)
18 AWG -9000' (2743 m)
16 AWG -14300' (4368 m)
Finish: Gray polyester powder coat
Environment: Indoor/outdoor; -10 ~ +120°F (-23 ~ +49°C)
Dimensions WxH: 6.1 x 7.8" (15.2 x 19.9cm)
Unit Weight: 9.9 lbs (4.5kg)
- PS20 Medium-duty Scanner
- EH3512-2HD Enclosure (24VAC)
- CC3710H2 Digital Camera (1/3" CCD)
- 13VA3-8 Varifocal Lens (3-8 mm)
- SS3512 Sun Shroud
- Upright or Inverted Operation
- Scans Past 360°
- Indoor/Outdoor Enclosure with Heater
- Extended Dynamic Range (12x)