Home > Shop Brands > Pelco >

  Pelco PEL-SD427PRME0 Spectra IV SE 27X Pendant Mount Environmental Pressurized Light Gray Housing Smoked Bubble Fiber Optic Feed

Pelco PEL-SD427PRME0 Spectra IV SE 27X Pendant Mount Environmental Pressurized Light Gray Housing Smoked Bubble Fiber Optic Feed


Our Price : $3,401.45

Product Code: PEL-SD427PRME0


Pelco's Pressurized Spectra IV SE Series dome system provides ultimate protection of the camera optics and electronics from moisture, corrosive gases, and airborne contaminants. Domes are easily pressurized with dry nitrogen to 8 psig (55 kPa) before or after installation to stabilize the environment inside the system.

Sensors strategically placed in the dome system send an "Alert" message when changes in internal pressure, temperature, or dew point are beyond factory-set acceptable limits. The sensors also allow for instant on-screen display of internal temperature, pressure, and dew point.

The components of the Pressurized Spectra IV SE Series include an environmental pendant style back box and a lower dome designed for optimum optical clarity. All stainless steel construction provides added protection in harsh environments.

The back box features a sun shroud, heater, and fan to maintain a consistent operating environment. The back box also features built-in back box memory, an integrated passive UTP circuit, two auxiliary outputs, seven alarm inputs, and is compatible with all Spectra IV SE Series dome drives.

The lower dome features an innovative O-ring seal and a stainless steel V-band to create a reliable pressure seal. The V-band has a unique latching system with one captivated fastener making lower dome installation easy. Accessible on the lower dome trim ring are a Schrader valve for system purging and a pressure relief valve.

The Pressurized Spectra IV SE Series is supplied with a prewired cable with mating connector. The cable includes all wires for system functionality, including power, alarms, auxiliaries, coaxial video, UTP video, and serial control.

Also available are pressurized back box models with ?ber optic feedthrough that allow Pelco's FS85011A and third-party ?ber optic transmitters to be installed inside the back box. These models include either a 9/125 m single-mode or 62.5/125 m multimode ?ber optic cable with an ST-type connector.

Optional diagnostic/installation tools include a remote monitor kit (IPS-RMK) and a remote monitor cable (IPS-CABLE). These accessories allow the installer to view video, control PTZ functions, and perform system setup and software upgrades at the installation site.



Input Voltage:
18 to 32 VAC; 24 VAC nominal
22 to 27 VDC; 24 VDC nominal

Input Power:
24 VAC:
23 VA nominal (without heater)
73 VA nominal (with heater)

24 VDC: 0.7 A nominal (without heater)

Fuse: 1.25 A
Auxiliary Outputs: 2
Alarm Inputs: 7


Bubble: Polycarbonate, 0.090-inch thick
Light Attenuation: 1 F-stop (smoked); zero light loss (clear)

V-Band: Type 316L stainless steel
Pressure Relief: Brass
Schraeder Valve: Brass
Connector: Nickel-plated steel

Mounting: 1.5-inch NPT, threaded

Valve: Schrader
Pressure: 8 psig (55 kPa) (not factory pressurized)
Pressure Relief: 10 psig (69 kPa)

Operating Temperature: (Assumes no wind chill factor; for detailed test conditions, contact Pelco)
Maximum: 140F (60C) absolute maximum; 122F (50C) sustained maximum
Minimum: -60F (-51.11C) absolute minimum; minimal icing at sustained minimum of -50F (-45C); prevents icing at sustained minimum of -40F (-40C); de-ices 0.1 inch (2.5 mm) within 3 hours after power-up

Back Box:
Unit: 10.2 lb (4.6 kg)
Shipping: 13 lb (5.9 kg)

Lower Dome:
Unit: 3.3 lb (1.5 kg)
Shipping: 7 lb (3.2 kg)

CE, Class B
FCC, Class B
UL/cUL Listed
S Mark for Argentina
Meets NEMA Type 6P and IP67 standards
  • Pressurized to 8 psig (55 kPa)
  • Solid-State Sensors for Internal Temperature, Pressure, and Dew Point
  • On-Demand Environmental Status Display for Internal Temperature, Pressure, and Dew Point
  • On-Screen Alert Modes
  • On-Screen Programmable Menus for Pan/Tilt, Camera, and Sensor Alert Settings
  • Built-in Back Box Memory
  • Integrated Passive UTP Circuit
  • 2 Auxiliary Outputs and 7 Alarm Inputs
  • Environmental Pendant Style Back Box
  • Stainless Steel Construction
  • Meets NEMA Type 6P and IP67 Standards
  • Compatible with 27X and 35X Spectra IV SE Dome Drives
  • Built-in Power Line Surge and Limited Lightning Protection
  • Fiber Optic Feedthrough Models Available

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please