Home > Shop Brands > Pelco >

  Pelco PEL-VA6204-S Pel Sequential Switcher 4 Alarm with Loop

Pelco PEL-VA6204-S Pel Sequential Switcher 4 Alarm with Loop


 

Our Price : $280.64


Product Code: PEL-VA6204-S

Qty:

Description
 
The VA6100 and VA6200 Series are competitively priced sequential switchers designed to switch 4, 8, 12, or 20 cameras manually or automatically to one or two monitors.

The VA6100 Series switchers are single monitor output switchers without Coaxitron -control compatibility. The VA6200 Series switchers are equipped with a second monitor output for Coaxitron compatibility.

The VA6100 and VA6200 switchers are equipped with alarm inputs. If an alarm occurs, the switcher will automatically lock and direct the input to the currently selected monitor. When an alarm is cleared, the unit will return to its previously operating dynamic state. Multiple alarms sequence at a 1 second dwell time.

All models include external trigger and camera ID as standard features. Camera dwell time can be set individually or globally for all cameras. The dwell time is adjustable from 1 to 60 seconds, in one-second increments.

In addition, all models feature terminating inputs that can be easily converted to looping inputs via jumpers on the motherboard. Monitor output for camera ID is also changeable via jumpers on the motherboard.

Specifications:

Video:

Inputs:
-Terminating; 75-ohm internal termination
-NTSC and PAL compatible

Outputs:

Monitor 1: 75-ohm source terminated
Monitor 2: 75-ohm source terminated; half duplex (Coaxitron compatible). Requires ?eld jumper change
Gain: Unity
Dwell: Camera dwell independently adjustable from 1 to 60 seconds nominal
Frequency Response: 10 MHz

Maximum:
Signal Level: 1.5 Vp-p
Tilt Less than: 2%
Character Generation: Available on monitor 1 or 2

Electrical:
Power Requirements:
-2 VA 4-position switcher
-4 VA 8-position switcher
-6 VA 12-position switcher
-8 VA 20-position switcher

Input Voltage:
-120 VAC, 50/60 Hz or
-230 VAC, 50 Hz (as noted in model number)

Alarm In: 2 common plus 1 conductor per alarm input
Alarm Out: Dry contact relay, normally open
Connectors: BNC

General:

Construction:

Chassis: Steel, zinc plated
Cover: Steel, black polyester powder coat
Panel: Aluminum, with Lexan overlay

Dimensions:
VA6104, VA6204 1.75" H x 5.50" W x 8.80" D (4.45 x 13.97 x 22.35 cm)

Environment: 32 to 120F (0 to 49C)

Certifications:

CE, Class A (VA6104-X, VA6112-X, VA6120-X, and VA6204-X)
FCC, Class A (VA6104, VA6108, VA6112, VA6120, VA6204, VA6208, VA6212, and VA6220)
Features
  • 120 or 230 VAC Input
  • 4, 8, 12, or 20 Inputs (Terminating or Looping)
  • Single Output (VA6100 Series)
  • Dual Outputs (VA6200 Series)
  • Alarm Inputs Standard Feature
  • Supports NTSC and PAL Video
  • Camera ID (up to 20 characters) and External Trigger Standard on All Models

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please