Home > Shop Brands > Pelco >

  Pelco PEL-SD53CBWPSGE1 Pelco Spectra III Stainless Steel Dome Camera

Pelco PEL-SD53CBWPSGE1 Pelco Spectra III Stainless Steel Dome Camera


 

Our Price : $3,306.46


Product Code: PEL-SD53CBWPSGE1

Qty:

Description
 
Pelco's Stainless Steel Spectra III is designed for harsh environmental installations and meets NEMA Type 4X and IP66 standards. The components (back box and lower dome) provide added protection against corrosive conditions. The pendant-style back box (BB53-PSG-E) is constructed of Type 316 Stainless Steel (SS) and includes a sun shield (also constructed of Type 316 SS), heater and fan. The lower dome features a trim ring constructed of Type 316 SS and an optically clear bubble that is available in smoked (LD53PSB-0) or clear (LD53PSB-1) acrylic.

The Stainless Steel Spectra III has all the features of the Spectra III SE dome system (built-in back box memory, two auxiliary outputs, seven alarm inputs) and is also compatible with a ll Spectra III SE and Spectra III dome drives.

Camera and lens options for the Stainless Steel Spectra III include: -Day/night camera, 80X wide dynamic range, motion detection, LowLight technology, and 23X optical zoom with 10X digital zoom -Day/night camera, LowLight technology, and 18X optical zoom with 10X digital zoom -High-resolution color camera with an EXview HAD CCD, LowLight technology 22X optical zoom with 12X digital zoom -High-resolution black-white camera with an EXview HAD CCD, LowLight technology and a 22X optical zoom with 12X digital zoom -High-resolution color camera with LowLight technology 16X optical zoom with 8X digital zoom For an alternative mounting option use the IDM4012SS wall mount.

The IDM4012SS mount is designed speci?cally for the Stainless Steel Spectra III Series and features all stainless steel construction and conduit access in the bottom and back of the mount.

Specifications:

Electrical:

Input Voltage: 18-30 VAC; 24 VAC nominal
Input Power: 75 VA nominal
Fuse: 1.6A
Auxiliary Outputs: 2
Alarm Inputs: 7

General:

Construction:

Back Box: 316 Stainless steel; gray, polyurethane powder coated ?nish
Lower Dome: Trim Ring 316 Stainless steel; black, polyurethane powder coated ?nish
Bubble: Acrylic, clear or smoked
Cable Entry: Through 1.5-inch NPT back box pendant mount
Environment: Indoor/Outdoor
Operating Temperature: (Assumes no wind chill factor; for detailed test conditions, contact Pelco.)
Maximum: 140F (60C) absolute maximum; 122F (50C) sustained maximum.
Minimum: -60F (-51.11C) absolute minimum; minimal icing at sustained minimum of -50F (-45.56C); prevents icing at sustained minimum of -40F (-40C); de-ices 0.1 inch (2.5 mm) within 3 hours after power-up.

Certifications:
CE, Class B
UL Listed
UL Listed to Canadian safety standards
FCC, Class B
Meets NEMA Type 4X, IP66 standards when installed properly
Complies with Argentina compliance requirements under Res. 92/98

Optional Accessories:

IPS-CABLE: Remote monitor cable and software. See www.pelco.com for a list of compatible devices.
IPS-RDPE-2: Remote data port. 24 VAC, wall/pole mount video/data breakout box. Allows ground-level control/programming and Spectra III OS software upgrades when used with the IPS-RMK or IPS-CABLE.
IPS-RMK: Remote monitor kit.
TXB Series: Translator boards for AD Manchester, Bosch (Philips, Burle), Sensormatic, Vicon, and NTCIP protocols.
VC-UTP: Converts video for use with unshielded twisted pair (UTP); maximum distance to passive receiver 500 feet (152 m). Plugs into TXB connector in Spectra back box. Coaxitronready when used with passive receiver. Works with all major suppliers of UTP modules. Not for use in conjunction with TXB boards.
FS85011:Fiber transmitter sends one unidirectional composite video channel and one bidirectional data channel over one multimode or single-mode ?ber optic cable.If TXB or FS85011 boards are installed, it is not possible to upgrade system operating software through the remote data port (IPS-RDPE-2).

Recommended Power Supplies:
WCS Series: Single/multiple 24 VAC camera power supply, outdoor

Recommended Mount:
IDM4012SS Stainless steel wall mount with feed-through capabilities
Features
  • All Stainless Steel Construction
  • Built-in Back Box Memory
  • 7 Alarm Inputs; 2 Programmable Auxiliary Outputs
  • Built-in Surge and Limited Lightning Protection
  • Compatible with All Spectra III SE and Spectra III Dome Drives
  • Bubble Constructed of Optically Clear Acrylic
  • Environmental Pendant Model Only
  • Indoor/Outdoor Applications
  • Meets NEMA Type 4X and IP66 Standards

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please