 |
 |
 |
|
The Pelco Spectra IV IP 35x Network Dome System (Standard Pendant, Chrome Dome) consists of a standard pendant light gray back box, dome drive with 35x day/night camera and chrome lower dome, and is used to control and monitor video over IP networks. The system allows you to view and control analog video while viewing, recording, and controlling network IP video.
The standard pendant back box has a built-in memory for storing camera/dome settings. It also features a quick disconnect system, which makes drive installation or replacement quick and easy.
Built-in 100Base-TX network interface enables live streaming to any network application. Open architecture connectivity for third-party software recording solutions allows integration into any IP-based system. The system is compatible with Digital Sentry video management systems and when connected to an Endura network-based video security system, the dome system can access EnduraStor and EnduraView for optimized image quality and bandwidth efficiency.
The dome system is easy to install and maintain, and allows you to simultaneously control and view analog video while viewing, recording, and controlling network IP video. With the help of Spectra IV IP's professional compression method, you can monitor and control video in the analog domain while recording video in the network domain. It has horizontal zone, window blanking, and an on-screen compass and tilt display, and offers zero light attenuation. The dome drive also offers 256 presets with a preset accuracy of ±0.1°.
The DD4CBW35 day/night camera has a 1/4" EXview HAD image sensor and offers a high resolution of 540TVL. It has a 2:1 interlace scanning system. With a 128x wide dynamic range, the camera provides high-quality images even in low-light conditions. It has a varifocal lens with a focal length of 3.4-119 mm at f/1.4 and 35x optical zoom.
Auto white balance takes a standard white color reference to adjust the RGB (red, green, and blue) colors to produce good quality images in a wide range of lighting conditions. Automatic iris control adjusts the amount of light passing through the lens. The AC line lock is used to eliminate timing discrepancies in H/V sync that cause picture interruptions at the switching point. In addition to its auto-focus and image enhancement features, it also has electronic image stabilization that eliminates vibrations in the camera caused by moving traffic or strong winds.
Light Gray Back Box:
Standard pendant back box offers built-in memory stores camera/dome settings
Quick disconnect to dome drive
Aluminum construction
Environmental model includes sun shield, fan, and heater
Dome Drive:
Open architecture connectivity for third-party software recording solutions allows integration into virtually any IP-based system
Offers live streaming to any network application via its built-in 100Base-TX network interface
Compatible with Digital Sentry video management systems
Simultaneous IP and analog video and control
Offers 3 simultaneous video streams: Dual MPEG-4 and MJPEG
Supported Protocols - TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, and NTP
Offers optimized image quality and bandwidth efficiency with EnduraStor and EnduraView
Provides simultaneous viewing, recording, and controlling network IP video
Multilevel password protection
Sensitivity down to 0.00018 lux
On-screen compass and tilt display
Web browser, Endura and third-party network interface
Bidirectional full-duplex audio
Provides multilingual menus (English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech)
RJ-45 data port for software update and setup
On-screen compass, tilt, and zoom display
400°/sec pan preset speed and 200°/sec tilt preset speed
Rotating discreet liner with sealed fixed bubble
Window blanking: up to 8, four-sided, user-defined shapes
8 zones (configurable in size) can be labeled with up to 20 characters
7 alarm inputs
1 auxiliary (Form C) relay output and 1 open collector auxiliary output
Can be alternately programmed to operate upon alarm
Configurable locations of labels and on-screen displays
Alarms can be individually programmed for 3 priority
Levels to initiate a stored pattern, or to go to an associated preset when received
Patterns: up to 8, on-screen, user-defined configurable patterns
Includes pan, tilt, zoom, and preset functions
Variable scan speed: scan speed can be configurable between 1-40°/sec
Pan motion allows 0.1 to 150°/sec pan speed
Configurable limit stops for auto/random/frame scan modes
Auto sensing protocol (Coaxitron RS-422 Pelco P and Pelco D)
Sensormatic Vicon accepts other control protocols with optional translator card
Digital position and zoom control and feedback through Pelco D Protocol
Built-in menu system for setup of configurable functions
Auto flip rotates dome 180° at bottom of tilt travel
