You are here: Home > Fire Alarms >

Detectors for Fire Alarm Systems

>

Photoelectric Smoke Detectors for Fire Alarm Systems

We found 118 results matching your criteria.
Receive an early fire alarm warning signal with UL certified photoelectric smoke detector fire systems at Security Store USA. Photoelectric smoke detectors are able to detect smoky fires, making them the ideal fire equipment for mounting in your kitchen. Choose between battery operated and hard-wired fire alarms with back-up battery, to alert you when a fire breaks out.
Sort By:
Page of 10
BRK MODEL 7010B Photoelectric AC Powered Smoke Alarm With Battery Back-Up BRK MODEL 7010 Photoelectric AC Powered Smoke Alarm
Hardwired smoke alarm with battery back-up meets codes where a photoelectric smoke sensor is required for new construction.

Recommended for installation outside areas that are prone to nuisance alarms such as kitchens, bathrooms and utility rooms.

Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective.

A popular choice in hotel/motel applications. An excellent basic photoelectric smoke alarm.

Features:

  • Photoelectric Sensor
  • Quick Plug-In Power Connector
  • 120 VAC; Interconnectable
  • Alarm Indication
  • Optipath 360 TechnologyTM
  • Locking Feature
  • 10-year Limited Warranty On Alarm
  • BRK SA710B Battery Operated Photoelectric Smoke Alarm KIDDE 3K-442006-006 PI2000 - Photoelectric/Ionization Ac/dc Wire-in - 3K-442006006
    Photoelectric sensor is generally faster at detecting smoldering fires, and somewhat more resistant to common household nuisance alarms.

    Features:

  • Photoelectric Sensor
  • Silence/Test Feature
  • Side Battery Drawer for Easy Removal
  • 9V Battery Included
  • 10-Year Limited Warranty On Alarm
  • 3K-442006-006 PI2000 - Photoelectric/Ionization Ac/dc Wire-in - 3K-442006006

    KIDDE 3K-44200702 PI9000 - Photoelectric/Ionization - 9V Only - 3K-44200702 KIDDE 3K-PE120 Photo Electric Smoke Alarm 9U Backup - 3K-PE120
    3K-44200702 PI9000 - Photoelectric/Ionization - 9V Only - 3K-44200702

    3K-PE120 Photo Electric Smoke Alarm 9U Backup - 3K-PE120


    The Kidde PE120 is a 120VAC powered photoelectric smoke alarm with 9V battery back up. This advanced smoke alarm has the ability to function as a stand-alone unit or in an interconnected system. The Kidde PE120 includes a test button, quick-connect power harness and offers a 10-year limited warranty. This alarm uses photoelectric sensing technology. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner that photoelectric alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. The Kidde PE120 120VAC includes a 9V battery backup, providing continuous protection even during a power failure and includes a quick connect power harness making installation simple

    Silent Knight SD505-APS Addressable Photoelectric Smoke Detector Silent Knight SD505-DUCT Addressable Duct Smoke Detector & Housing

    Model SD505-APS Addressable Photoelectric Type Smoke Detector

    The SD505-APS is particularly suited to detecting dense smoke typical of fires involving materials such as soft furnishings, plastic, foam or other similar materials which tend to smolder and produce large visible smoke particles.

    The detector features automatic compensation for contamination and a simple detector sensitivity test procedure that can be run from the panel or remotely (using the IntelliKnight 5590 or 5595 software with a Windows TM based computer).

    Operation
    The SD505-APS unit is made up of an LED light source and a silicon photo diode receiving element. In a normal standby condition, the receiving element receives no light from the pulsing light source. In the event of fire, smoke enters the detector and light is reflected from the smoke particles to the receiving element. The light received is converted into an electronic signal. Under normal conditions, the status LED blinks approximately every 15 seconds, indicating that the head is communicating with the loop. The LED lights continuously during the alarm period.

    Features

    • Low profile, 2 inches, including base
    • Simple and reliable addressing without mechanical switches
    • Automatic compensation for sensor contamination
    • Built-in fire test feature
    • Simple detector sensitivity testing through the control panel or remotely through a Windows- based computer. (5590 or 5595 software required for remote testing.)
    • Adjustable sensitivity
    • Vandal-resistance locking features
    • Field cleanable

    Specifications

    Operating Voltage: 17-41 VDC

    Current Consumption:
    Standby: .55 mA
    Alarm: .55 mA

    Ambient Temperature: 32°F to 122°F, (0°C to 50°C)

    Mounting: 4” SQR, 4” OCT, Single gang mud ring

     

    Downloads:

    SD505-DUCT Addressable Duct Smoke Detector & Housing

    The SD505DUCT addressable duct smoke detector including the SD505-APS Photoelectric Smoke Sensor is used for detecting smoke and products of combustion present in air moving through HVAC air handling system. When smoke is detected in a duct, the unit communicates the condition to the IntelliKnight control panel. The panel, in turn, depending on programming and wiring, turns off fans, blowers, and other devices. Now there's even more power and flexibility available to the IntelliKnight family of products!

