You are here: Home > CCTV / Surveillance > Point of Sale POS
We found 6 results matching your criteria.
Choose a sub category:
Dedicated Micros Honeywell
I3 DVR

Point of Sale (POS) for CCTV Surveillance Systems


Point of Sale (POS) equipment is a valuable addition to any cash business interested in security. POS software and hardware are used to monitor cash registers, ATMs, and other point of sale areas where theft is a possibility. Security Store USA carries POS equipment from top suppliers and which employs advanced capabilities. POS equipment is able to deliver real time audio, video motion detection, quad display, and other functions. If POS security is important to you, rely on Security Store USA to provide the goods.
Sort By:
Page of 1
AVE AP-P2RS Cash Register Interface - Parallel to Serial Converter AVE AP-PIPC Color Quater Quad with Picture in a Picture

Cash Register Interface - Parallel to Serial Converter

The P-2-RS coverts high speed parallel data to serial data and sends the data out through the RS-232 port to the VSI+ text converter which overlays this data onto video.

Color Quater Quad with Picture in a Picture

The AVE Color PiPc is a state-of-the-art picture in a picture device. This unit is designed specially for the security industry. Automatic inset picture enabling or swapping the pictures full-screen can be initiated by an alarm input. Simple front panel push buttons can also turn on or off the inset picture, swap pictures and even freeze the picture. When something of interest occurs and you want to freeze it, simply press the appropriate button and the picture is held until you release it. For clarity in viewing an inset picture, a user selectable border can be enabled around the inset in white, black, green, red, blue, or none. The Color PiPc gives you two selectable inset picture sizes: 1/9th and 1/16th the size of the monitor area. Either of these size pictures can be positioned anywhere on-screen using the front panel buttons.

The Color PiPc also allows the user to size and position the inset picture independently in both swap modes. This means you can have a 1/9th picture in the top left part of the screen with border white and when you swap pictures, the new inset might be 1/16th size in the bottom left of the picture with no border. This feature makes maximum possible use of the viewable screen for each camera. All of these parameter settings are backed up for a minimum of 90 days by a rechargeable battery.

AVE VSI-PRO Cash Register to Video Interface AVE VSSI-PRO ATM to Video Interface

AVE VSIPRO Cash Register to Video Interface

VSI-PRO Cash Register Interface is easily installed into any new or existing CCTV systems. It can help detect cash register / EPOS system theft and fraud by displaying transaction text details and alarm events on the CCTV picture.

VSI Pro offers alarm outputs, exception history with a time and date stamp. The EX function gives hard alarm outputs (contact closures). This alarm can trigger a VCR or switcher to home to a camera watching a particular cash register, Quad or a Speed Dome to go to a preset position when certain types of exceptional transactions are detected. The alarm outputs are accessed through the DB-9 connector which plugs into the rear of the VSI.

  • Easy Menu driven Set up and programming
  • Auto Baud Rate detection - eliminates internal dip switch setting
  • 24 Field programmable
  • Numeric ranges tied to Exceptions for greater than, less than, inside a range of numbers or outside a range
  • On-Screen flagging of Exceptions
  • Programmable alarm and flag durations
  • Serial printer output of data or Exceptions
  • Programmable delay screen blanking
  • Your choice of 1 to 9 lines displayed on screen
  • On-Screen titler up to 40 Characters
  • Grey scale and border selection from front panel
  • Built-in test mode
  • Built-in cash register demo
  • Direct connection to MV-DR100 & MV-DR200 DVR's
  • Connction of multiple VSI Pro's Via VSI-ServerAP-VSIPRO UP-GRADE OF VSIPRO REGISTER INTERFACE
  • AVE VSSIPRO ATM to Video Interface

    American Video Equipment’s Video Serial Interface for Automatic Teller Machines connects between the modem and the ATM or to the External Camera Controller port on the ATM. The interface monitors the data stream from the ATM and inserts printer or display data from the receipt into the video picture.

    • Time/Date On-screen On/OffTime/Date Genlock to Host Computer
    • Time/Date Stamp on Exception output
    • 32K Battery Backed SRAM
      • Improved buffer for new fast networks
      • Exception buffering and downloading/printing
    • Auto Poll Select Address Setup
    • Auto Network Configure SDLC or Bisync
    • Printer Output
    • 2 Programmable Alarm Outputs
    • Card Reader Contact Input
    • Programmable triggered text provides for serial output for the control of VCR, multiplexor, matrix, PTZ, access system, etc.
    • 24 Exceptions
      • Remove unwanted data from screen
      • Alarm certain types of transactions
      • Send certain transactions to printer
    • Plus all the features of the VSI+ Version 11.00 release
    034030K AP-VSSIPRO ATM INTERFACE
    Geovision Graphic Mode POS Dongle 1 Port 55-POSTO-DV1 Geovision Graphic Mode POS Dongle 2 Port 55-POSTO-DV2
    Loss prevention in the retail businesses is concerned with inventory shrinkage and the shortage of currency. Losses related to POS transactions can be a main cause of the shrinkage for the most part. An effective POS-DVR surveillance solution can help employers deal with these situations.

    The GeoVision POS-DVR surveillance system uses video text overlay technology to provide visual contextual awareness that helps reduce shrinkage and protect asset against business losses. While working in conjunction with GV-Data Capture, the GV-Series surveillance system can turn into a POS/DVR surveillance system, which helps you with tools to remotely monitor cashier area, associate POS transaction data with videos, record videos for retroactive analysis, and even output alarms for emergency events.
    Loss prevention in the retail businesses is concerned with inventory shrinkage and the shortage of currency. Losses related to POS transactions can be a main cause of the shrinkage for the most part. An effective POS-DVR surveillance solution can help employers deal with these situations.

    The GeoVision POS-DVR surveillance system uses video text overlay technology to provide visual contextual awareness that helps reduce shrinkage and protect asset against business losses. While working in conjunction with GV-Data Capture, the GV-Series surveillance system can turn into a POS/DVR surveillance system, which helps you with tools to remotely monitor cashier area, associate POS transaction data with videos, record videos for retroactive analysis, and even output alarms for emergency events.
       
     
    Point of Sale (POS) for CCTV Surveillance Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please