Configurable zoom speeds
Low lux noise reduction
Certifications: CE-Class B, FCC-Class B, UL/cUL-listed, C-Tick, U.S. Patents 5,931, 432; 6, 793, 415 B2; 6, 802, 656 B2; 6, 821, 222 B2; 7, 161, 615 B2, NEMA Type 4X, IP66, NEMA Type 1, IP40
35x Day/Night Camera:
1/4" EXview HAD image sensor and offers a resolution of 540TVL
Varifocal lens with a focal length of 3.4-119 mm at f/1.4 and a 35x optical zoom
2:1 interlace scanning system
128x wide dynamic range provides high-quality images even in low light conditions
Auto-focus - automatically focuses the camera on to the selected point or area
Auto white balance with manual override takes a standard white color reference to adjust the RGB (red, green, and blue) colors to produce good quality images in a wide range of lighting conditions
Automatic iris control with manual override adjusts the amount of light passing through the lens
AC line lock eliminates timing discrepancies in H/V sync that cause picture interruptions at the switching point
Electronic image stabilization clears vibrations in the camera caused by moving traffic or strong winds
Chrome Lower Dome:
Chrome acrylic lower dome
Specifications:
Camera
Signal System: NTSC
Image Sensor: 1/4" Color EXview HAD CCD
Number of Pixels: 768 x 494
Resolution: 540 TV Lines
Lens:
Focal Length: 3.4-119mm, F1.4
Zoom: 35x optical, 12x digital
Zoom Speed: 3.2/4.6/6.6 seconds
Horizontal Angle of View: 55.8° at 3.4mm wide / 1.7° at 119mm tele
Focus: Automatic with manual override
Iris Operation: Auto with manual override
Minimum Illumination:
0.55 lux at 1/60 sec (color)
0.018 lux at 1/2 sec (color)
0.00018 lux at 1/2 sec (B-W)
Signal-to-Noise Ratio: >50dB
Pan Angle: 360° continuous pan rotation
Pan Speed:
0.1° to 80°/sec manual operation, 150°/sec Turbo
Preset Speed: 400°/sec 1
Tilt Angle: Unobstructed +2° to -92°
Tilt Speed:
0.1° to 40°/sec manual operation
Preset Speed: 200°/sec 2
Preset Positions: 64 (±0.1° Preset Accuracy)
Controls:
Day/Night
Wide Dynamic Range (128x)
Electronic Image Stabilization
Image Enhancement
Electronic Shutter 1/2-1/30,000 (manual/auto)
White Balance (automatic with manual override)
Gain (auto/off)
Video Output: BNC or UTP
Audio Input: x1 (terminal block)
Audio Output: x1 (terminal block)
Motion Detection: No
Sync System: Internal/AC line lock, phase adjustable using remote control, V-Sync
Communication Port: Coaxitron, RS-422, RJ-45 (for software update and setup)
Communication Protocol: Coaxitron or RS-422 P and D (accepts competitive control protocol with optional translator card)
Alarm I/O: 7 alarm inputs, 2 relay outputs
Network:
Interface: RJ-45 connector for 100Base-TX Auto MDI/MDI-X Autonegotiate/Manual setting
Compression: MJPEG, MPEG-4 (available only with Microsoft Internet Explorer)
Video Streaming: 3, simultaneous
Resolution:
4CIF: 704 x 480 NTSC / 704 x 576 PAL
2CIF: 704 x 240 NTSC / 704 x 288 PAL
CIF: 352 x 240 NTSC / 352 x 288 PAL
QCIF: 176 x 120 NTSC / 176 x 144 PAL
Bit Rate:
MPEG-4
30 ips, 2 Mbps for primary stream, 1 Mbps for secondary stream; implements EnduraView
MJPEG
15 ips, 3 Mbps, MJPEG
Web User Interface: Pelco Device Utility interface for viewing HTTP, requires Java Runtime Environment (JRE)
Simultaneous Client Access: 5 simultaneous users MJPEG and/or MPEG-4 unicast; unlimited number of users using multicast (MPEG-4 only)
Minimum System Requirements:
Processor: Intel Pentium 4 microprocessor, 1.6 GHz
Operating System: Windows 98, Windows 2000, Windows XP (or later), or Mac OS X 10.3.9 (or later)
Memory: 512 MB RAM
Network Interface Card: 100 megabits
Web Browser: Internet Explorer 5.5 (or later); Mozilla Firefox 1.5 (or later)
Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
Firmware Upgrade: Pelco Device Utility or Endura Application
Supported Protocols: TCP/IP, UDP/IP (unicast, multicast IGMP), UPnP, DNS, DHCP, RTP, NTP
Enclosure
Construction:
Back Box: aluminum
Camera: aluminum, thermoplastic
Bubble: acrylic
Cable Entry: through 1.5" NPT pendant mount
Power Requirements: 24VAC or 24VDC
Power Consumption:
AC: 23 VA nominal (without heater) / 73 VA nominal (with heater)
DC: 0.7 A nominal (without heater) / 3 A nominal (with heater)
Operating Temperature:
(assumes no wind chill factor)
Maximum: 113°F (45°C) absolute maximum; 95°F (35°C) sustained maximum
Minimum: 25°F (-4°C) sustained minimum
Dimensions (WxH): 8.6 x 10.6" (21.8 x 26.9cm)
Weight: 6.5 lbs (3kg)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Standard Pendant Light Gray Back Box
- Dome Drive with 35x Day/Night Camera
- Chrome Lower Dome
- Compatible with Digital Sentry Systems
- Controls Video over IP Networks
- Built-in 100Base-TX Network interface
- 1/4" EXview HAD Image Sensor
- Horizontal Zone & Window Blanking
- On-screen Compass & Tilt Display
- Advanced 128x Wide Dynamic Range
|
|
|
|
|
|
|
|
|
