PFC-5004E FIRE ALARM CONTROL PANEL

Features
• 4 Class B (Style B) Initiating Circuits which may be configured as 2 Class A (Style D) circuits. Expandable up to 8 Class B (Style B) or 4 Class A (Style D) Initiating Circuits
• 2 Class A/B (Style Z/Y) Indicating Circuits with individual trouble indicators (1.7 Amps max. per circuit.) Expandable up to 4 Class A/B (Style Z/Y) Indicating circuits
• Each Indicating Circuit can be configured as Silenceable or Non-Silenceable
• Audibles may be configured as Steady, Temporal Code, California Code or March Time
• Predefined Initiating Circuits can be configured as Waterflow or Latching/Non- Latching Supervisory
• Auxiliary relay contacts for Common Alarm, Common Trouble and Common Supervisory.
• If no Supervisory circuits are enabled, the Supervisory relay becomes a second Alarm relay.
• Zone Disconnect Switches
• Built-in RS-485 Interface for RA8F Multiplexed Remote Annunciators (Up to 3 Annunciators)
• Interface for Remote Trouble Indicator
• Built-in Walk Test operation
• Auto Signal Silence
• Selectable Alarm Verification on Initiating Circuits
• 5 Amp Power Supply
• Output for 4-wire resettable regulated smoke power supply of 24 VDC 100mA maximum.
• Output for PRTI or Remote Annunciators of 24VDC, 300mA max, unfiltered
• Extensive Transient Protection
• Easy configuration via DIP switches

Potter's PFC-5004E Fire Alarm Control Panel is a microprocessor based unit designed for small to medium commercial, residential, institutional and industrial occupancies. Fully configurable using DIP switches, it enables the user to configure the system to meet their specific requirements.

The PFC-5004E comes standard with 4 Class B (Style B) Initiating Circuits which may be configured as 2 Class A (Style D) circuits. In addition, it comes equipped with 2 Class A/B (Style Z/Y) Indicating circuits which are each rated at 1.7 amps. The PFC-5004E can be expanded up to 8 Class B (Style B) or 4 Class A (Style D) Initiating Circuits and 4 Class A/B (Style Z/Y) Indicating circuits with the addition of a ZA-42 Adder Circuit Module. The panel also INCLUDES A 5 Amp Power Supply which powers the system and supplies a 4-wire resettable regulated smoke power supply of 24 VDC 100mA maximum.

The PFC-5004E utilizes a simple DIP switch configuration for programming initiating and indicating circuits as well as the enabling and disabling of system functions such as Signal Silence, Fire Drill and Auxiliary Disconnect. Some predefined initiating circuits can optionally be configured Waterflow or Latching/Non-Latching Supervisory. In addition, the PFC-5004E allows for Alarm Verification on the initiating circuits. The indicating circuits may be configured as Silenceable or Non-Silenceable with the audibles configured for Steady, March-Time, Temporal Code, or California Code.

3992020 PFC-5004E Four expandable to Eight Zone Microprocessor Based Fire Alarm

Control Panel c/w 4 Class B (Style B) or 2 Class A (Style D) Initiating Circuits, 2 Class A/B (Style Z/Y) Indicating Circuits and a 5 Amp Power Supply. Expandable up to 8 Class B (Style B) Initiating Circuits or 4 Class A (Style D) and 4 Class A/B (Style Z/Y) Indicating Circuits. Allows for one DACT-5000 Communicator or one PR-5000 Priority Reversal Module