Home > Shop Brands > Pelco >

  Pelco PEL-SD435HCPE0X Spectra IV 35X Lowlight Heavy Duty Evironmental Pendant Cage Smoked NTSC

Pelco PEL-SD435HCPE0X Spectra IV 35X Lowlight Heavy Duty Evironmental Pendant Cage Smoked NTSC


Our Price : $2,699.60

Product Code: PEL-SD435HCPE0X


The Pelco Spectra IV SE 35x Heavy-duty Dome System (Environmental Pendant, Smoke Dome, Cage) includes an environmental pendant mount, a smoked dome with a protective cage and a 35x day/night camera. The indoor system offers high structural integrity and resistance to vandalism. It is suited for schools, detention centers, prisons and vandalism-prone operation areas.

The aluminum environmental pendant mount with a thick shroud and dual wall construction secures the camera and features built-in memory, heater, fan, an integrated passive UTP circuit, 2 auxiliary outputs, and 7 alarm inputs.

The smoked lower dome ensures high optical clarity and has an operating temperature of 32 -122 F. The polycarbonate dome is injection molded and is 3.5 times stronger than earlier heavy-duty domes. The aluminum trim ring has 2 barrel-type key locks to make the system more tamper-resistant.

To safeguard against vandalism, the lower dome has a black stainless-steel cage that protects the dome. Designed for minimal obstruction of the view, the dome is also removable for cleaning. The camera eliminates interference from the cage by automatically focusing through the cage bars at medium to high zoom.

A 1/4" EXview HAD image sensor in the DD4CBW35 day/night camera offers a high resolution of 540TVL with 2:1 interlace scanning. With 128x wide dynamic range, the camera provides high-quality images even in low light conditions. It has a varifocal lens with a focal length of 3.4-119 mm at f/1.4 and a 35x optical zoom.

The auto-focus feature automatically focuses the camera on to the selected object or area. Auto white balance takes a standard white color reference to adjust the RGB (red, green, and blue) colors to produce good quality images in a wide range of lighting conditions. Automatic iris control adjusts the amount of light passing through the lens. AC line lock is used to eliminate timing discrepancies in H/V sync that cause picture interruptions at the switching point. In addition to image enhancement, the camera also has electronic image stabilization that counters the vibrations caused by moving traffic or strong winds.

The unit bears the following certifications/ratings: CE-Class B, FCC-Class B, UL/cUL-listings, C-Tick, and S Mark for Argentina. The system also meets NEMA Type 1 and IP40 standards and is covered under U.S. Patents D457, 904 and D460, 978.


Signal System: NTSC
Image Sensor: 1/4" Color progressive scan CCD
Number of Pixels: 768 x 494
Resolution: 540 TVL

Focal Length: 3.4-119mm, F1.4
Zoom: 35x optical, 12x digital
Zoom Speed: 3.2/4.6/6.6 seconds
Horizontal Angle of View: 55.8 at 3.4mm wide / 1.7 at 119mm tele
Focus: Automatic with manual override

Iris Operation: Auto with manual override

Minimum Illumination:
Color: 0.55 lux at 1/60 sec
Color: 0.018 lux at 1/4 sec
B/W: 0.00018 lux at 1/2 sec

Signal-to-Noise Ratio: >50dB
Pan Angle: 360

Pan Speed:
Manual: 0.1-80/sec
Manual Turbo: 150/sec
Preset: 400/sec

Tilt Angle: +2 ~ -92

Tilt Speed:
Manual: 0.1-40/sec
Preset: 200/sec (20 without controller)

Preset Positions: 256

Wide Dynamic Range (128x)
Electronic Image Stabilization
Image Enhancement
Electronic Shutter 1/2-1/30,000 (manual/auto)
White Balance (automatic with manual override)
Gain (auto/off)

Video Output: BNC and UTP
Audio Output: No
Motion Detection: No
Sync System: Internal/AC line lock, phase adjustable using remote control, V-Sync
Communication Port: Coaxitron, RS-422, RJ-45 (for software update and setup)
Communication Protocol: Coaxitron or RS-422 P and D (accepts competitive control protocol with optional translator card)
Alarm I/O: 7 Alarm inputs, 2 relay outputs

Back Box: aluminum
Camera: aluminum, thermoplastic
Bubble: polycarbonate, 0.09" thick
Cable Entry: through 1.5" NPT pendant mount
Cage: thickness 0.12 x 0.30" cast stainless steel

Power Requirements: 24VAC or 24VDC

Power Consumption:
AC: 23VA (73VA with heater)
DC: 0.7A (3A with heater)

Operating Temperature:
Maximum: 140F (60C) absolute maximum; 122F (50C) sustained maximum
Minimum: -60F (-51C) absolute minimum; minimal icing at sustained minimum of -50F (-45C); prevents icing at sustained minimum of -40F (-40C); de-ices 0.1" (2.5 mm) within 3 hours after power-up

Diameter and Height: 9.7 x 10.1" (24.6 x 25.7cm)

Dome Drive: 3.3 lbs (1.5kg)
Back Box: 4.5 lbs (2kg)
Lower Dome: 3.8 lbs (1.7kg)
  • 3 Autofocus, High Resolution Integrated Camera/Optics Packages; Multiple Back Box Models
  • Day/Night, 540 TVL, 128X Wide Dynamic Range (WDR), Motion Detection, and Electronic Image Stabilization (SD435 Series)
  • Day/Night, 540 TVL, 80X Wide Dynamic Range, and Motion Detection (SD4CBW Series)
  • Window Blanking
  • Camera Title Overlay, 20 User-Definable Characters
  • Horizontal and Zone Blanking
  • On-Screen Compass and Tilt Display
  • Password Protection
  • Freeze Frame During Presets
  • Built-in Surge and Limited Lightning Protection
  • Integrated Passive Unshielded Twisted Pair (UTP) Circuit
  • Internal Scheduling Clock
  • Ability to Add IP Network Capability by Purchasing Optional TXB-IP Module
  • Aluminum construction
  • Keeps the camera secure
  • Built-in memory, heater, fan, integrated passive UTP circuit, 2 auxiliary outputs, 7 alarm inputs

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please