Home > Shop Brands > Pelco >

  Pelco PEL-VA6112-S 12 Position Switcher

Pelco PEL-VA6112-S 12 Position Switcher


 

Our Price : $48.06


Product Code: PEL-VA6112-S

Qty:

Description
 
Pelco VA6112 Sequential, Video, With Alarms Switcher, 12 Alarm In X 1 Out, 120VAC

The VA6112 is competitively priced sequential switchers designed to switch 4, 8, 12, or 20 cameras manually or automatically to one or two monitors. The VA6112 switchers are single monitor output switchers without Coaxitron -control compatibility. The VA6112 switchers are equipped with a second monitor output for Coaxitron compatibility. The VA6112 switchers are equipped with alarm inputs. If an alarm occurs, the switcher will automatically lock and direct the input to the currently selected monitor. When an alarm is cleared, the unit will return to its previously operating dynamic state.

Multiple alarms sequence at a 1 second dwell time. All models include external trigger and camera ID as standard features. Camera dwell time can be set individually or globally for all cameras. The dwell time is adjustable from 1 to 60 seconds, in one-second increments. In addition, all models feature terminating inputs that can be easily converted to looping inputs via jumpers on the motherboard. Monitor output for camera ID is also changeable via jumpers on the motherboard.

Specifications:

Model Number: VA6112
Inputs: Terminating: 75-ohm internal termination
Monitor 1 Outputs: 75-ohm source terminated
Monitor 2 Outputs: 75-ohm source terminated; half duplex (Coaxitron compatible). Requires field jumper change
Gain: Unity
Dwell: Camera dwell independently adjustable from 1 to 60 seconds nominal
Frequency Response at Signal Level:10 MHz
Frequency Response at Maximum: 1.5 Vp-p
Frequency Response at Tilt: Less than 2%
Character Generation: Available on monitor 1 or 2:
6 VA Power Requirements: 12-position switcher
Input Voltage: 120 VAC, 50/60 Hz
Alarm In: 2 common plus 1 conductor per alarm input
Alarm Out: Dry contact relay, normally open
Connectors: BNC
Chassis Construction: Steel, zinc plated
Cover Construction: Steel, black polyester powder coat
Panel Construction: Aluminum, with Lexan overlay
Dimensions: 1.75" H x 14.32" W x 8.50" D (4.45 x 36.37 x 21.59 cm)
Environment: 32° to 120°F (0° to 49°C)
Unit Weight: 6 lb (2.71 kg)
Shipping Weight: 8 lb (3.62 kg)
Features
  • 120 VAC Input
  • 4, 8, 12, or 20 Inputs (Terminating or Looping)
  • Single Output (VA6112)
  • Dual Outputs (VA6112)
  • Alarm Inputs Standard Feature
  • Supports NTSC Video
  • Camera ID (up to 20 characters) and External Trigger Standard on All Models


Browse for more products in the same category as this item:

Shop Brands > Pelco