Home > Shop Brands > Pelco >

  Pelco TXB-H Translator Board for Hernis Protocol

Pelco TXB-H Translator Board for Hernis Protocol


Our Price : $107.24

Product Code: TXB-H


The TXBH translator boards allow various controllers to communicate with Pelco's Spectra domes, Spectra Mini domes, ExSite Series, and Esprit Series positioning systems. The optional, easy-to-install subassembly allows these systems, after setup, to receive commands from the controller and convert them to Pelco D protocol. Refer to the following page for the list of third-party controller compatibility. The TXB-TASS translator board is designed for the U.S. Air Force Tactical Automated Security System controllers. TXB-TASS translates the Tactical Automated Security System protocol to smoothly operate Pelco's various integrated camera systems. The TXB-NTCIP translator board has been designed and tested in conformance to the present NTCIP (National Transportation Communications for ITS [Intelligent Transportation Systems] Protocol) standard 1205 for Camera Control Devices. This Pelco product is designed to interface with other manufacturers' products. Stated compatibilities are based upon known tested configurations and protocols, which are subject to modification by individual manufacturers, independent of Pelco. Due to the unknown nature and timing of these changes, Pelco recommends the purchase of a single unit to verify compatibility. If problems occur, Pelco will provide on-site analysis (North America only) of your system's interface protocols, usually within one week from the date of contacting Pelco's Product Support. At the expense of Pelco, an attempt will then be made to solve the problem within two weeks. This analysis necessitates that the end user grant reasonable access to the system for Pelco's personnel during all on-site visits. If a resolution is not possible, Pelco will accept the return, and refund the purchase of any Pelco products associated with this product, including freight expenses. Pelco will not be liable for any installation costs and/or lost revenues due to any incompatibility that cannot be resolved.


Model Number : TXBH
Construction : Printed circuit board (PCB)
Mounting : Subassembly PCB plugs into interconnect PCB of Spectra dome and Mini dome, ExSite and Esprit Systems
Dimensions : 2.1" L x 1.6" W x 0.4" H (5.3 x 4.1 x 1.0 cm)
Unit Weight : 0.05 lb (0.02 kg)
Shipping Weight : 1.0 lb (0.45 kg)
  • Compatible with TASS (Tactical Automated Security System) Controllers
  • Compatible with NTCIP Camera Control Protocol
  • Compatible with American Dynamics , Bosch (Philips, Burle), Hernis, Sensormatic , and Vicon Controllers (as specified)
  • Converts Third-Party Command Signals to Pelco D Protocol
  • For Use in Spectra Domes, Spectra Mini Domes, ExSite Series Systems, and Esprit Series Systems
  • Easy to Install
  • Operation Transparent to User
  • No Additional Hardware Required for Installation

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please