 |
 |
 |
|
The VCD5000 video console display is a high-performance, multiple stream decoding unit. Its main function is to convert multiple MPEG-4 streams into video signals to be viewed on a VGA or analog monitor. The VCD5000 also provides a user interface to the Endura system. Depending on the VCD5000 model, up to 16, 32, 48, or 64 streams can be decoded and displayed simultaneously. Video can be displayed on NTSC/PAL composite, NTSC/PAL S-video, or VGA monitors. Every output option can display a single image, four images (2x2), nine images (3x3), or sixteen images (4x4).
When multiple images are displayed, the patent-pending EnduraView technology automatically provides the best video display frame rate for the selected cameras. The VCD5000 provides a user interface to the Endura system. When used with the KBD5000 keyboard, the VCD5000 allows a user to operate the system like a traditional matrix, using the joystick, jog shuttle, and keypad to control the video display.
The VCD5000 also provides NVR-like functionality, allowing users to record, play back, and export video. The VCD5000 provides access to these functions through a graphical overlay on the monitor screen. The user may turn this overlay on and off with a single button push on the KBD5000 keyboard. The overlays are semitransparent so as not to completely block the scene behind the menu. The simpli?ed menu structure and corresponding KBD5000 function buttons make it easy for even inexperienced users to operate the system.
The system facilitates growth in two directions. To add workstations to accommodate multiple users, simply install additional VCD5000s and KBD5000s. To add monitors to decode additional video inputs without adding user workstations, install compatible four-channel decoders (NET5301R) to create a completely scalable virtual matrix.
Specifications:
Model Numbers:
VCD5001: Video console display with one output card (handles up to 16 video streams)
VCD5002: Video console display with two output cards (handles up to 32 video streams)
VCD5003: Video console display with three output cards (handles up to 48 video streams)
VCD5004: Video console display with four output cards (handles up to 64 video streams)
Supplied Accessories:
3 power cables (1 USA standard, 1 European standard, 1 UK standard)
1 rack mounting kit (for mounting in 2 RU rack)
1 resource CD
System:
Processor: Intel Pentium 4, 2.8 GHz
Operating System: Linux
User Interface: Semitransparent on-screen overlays
Video:
Video Standards:
NTSC/PAL composite
NTSC/PAL S-Video
VGA (1024 x 768)
60 Hz capability for NTSC
75 Hz capability for PAL
Video Decoding: MPEG-4
Video Resolutions: NTSC PAL
4CIF: 704 x 480 704 x 576
2CIF: 704 x 240 704 x 288
CIF: 352 x 240 352 x 288
QCIF: 176 x 120 176 x 144
Video Display Speed: Up to 30 images/second
Video Display Modes: Single image, 2x2, 3x3, and 4x4
Video Outputs:
With each video output card:
1 BNC, NTSC/PAL, 75 ohms, 1 Vp-p
1 S-video, NTSC/PAL
1 VGA
Audio:
Audio Decoding: G.711 speech codec
Audio Bit Rate: 64 kbps
Audio Levels:
Input: electret microphone
Output: up to 3 Vp-p, adjustable, minimum load of 8 ohms
Audio Connectors: Three 3.5 mm stereo jacks
Connector Tip: Signal left (input and output)
Connector Ring: Signal right (input and output)
Connector Sleeve: Common
Audio Inputs: Microphone and line in
Audio Outputs: Speaker or line out
Ptz Control:
PTZ Interface: On-screen or through KBD5000
Neywork:
Interface: Gigabit Ethernet RJ-45 port (1000BaseT)
Security: 2 modes: secure mode (device authentication) and unsecure mode
Auxiliary Interfaces:
USB Ports: 3 USB 2.0 ports (one front, two rear)
Front Panel:
Buttons: Power, con?guration/reset
Indicators:
Power: Blue if power
HDD Activity: Yellow when activity
Network Activity: Green when activity
Network Status: Green, amber, red
Unit Status: Green, amber, red
Power:
Power Input: 100-240 VAC, 50/60 Hz, autoranging
Power Supply: Internal
Cable Type:
1 USA standard (117 VAC, 3 prongs, 6 ft or 1.8 m)
1 European standard (220 VAC, 3 prongs, molded connector, 6 ft or 1.8 m)
1 UK standard (250 VAC, 3 prongs, molded connector, 6 ft or 1.8 m)
Environmental:
Ambient Temperature: 70° to 74°F (21° to 23°)
Operating Temperature: 50° to 95°F (10° to 35°C) at unit air intake
Storage Temperature: -40° to 149°F (-40° to 65°C)
Operating Humidity: 20% to 80%, noncondensing
Maximum Humidity Gradient: 10% per hour
Operating Altitude: -50 ft to 10,000 ft (-16m to 3,048 m)
Operating Vibration: 0.25G at 3 Hz to 200 Hz at a sweep rate of 0.5 octave/minimum
Physical:
Construction: Steel cabinet
Finish: Front panel: gray metallic with black end caps; chassis: black matte ?nish
Dimensions: 17.0" D x 17.0" W x 3.5" H (43.2 x 43.2 x 8.9 cm)
Mounting:
Desktop (feet) or rack
2 RU per unit, 1 RU between units
Unit Weight: 28.8 lb (13.06 kg)
Shipping Weight: 38 lb (17.24 kg)
Certifications:
CE, Class A
UL Listed
UL Listed to Canadian safety standards
FCC, Class A
C-Tick
Complies with Argentina compliance requirements under Res. 92/98.
GOST
Optional Accessories:
KBD5000 Series :USB keyboard with joystick, jog shuttle, and keypad modules
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Video Console Display Provides User Interface to an Entire System
- Without the Need for a PC
- Decodes up to 64 Streams of MPEG-4 Video at up to 30 ips per
- Stream (Model VCD5004)
- Video Output Options: NTSC/PAL Composite, NTSC/PAL S-Video,
- VGA (Maximum VGA Resolution: 1024 x 768)
- Scalable Number of Workstations and Video Inputs
- Customizable for Small to Enterprise Systems
- Provides Full Access to Operations through User-Friendly, Highly
- Intuitive, Semitransparent On-Screen Menus
- Heads-up Operation
- Multiple Display Views for Live or Playback Cameras or Devices
- EnduraViewTechnology Optimizes Video Display
- On-Screen PTZ, Device Property Controls, and Alarm Interface Displays
- Exports Video and Still Images in Multiple Formats, Including Pelco Native, QuickTime MPEG-4, PNG, BMP, and JPG
|
|
|
|
|
|
|
|
|