    Ademco 5192SDT Addressable Photoelectric Smoke Detector with Integral Heat Sensor Bosch D263 Two-wire Photoelectric Smoke Detector
    DISCONTINUED REPLACED BY 5193SDT Addressable Photoelectric Smoke Detector with Integral Heat Sensor

    The ADEMCO 5192 Series low profile, addressable V-Plex smoke detectors deliver state-of the-art features and benefits in a cost-effective package. These detectors are designed to provide open area coverage and are compatible with ADEMCO’s VISTA controls supporting V-Plex technology.

    An LED on the detector will blink periodically during normal conditions, remain on steady during alarm and cease to pulse if the chamber is out of acceptable sensitivity range.

    An extremely powerful feature available within the 5192 Series is the Automatic Maintenance Alert/Reporting capability - a feature normally found in today’s high end analog addressable systems. The detectors continually monitor their own sensitivity levels in addition to the basic normal and alarm conditions.

    These HIGH and LOW SENSITIVITY signals are communicated back to the control, via the V-Plex addressable loop, to indicate locally and at the central station that the detector may not be able to detect smoke or may false alarm. This feature works with Vista-32FB, 128FB, 128B and First Alert Professional FA1600C.

    More important is the cost saving associated with Automatic Maintenance Reporting. The feature is an approved alternate to NFPA 72 field sensitivity calibration testing that require external test meters. This eliminates the need to schedule inspections to determine detector sensitivity/viability.

    Moreover. the smoke detectors are able to operate on existing wiring. There's no need to run special twisted pair, data grade or shielded wires. That adds up to valuable savings in time and materials!

    • Low profile design
    • V-Plex™ addressable loop device
    • Automatic maintenance reporting
    • Available with integral heat sensor
    • Simple 2 wire installation
    • Tamper resistant
    • DIP switch or serial number programmable
    • Lines on existing or conventional wiring
    REPLACES DS-DS282

    Each of the D263 Series Detector models is UL Listed and works with commercial fire protective signaling and household fire warning systems. Each model detects smoke particles produced during wood, paper, and fabric combustion. During a fire, smoke particles reflect light onto the photodiode. When the photodiode measurements exceed the alarm threshold, the detector signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector.

  • 12 V or 24 V input
  • Designed for commercial or residential use
  • Light emitting diodes (LEDs) indicate the status of the chamber, power, and alarm
  • Removable terminal block to simplify wiring connections
  • Cable connection point for voltmeter sensitivity test
  • Trim Plate TP280 for retrofit and remodeling purposes
  • Bosch D263TH Two-wire Photoelectric Smoke Detector with 135°F (57°C) heat sensor Bosch D263THC Two-wire Photoelectric Smoke Detector with 135°F (57°C) heat sensor and auxiliary relay
    REPLACES DS-DS282TH

    Each of the D263 Series Detector models is UL Listed and works with commercial fire protective signaling and household fire warning systems. Each model detects smoke particles produced during wood, paper, and fabric combustion. During a fire, smoke particles reflect light onto the photodiode. When the photodiode measurements exceed the alarm threshold, the detector signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector.

  • 12 V or 24 V input
  • Designed for commercial or residential use
  • Light emitting diodes (LEDs) indicate the status of the chamber, power, and alarm
  • Removable terminal block to simplify wiring connections
  • Cable connection point for voltmeter sensitivity test
  • Trim Plate TP280 for retrofit and remodeling purposes
  • REPLACES DS-DS282THC

    Each of the D263 Series Detector models is UL Listed and works with commercial fire protective signaling and household fire warning systems. Each model detects smoke particles produced during wood, paper, and fabric combustion. During a fire, smoke particles reflect light onto the photodiode. When the photodiode measurements exceed the alarm threshold, the detector signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector.

  • 12 V or 24 V input
  • Designed for commercial or residential use
  • Light emitting diodes (LEDs) indicate the status of the chamber, power, and alarm
  • Removable terminal block to simplify wiring connections
  • Cable connection point for voltmeter sensitivity test
  • Trim Plate TP280 for retrofit and remodeling purposes
  •    
     
    Photoelectric Smoke Detectors for Fire Alarm Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please