Home > Shop Brands > Pelco >

  Pelco PEL-SD53TCPRE1 Pelco Spectra III Pressurized

Pelco PEL-SD53TCPRE1 Pelco Spectra III Pressurized


 

Our Price : $2,760.52


Product Code: PEL-SD53TCPRE1

Qty:

Description
 
Pelco's Pressurized Spectra III Series dome system provides ultimate protection of the camera optics and electronics from moisture, corrosive gases, and airborne contaminants. Domes are easily pressurized with dry nitrogen to 8 psig (55 kPa) before or after installation to stabilize the environment inside the system. Sensors strategically placed in the dome system send an "Alert" message when changes in internal pressure, temperature, or dew point are beyond factory-set acceptable limits.

The sensors also allow for instant on-screen display of internal temperature, pressure, and dew point. The components of the Pressurized Spectra III Series include an environmental pendant style back box and a lower dome designed for optimum optical clarity. All stainless steel construction provides added protection in harsh environments. The back box features a sun shroud, heater, and fan to maintain a consistent operating environment.

The back box also features built-in back box memory, two auxiliary outputs, seven alarm inputs and is compatible with all Spectra III SE and Spectra III Series dome drives. The lower dome features an innovative O-ring seal and a stainless steel V-band to create a reliable pressure seal. The V-band has a unique latching system with one captivated fastener making lower dome installation easy. Accessible on the lower dome trim ring are a Schrader valve for system purging and a pressure relief valve. The Pressurized Spectra III Series is supplied with a prewired cable with mating connector. The cable includes all wires for system functionality, including power, alarms, auxiliaries, coaxial video, UTP video, and serial control.

Also available are pressurized back box models with ?ber optic feedthrough that allow Pelco's FS85011 and third-party ?ber optic transmitters to be installed inside the back box. These models include either a 9/125 m single-mode or 62.5/125 m multimode ?ber optic cable with an ST-type connector. Optional diagnostic/installation tools include a remote monitor kit (IPS-RMK) and a remote monitor cable (IPS-CABLE). These accessories allow the installer to view video, control PTZ functions, and perform system setup and software upgrades at the installation site.

Specifications:

Electrical:

Input Voltage: 18-30 VAC; 24 VAC nominal
Input Power: 75 VA nominal (with heater)
Fuse: 1.25 A
Auxiliary Outputs: 2
Alarm Inputs: 7

General:

Construction:
Back Box and Lower Dome: Type 316L stainless steel
Bubble: Polycarbonate, 0.090-inch thick
Light Attenuation: 1 f-stop (Smoked); zero light loss (Clear)
V-Band: Type 316L stainless steel
Pressure Relief: Brass
Schraeder Valve: Brass
Connector: Nickel-plated steel
Mounting: 1.5-inch NPT, threaded

Pressurization:

Valve: Schrader
Pressure: 8 psig (55 kPa) (not factory pressurized)
Pressure Relief: 10 psig (69 kPa)
Operating Temperature: (Assumes no wind chill factor; for detailed test conditions, contact Pelco.)
Maximum: 140F (60C) absolute maximum; 122F (50C) sustained maximum.
Minimum: -60F (-51.11C) absolute minimum; minimal icing at sustained minimum of -50F (-45C); prevents icing at sustained minimum of -40F (-40C); de-ices 0.1 inch (2.5 mm) within 3 hours after power-up.

Certifications:

CE, Class B
UL Listed
UL Listed to Canadian safety standards
FCC, Class B
Meets NEMA Type 6P and IP67 standards
OPTIONAL ACCESSORIES
IPS-RMK: Remote monitor kit
IPS-CABLE: Remote monitor cable and software kit
IPS-RDPE-2: Remote data port
EH8000RKIT: Dry nitrogen recharging kit (cannot be re?lled)
TXB Series: Translator boards for AD Manchester, Bosch/Philips (Burle), Sensormatic, Vicon, and NTCIP protocols.
VC-UTP: Converts video for use with unshielded twisted pair (UTP); cannot be used with TXB translator boards
FS85011: Fiber transmitter sends one unidirectionalvcomposite video channel and one bidirectional data channel over one optical ?ber. Available in multimode and single-mode versions
Mounts: IDM4012SS (stainless steel, wall), IWM Series (wall), MRCA (ceiling), MRWA (wall), PP4348 (parapet roof), and PP350/PP351 (parapet wall/roof)
If TXB or FS85011 boards are installed, it is not possible to upgrade system
operating software through the remote data port (IPS-RDPE-2).
Features
  • Pressurized to 8 psig (55 kPa)
  • Solid-State Sensors for Internal Temperature, Pressure, and Dew Point
  • On-Demand Environmental Status Display for Internal Temperature, Pressure, and Dew Point
  • On-Screen Alert Modes
  • On-Screen Programmable Menus for Pan/Tilt, Camera, and Sensor Alert Settings
  • Built-in Back Box Memory
  • 2 Auxiliary Outputs and 7 Alarm Inputs
  • Environmental Pendant Style Back Box
  • Stainless Steel Construction
  • Meets NEMA Type 6P and IP67 Standards
  • Compatible with All Spectra III
  • SE and Spectra III Dome Drives
  • Built-in Power Line Surge and Limited Lightning Protection
  • Fiber Optic Feedthrough Models Available
  • Pelco's Pressurized Spectra III
  • Series dome syst

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please