Home > Shop Brands > Potter > Fire Systems > Voice Evacuation >

 

Potter PFC-5004 Fire Alarm Control Panel



Potter PFC-5004 Fire Alarm Control Panel


 

Our Price : $333.83

UPC Code: 785192009177

Product Code: 503262

Qty:

Description
 
PFC5004 Fire Alarm Control Panel

PFC-5004 FIRE ALARM CONTROL PANEL

3992015 PFC-5004 Four Zone Microprocessor Based Fire Alarm Control Panel c/w 4 Class B (Style B) or 2 Class A (Style D) Initiating Circuits, 2 Class A/B (Style Z/Y) Indicating Circuits and a 2.75 Amp Power Supply. Allows for one DACT-5000 Digital Communicator or one PR-5000 Polarity Reversal Module or one ARM-4 or ARM-8 Relay Adder Module. Red enclosure c/w keylock door.

Features
4 Class B (Style B) Initiating Circuits which may be configured as 2 Class A (Style D) circuits.
2 Class A/B (Style Z/Y) Indicating Circuits with individual trouble indicators 1.7 Amp max. per circuit (2.4 Amp total)
Each Indicating Circuit can be configured as Silenceable or Non-Silenceable
Audibles may be configured as Steady, Temporal Code, California Code or March Time
Predefined Initiating circuits can be configured as Waterflow or Latching/Non-Latching Supervisory
Auxiliary relay contacts for Common Alarm, Common Trouble and Common Supervisory. If no Supervisory circuits are enabled, the Supervisory relay becomes a second Alarm relay.
Individual Zone Disconnect Switches
Built-in RS-485 Interface for RA8F Multiplexed Remote Annunciators (Up to 3 Annunciators)
Interface for Remote Trouble Indicator
Built-in Walk Test operation
Auto Signal Silence
Selectable Alarm Verification on Initiating Circuits
Selectable Retard operation on Water Flow circuit
2.75 Amp Power Supply
Output for 4-wire resettable regulated smoke power supply of 24 VDC 100mA maximum Output for PRTI or Remote Annunciators of 24VDC, 300mA unfiltered
Extensive Transient Protection
Easy configuration via DIP switches

Potter's PFC-5004 Fire Alarm Control Panel is a microprocessor based unit designed for small commercial, residential, institutional and industrial occupancies. Fully configurable using DIP switches, it enables the user to configure the system to meet their specific requirements.

The PFC-5004 comes standard with 4 Class B (Style B) Initiating Circuits which may be configured as 2 Class A (Style D) circuits. In addition it comes equipped with 2 Class A/B (Style Z/Y) Indicating circuits which are each rated at 1.7 Amps. The panel also includes a 2.75 Amp Power Supply which powers the system and supplies a 4-wire resettable regulated smoke power supply of 24 VDC 100mA maximum.

The PFC-5004 utilizes a simple DIP switch configuration which allows for the programming of the initiating and indicating circuits as well as the enabling and disabling of system functions such as Signal Silence, Fire Drill and Auxiliary Disconnect. Some predefined Initiating circuits can optionally be configured as Waterflow or Latching/Non-Latching Supervisory. In addition the PFC-5004 allows for Alarm Verification on the Initiating circuits. The Indicating circuits may be configured as Silenceable or Non-Silenceable with the audibles configured for Steady, March-Time, Temporal Code, or California Code. The PFC-5004 is equipped with auxiliary relay contacts for Common Alarm, Trouble and Supervisory. If no Supervisory circuits are enabled, The Supervisory relay becomes a second Alarm relay.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Potter > Fire Systems > Voice Evacuation
Shop Brands > Potter > Fire Systems
Burglar Alarms / Intrusion >

Control Panels for Burglar Alarm Systems

>

Wired Control Panels for Burglar Alarm Systems

> Potter
Fire Alarms > Fire Alarm Control Panels
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please