Home > Shop Brands > Pelco >

  Pelco PEL-WCS14-S Camera Power Supply 4 Amp 1 Output

Pelco PEL-WCS14-S Camera Power Supply 4 Amp 1 Output


Our Price : $113.00

Product Code: PEL-WCS14-S


Power supplies in the WCS Series offer a variety of configurations for powering up to four outdoor units from a single power source. The power supplies provide 24 VAC output for 1-4 units, depending on the model selected. To compensate for voltage losses over long wire runs, 28 VAC outputs also are available on the WCS4-20. The power supplies have a selectable input of 120 or 240 VAC. For integrated systems such as Spectra and Esprit, the power supplies are capable of handling pan/tilt, heater, and blower operation in addition to the camera (see application chart). The WCS1-4 has one fused output and is capable of handling up to 4 amps (100 VA) of total load. The WCS4-20 is a four-output supply capable of handling up to 20 amps (480 VA) of total load. This model is available with either fuses or self-resetting circuit breakers on each output. Fuses provide a greater degree of protection for the unit because they are faster acting and more precise. Circuit breakers will self-reset when the fault is corrected, eliminating the need for replacing fuses. However, the amount of current required to trip a circuit breaker can vary as much as 100 percent, depending on temperature. In the fused models, the values of fuses can be changed depending upon the specific current requirements of the equipment connected.


Type: Outdoor
-Voltage: 4/26/28 VAC
-Connectors: x1
-Connector Type: screw-type barrier strip
-Wire Size: 12-16 gauge solid wire

-Voltage: 100/120/240 VAC
-Connector Type: screw-type barrier strip
-Wire Size: 12-16 gauge solid wire

Maximum Current Capacity: 4 A (100 VA)
Circuit Protection: Fuse
Construction: Aluminum with stainless steel link-lock latch; can be secured with padlock (not supplied)
Finish: Gray polyester powder coat
Cable Entry: Hole plugs for 0.75" (1.9 cm) conduit
Operating Temperature: -50 ~ 122F (-45.56 ~ +50C)
Dimensions (WxHxD): 12.6 x 15.3 x 5.1" (32 x 38.8 x 12.9 cm)
Weight: 6.8 lb (3.1 kg)
  • 4 or 20 Amp Capacities
  • 1-4 Outputs
  • 120 VAC or 240 VAC Selectable Input
  • 24 VAC Output or 28 VAC Output for Longer Wire Runs
  • Meets NEMA Type 4X/IP66 Standards for Weatherproof Enclosure
  • AC Power Indicator with Power On/Off Switch
  • Compatible with Cameras, Domes, and Pan/Tilts
  • WCS4-20B Has Class 2 Rated Outputs

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please