Home > Shop Brands > Pelco >

  Pelco PEL-PT48024P Pan and Tilt

Pelco PEL-PT48024P Pan and Tilt


Our Price : $939.99

Product Code: PEL-PT48024P


Pelco's Legacy Series integrates your pan/tilt, enclosure, receiver and mount in one convenient, easy-to-install, and inexpensive package. Select from any of the PT480 Series pan/tilts and EH3500L or EH4700L Series environmental enclosures available to create the basic system. Then, select an appropriate receiver and mount to complete your system package. PT480 Series Pan and Tilt The PT480 Series pan/tilt is capable of handling loads up to 20 pounds (9.06 kilograms) and features a RediLINK connector that attaches the enclosure, mechanically and electrically, to the pan/tilt in seconds. Gold plated electrical pin connectors ensure reliable contact and smooth operation.

The PT480 Series pan/tilt also features a Delrin worm gear which requires no lubrication, is corrosion-resistant, and ensures long life. Limit stops are internally adjustable. Specially design clamshell covers with 2-screw access are easily removed and allow easy access to all internal parts without having to remove the enclosure, camera and lens. Options include preset positioning (PP), heater blanket, and 360 degree pan positioning (SL).EH3500L/EH4700L Enclosure You may select our EH3500L or EH4700L Series enclosure, depending on your camera and lens.requirements. Both enclosures feature a rear opening front hinged lid with gas strut, adjustable camera sled, and tilt table which is attached to the bottom of the enclosure. Because the pan/tilts have pre-wired internal feedthrough for all enclosure and camera functions, all you need to do is install the camera and lens, make the necessary connections inside the pre-wired housing and attach the enclosure to the pan/tilt. Enclosure options include blower, heater, defroster, and sun shroud. An optional thermal insulation kit for low temperature environments is available for the EH4700L Series only.

A simple 3-wire power connection with on/off switch supplies power to the entire system. Choose from fixed or variable speed models, with or without presets, for 120/24/230 VAC applications. Compatible with Coaxitron control systems. LRD41C Series also compatible with Pelco serial RS422 control systems utilizing "D" or "P" type protocols. LWM41 Wall Mount The LWM41 is a universal wall mount for all Legacy pan & tilts. Constructed from aluminum, the mount opens from the bottom for easy access and installation of the LRD41A/LRD41C Series receiver and is NEMA 4 rated. It can also be used for pole, corner and parapet applications when used with the appropriate adapter.



Pan Rotation:Movement in horizontal plane:0-355 0-360 (SL models only)
Pan Speed: 7/sec 1
Tilt Rotation: 90 down from horizontal; 60 up from horizontal
Tilt Speed: 3/sec .5
Torque Output: 9.2 ft.lbs (12.5 N.m) at rated voltage and 75F (23.9C)
Maximum Load: 20 lbs (9.06 kg) at specified torque
Pan & Tilt:
Drive System Delrin worm gear. Ground and polished stainless steel worm
Pan & Tilt Bearings: Roller thrust bearings and bronze Oilite bushings
Bearings NLGI #2; Lithium complex grease fortified with molybdenum
Chain: Teflon chain lubricant (e.g., Tri-Flon)
Braking: Friction

Input Voltage: 24 VAC, 50/60 Hz
Input Voltage: 24 VAC, 50/60 Hz
Pan: 14.4 vA (.12 amp) 9.6 vA (.4 amp)
Tilt: 14.4 vA (.12 amp) 9.6 vA (.4 amp)
Total vA Required: 28.8 vA (.24 amp) 19.2 vA (.8 amp
Maximum: Current 2 amps per conductor (SL models only)
Connectors: Amp CPC type, mate supplied (37 pins)
Motor Type: Single phase instantaneous-reversing induction type, 120 VAC or 24 VAC, 50/60 Hz, impedance protected. 50% duty cycle; 30 minute rating.
Limit Switches: 5 amp, 250 VAC maximum. Internal adjustment

Conductor Requirements:
Standard model: 20 unshielded, plus video & camera sync coax
Standard with/PP: 27 unshielded, plus video & camera sync coax
Standard with/SL: 14 unshielded, plus video & camera sync coax
Standard with SL/PP: 20 unshielded, plus video & camera sync coax


Pan/Tilt: Aluminum exterior; painted steel and aluminum interior parts
Worm Gear: Delrin, premium performance acetal
Worm: Ground and polished stainless steel
Dimensions: See dimension drawing on front
Environment: Indoor/outdoor

Ambient Operating:
Temperature: 0F to 140F (-17.78C to 60C)
Weight: 16 lb (7.2 kg) approximate
Shipping Weight: 19 lb (8.6 kg) approximate

u CE compliant (model PT480P/PT480-24P Series)
u NEMA 4
  • Indoor/Outdoor Applications
  • RediLINK Quick Connection Feature
  • Delrin Worm Gear Drives
  • Optional Preset Positioning and 360 Degree
  • Pan Rotation
  • Gold Plated Pin Connectors Ensure Reliable
  • Contact
  • Pre-Wired, Internal Feedthrough
  • Easily Removed Clamshell Covers
  • Bottom-opening Wall Mount Houses Integral
  • Receiver/Driver
  • Receiver/Driver Offers Adjustable Lens
  • voltages, Selectable Camera Voltages NTSC or
  • PAL Video, Transient Suppression Circuit
  • Protection and Auto/Random Scan as Standard Features
  • Patent #5,224,675

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please